Overview

The Verus Engineering Dual-Element Dive Plane Kit adds front-end downforce without needing to move the front splitter further forward or lower — useful if you still drive your GT350 or GT350R on the street as well as the track. They shift aero balance forward and increase front downforce while introducing minimal drag, largely by improving evacuation out of the front wheel wells.

Designed from scan data for excellent fit, and supplied with templates to ensure correct installation position.

Construction is 1.5mm thick pre-preg, autoclave cured, 2x2 twill carbon with a gloss clear finish.

Note: only compatible with the OEM GT350 bumper.

What's Included

• Dive Plane, right-hand top
• Dive Plane, left-hand top
• Dive Plane, left-hand bottom
• Dive Plane, right-hand bottom
• 3M VHB double-sided tape (4 pieces, one per dive plane)
• Paper template

Features

• Reduces lift / increases downforce
• Shifts aero balance forward
• Allows fine tuning of aero balance toward the front
• Helps seal the sides of the car
• Evacuates air from the front of the wheel well

Specifications

• CFD optimized design
• Pre-preg, 2x2 twill, autoclave cured carbon fiber
• 3M double-sided tape install — no holes required
• Install template included

The Engineering

OpenFOAM analysis was used to improve performance, specifically targeting vortex generation to improve front fender well evacuation and seal the side of the car — effective dive planes that don't hurt the rest of the car's performance. Part of the Ventus packages for the GT350.

Part Number: A0276A