{"title":"Underbody Panels","description":"\u003cp\u003eUnderbody parts flatten and manage the airflow under the car so it passes cleanly instead of catching on suspension arms, exhaust and the transmission tunnel.\u003c\/p\u003e\u003cp\u003eFlat underbody panels, rear suspension and differential covers, transmission tunnel covers, control arm guide strakes, turning vanes, fender evacuation kits and front wheel deflectors. This is the unglamorous half of an aero package, and usually the half that makes a rear diffuser actually work.\u003c\/p\u003e\u003cp\u003eFitment is chassis-specific. Send us the year, make and model, or see the full range in \u003ca href=\"\/collections\/aerodynamics\"\u003eAerodynamics\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"rear-suspension-diff-covers-toyota-gr86-subaru-brz","title":"Rear Suspension\/Diff Covers - Toyota GR86\/Subaru BRZ","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Verus Engineering Rear Suspension and Differential Cover kit completes the rear diffuser by feeding it clean, uninterrupted airflow. Its primary effect is reducing drag along the underbody.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D to extract more performance from the available build volume, increasing downforce and reducing drag. In-house scan data gives a near-OEM fit and finish.\u003c\/p\u003e\n\u003cp\u003eDesigned for owners looking to get the most from their diffuser and reduce drag.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e requires part number A0414A (Rear Diffuser) for complete compatibility.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLeft-hand suspension cover\u003c\/li\u003e\n\u003cli\u003eRight-hand suspension cover\u003c\/li\u003e\n\u003cli\u003eAssociated brackets\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all necessary parts for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces drag\u003c\/li\u003e\n\u003cli\u003eFeeds the diffuser clean air\u003c\/li\u003e\n\u003cli\u003eReduces lift \/ increases downforce\u003c\/li\u003e\n\u003cli\u003eIncreases fuel economy\u003c\/li\u003e\n\u003cli\u003eReduces lap times\u003c\/li\u003e\n\u003cli\u003eSimple, non-invasive bolt-on design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD optimized design\u003c\/li\u003e\n\u003cli\u003e5052-H32 sheet aluminum composition\u003c\/li\u003e\n\u003cli\u003eCNC press brake bent\u003c\/li\u003e\n\u003cli\u003ePowder-coated black for durability\u003c\/li\u003e\n\u003cli\u003eStainless and nylon hardware throughout\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003ePart of the Ventus 1 package, designed to improve aerodynamic performance over factory in a safe, balanced way. Ventus 1 suits the enthusiast who frequents track days and wants an effective package that balances the car at speed — every component was designed to work together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0479A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556037620010,"sku":"A0479A","price":349.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0479A_5D_20Rear_20Suspension-Diff_20Covers_20-_20Toyota_20GR86-Subaru_20BRZ.jpg?v=1789001821"},{"product_id":"transmission-tunnel-cover-brz-frs-gt86-gr86","title":"Transmission Tunnel Cover - BRZ\/FRS\/GT86\/GR86","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Verus Engineering Transmission Tunnel Cover closes off a turbulent section of the underbody around the transmission. Expect a decrease in drag and an increase in diffuser efficiency once installed. If the car is running rake, you'll also see an increase in downforce.\u003c\/p\u003e\n\u003cp\u003eOEM CAD data was used during design, resulting in a near-OEM fit and finish. Built for owners looking to reduce drag and clean up underbody airflow.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTransmission Tunnel Cover, front\u003c\/li\u003e\n\u003cli\u003eTransmission Tunnel Cover, rear\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all pieces for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces drag\u003c\/li\u003e\n\u003cli\u003eFeeds the diffuser clean air\u003c\/li\u003e\n\u003cli\u003eReduces lift \/ increases downforce if the vehicle has rake\u003c\/li\u003e\n\u003cli\u003eIncreases fuel economy\u003c\/li\u003e\n\u003cli\u003eReduces lap times\u003c\/li\u003e\n\u003cli\u003eModular design accommodates varying resonators, exhausts and applications\u003c\/li\u003e\n\u003cli\u003eRivet nuts and rivet nut installer included\u003c\/li\u003e\n\u003cli\u003eSimple, non-invasive bolt-on design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCNC laser cut\u003c\/li\u003e\n\u003cli\u003e5052 aluminum construction\u003c\/li\u003e\n\u003cli\u003ePowder-coated black for durability\u003c\/li\u003e\n\u003cli\u003eStainless and nylon hardware throughout\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eSimple in operation: it reduces the car's coefficient of drag by 0.008 — 8 points — by cutting turbulence in an otherwise open section of underbody. With rake, that flat area starts acting as a diffuser, as does the rest of the underbody, adding downforce. Works alongside either Ventus kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0044A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Subaru BRZ, Scion FRS, Toyota GT86 and Toyota GR86.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556042797354,"sku":"A0044A","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0044A_5D_20Transmission_20Tunnel_20Cover_20-_20BRZ-FRS-GT86-GR86.jpg?v=1789001857"},{"product_id":"front-wheel-deflector-kit-brz-frs-gt86","title":"Front Wheel Deflector Kit - BRZ\/FRS\/GT86","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Verus Engineering Front Wheel Deflectors improve vehicle handling at high speed. By reducing the airflow reaching the wheel well and hitting the front wheel directly, they cut drag; by redirecting that airflow toward the underbody, they also increase downforce.\u003c\/p\u003e\n\u003cp\u003eProduced from sheet aluminum and attached using OE hardware, they're designed to work with or without the Verus front splitter.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D to extract more performance from the available build volume.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront Wheel Deflector, left-hand side\u003c\/li\u003e\n\u003cli\u003eFront Wheel Deflector, right-hand side\u003c\/li\u003e\n\u003cli\u003eFront Wheel Deflector Add-On, OE bumper (2)\u003c\/li\u003e\n\u003cli\u003eFront Wheel Deflector Add-On, splitter (2)\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all necessary pieces for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces lift \/ increases downforce\u003c\/li\u003e\n\u003cli\u003eReduces airflow reaching the wheel well\u003c\/li\u003e\n\u003cli\u003eReduces drag\u003c\/li\u003e\n\u003cli\u003eReduces lap times\u003c\/li\u003e\n\u003cli\u003eIncreases fuel economy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD optimized design\u003c\/li\u003e\n\u003cli\u003eCNC laser cut, CNC press bent\u003c\/li\u003e\n\u003cli\u003e5052 aluminum construction\u003c\/li\u003e\n\u003cli\u003ePowder-coated for durability\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe deflectors reduce airflow hitting the front tires and entering the wheel well, cutting drag and reducing the lift generated in that area of the underbody.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0022A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556265586986,"sku":"A0022A","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0022A_5D_20Front_20Wheel_20Deflector_20Kit_20-_20BRZ-FRS-GT86.jpg?v=1789004498"},{"product_id":"rear-suspension-diff-covers-brz-frs-gt86","title":"Rear Suspension\/Diff Covers - BRZ\/FRS\/GT86","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Verus Engineering Rear Suspension and Differential Cover kit completes the rear diffuser by feeding it clean, uninterrupted airflow. Its primary effect is reducing drag along the underbody.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D to extract more performance from the available build volume, increasing downforce and reducing drag. In-house scan data gives a near-OEM fit and finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e for complete compatibility, must be installed with the Verus Rear Diffuser (A0012A \/ A0030A). When installing alongside OEM JDM underbody panels, slight trimming of those panels is required.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLeft-hand suspension cover\u003c\/li\u003e\n\u003cli\u003eRight-hand suspension cover\u003c\/li\u003e\n\u003cli\u003eAssociated brackets\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all necessary parts for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces drag\u003c\/li\u003e\n\u003cli\u003eFeeds the diffuser clean air\u003c\/li\u003e\n\u003cli\u003eReduces lift \/ increases downforce\u003c\/li\u003e\n\u003cli\u003eIncreases fuel economy\u003c\/li\u003e\n\u003cli\u003eReduces lap times\u003c\/li\u003e\n\u003cli\u003eSimple, non-invasive bolt-on design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD optimized design\u003c\/li\u003e\n\u003cli\u003e5052-H32 sheet aluminum composition\u003c\/li\u003e\n\u003cli\u003eCNC press brake bent\u003c\/li\u003e\n\u003cli\u003ePowder-coated black for durability\u003c\/li\u003e\n\u003cli\u003eStainless and nylon hardware throughout\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003ePart of the Ventus 1 package, designed to improve aerodynamic performance over factory in a safe, balanced way for the enthusiast who frequents track days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0016A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556265980202,"sku":"A0016A","price":349.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0016A_5D_20Rear_20Suspension-Diff_20Covers_20-_20BRZ-FRS-GT86.jpg?v=1789004514"},{"product_id":"rear-suspension-cover-kit-miata-mx5-nd","title":"Rear Suspension Cover Kit - Miata MX5 (ND)","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Verus Engineering Rear Suspension Covers complete the rear diffuser by feeding it clean, uninterrupted airflow, letting the diffuser work better. Their main job is reducing vehicle drag, which they do well.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D to confirm the covers work as intended, and in-house scan data gives a near-OEM fit and finish.\u003c\/p\u003e\n\u003cp\u003eThey improve rear-end downforce while increasing fuel economy and straight-line speed on track.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e must be installed with the Rear Diffuser (A0054A). Without the diffuser, the covers cannot be fully mounted.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear Suspension Cover, right-hand\u003c\/li\u003e\n\u003cli\u003eRear Suspension Cover, left-hand\u003c\/li\u003e\n\u003cli\u003eBracket\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces drag\u003c\/li\u003e\n\u003cli\u003eFeeds the diffuser clean air\u003c\/li\u003e\n\u003cli\u003eReduces lift \/ increases downforce\u003c\/li\u003e\n\u003cli\u003eIncreases fuel economy\u003c\/li\u003e\n\u003cli\u003eReduces lap times\u003c\/li\u003e\n\u003cli\u003eSimple, non-invasive bolt-on design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD optimized design\u003c\/li\u003e\n\u003cli\u003e5052-H32 sheet aluminum composition\u003c\/li\u003e\n\u003cli\u003eCNC press brake bent\u003c\/li\u003e\n\u003cli\u003ePowder-coated black for durability\u003c\/li\u003e\n\u003cli\u003eStainless and nylon hardware throughout\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe covers close a large gap between the belly pan and the rear diffuser, cutting drag and improving the diffuser's ability to function. Part of the Ventus 1 package for the ND Miata, where every component was designed to work together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0099A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556650381610,"sku":"A0099A","price":329.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0099A_5D_20Rear_20Suspension_20Cover_20Kit_20-_20Miata_20MX5_20_28ND_29.jpg?v=1789008975"},{"product_id":"flat-underbody-panel-kit-miata-mx5-nd","title":"Flat Underbody Panel Kit - Miata MX5 (ND)","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Verus Engineering Flat Underbody Panels finish what Mazda started, filling the voids in the Miata's underbody. The middle of a car creates significant drag, and closing these areas cuts it.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D to extract more performance from the available build volume. In-house scan data gives a near-OEM fit and finish.\u003c\/p\u003e\n\u003cp\u003eBuilt for owners looking to get the most from their front splitter and rear diffuser.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e does not fit automatic transmission cars.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlat Underbody Panel, front piece\u003c\/li\u003e\n\u003cli\u003eFlat Underbody Panel, rear piece\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces drag\u003c\/li\u003e\n\u003cli\u003eIncreases fuel economy\u003c\/li\u003e\n\u003cli\u003eReduces lap times\u003c\/li\u003e\n\u003cli\u003eFlat underbody\u003c\/li\u003e\n\u003cli\u003eSimple, non-invasive bolt-on design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD tested design\u003c\/li\u003e\n\u003cli\u003eCNC cut, CNC press brake bent\u003c\/li\u003e\n\u003cli\u003ePowder-coated black for durability\u003c\/li\u003e\n\u003cli\u003e5052 aluminum composition\u003c\/li\u003e\n\u003cli\u003eStainless steel hardware throughout\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eSimple in operation: the panels reduce the car's coefficient of drag by 0.010 — 10 points — by cutting turbulence in an otherwise open section of underbody. With rake, that flat area starts acting as a diffuser, adding downforce. Each panel carries a small wicker and cut-out for exhaust and transmission heat extraction to keep underbody temperatures reasonable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0095A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556652970282,"sku":"A0095A","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0095A_5D_20Flat_20Underbody_20Panel_20Kit_20-_20Miata_20MX5_20_28ND_29.jpg?v=1789009004"},{"product_id":"flat-underbody-panel-kit-ford-mustang-shelby-gt350","title":"Flat Underbody Panel Kit - Ford Mustang Shelby GT350","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Flat Underbody Panel Kit dramatically cleans up the underbody of the S550 GT350 and GT350R. Ford did a fine job with the car, but the underbody was a letdown — this is the easy bolt-on solution to flat-bottom it.\u003c\/p\u003e\n\u003cp\u003eCombined with the Fender Evacuation Kit and Turning Vane Kit, the underbody is dramatically cleaned up, reducing drag and increasing downforce.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D, and in-house scan data gives a near-OEM fit and finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e the Flat Underbody Panel Kit requires the Fender Evacuation Kit for complete compatibility. Modification is required if you're running full-length jacking rails. It also works on a regular S550 chassis with slight modification.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Flat Underbody Panel, left side\u003c\/li\u003e\n\u003cli\u003eFlat Underbody Panel, right side\u003c\/li\u003e\n\u003cli\u003e(6) Flat Underbody Brackets\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces drag\u003c\/li\u003e\n\u003cli\u003eIncreases fuel economy\u003c\/li\u003e\n\u003cli\u003eReduces lap times\u003c\/li\u003e\n\u003cli\u003eFlat underbody\u003c\/li\u003e\n\u003cli\u003eSimple, non-invasive bolt-on design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD tested design\u003c\/li\u003e\n\u003cli\u003eCNC cut, CNC press brake bent\u003c\/li\u003e\n\u003cli\u003ePowder-coated black for durability\u003c\/li\u003e\n\u003cli\u003e5052 aluminum construction\u003c\/li\u003e\n\u003cli\u003eStainless steel hardware throughout\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eA large part of the Ventus 1 kit's drag reduction comes from cleaning up the underbody, which this kit does thoroughly. Paired with the turning vanes and fender evacuation kit, drag reduction is substantial with a slight downforce gain from better-controlled flow around the car. A good starting package; the Ventus 2 and 3 kits go further on downforce.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0298A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556699107626,"sku":"A0298A","price":519.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0298A_5D_20Flat_20Underbody_20Panel_20Kit_20-_20Ford_20Mustang_20Shelby_20GT350.jpg?v=1789009294"},{"product_id":"fender-evacuation-kit-ford-mustang-shelby-gt350","title":"Fender Evacuation Kit - Ford Mustang Shelby GT350","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe S550 Shelby offers a lot for the money but falls short on finishing components — the fender liner being one. Ford left a gaping hole in the underbody, and that void pulls high-pressure air into the underbody when it would be far better evacuated out of the wheel well. Hence this kit.\u003c\/p\u003e\n\u003cp\u003eThrough CFD and on-track testing, these units improve fender evacuation, increasing downforce and decreasing drag. Combined with the Ventus 1 kit they reduced the coefficient of drag by \u003cstrong\u003e0.023\u003c\/strong\u003e — a large reduction for a street car.\u003c\/p\u003e\n\u003cp\u003eProduced from ABS plastic for OE-level appearance and longevity, and they bolt on like a factory part with minimal hand tools.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e brackets must be modified if running full-length jacking rails. Also works on a regular S550 chassis with slight modification.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRight-hand Fender Evacuator\u003c\/li\u003e\n\u003cli\u003eLeft-hand Fender Evacuator\u003c\/li\u003e\n\u003cli\u003e(2) Fender Evacuator Bracket\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces drag by 0.023 — twenty-three points\u003c\/li\u003e\n\u003cli\u003eOptimized design for maximum performance gain\u003c\/li\u003e\n\u003cli\u003eOEM fit and function\u003c\/li\u003e\n\u003cli\u003eVerus Engineering inset logo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3mm thick ABS\u003c\/li\u003e\n\u003cli\u003eSimple install\u003c\/li\u003e\n\u003cli\u003eStainless steel hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe wheel well builds high pressure from the tire's interaction with the air at speed, and that pressure increases lift. The problem worsens with a front splitter diffuser, which both the GT350 and GT350R have. Improving fender well evacuation reduces both lift and drag. Part of the Ventus 1 kit, which focuses on drag reduction; the Ventus 2 and 3 kits target downforce.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0295A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eRequired for the Flat Underbody Panel Kit (A0298A).\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556715852074,"sku":"A0295A","price":409.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0295A_5D_20Fender_20Evacuation_20Kit_20-_20Ford_20Mustang_20Shelby_20GT350.jpg?v=1789009367"},{"product_id":"turning-vane-kit-ford-mustang-shelby-gt350","title":"Turning Vane Kit - Ford Mustang Shelby GT350","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Turning Vane Kit completes the underbody panels for the GT350 and GT350R. It creates strong vortices that improve the performance of the factory or aftermarket rear diffuser, reducing drag and increasing generated downforce. This is the final piece of the Verus underbody puzzle for the Mustang.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D to extract more performance from a typical flat underbody panel kit, and in-house scan data gives a near-OEM fit and finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e does not work without both the Fender Evacuation Kit (A0295A) and the Flat Underbody Panel Kit (A0298A).\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(4) Turning Vane\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces drag\u003c\/li\u003e\n\u003cli\u003eIncreases fuel economy\u003c\/li\u003e\n\u003cli\u003eReduces lap times\u003c\/li\u003e\n\u003cli\u003eCompletes the flat underbody\u003c\/li\u003e\n\u003cli\u003eSimple, non-invasive bolt-on design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD tested design\u003c\/li\u003e\n\u003cli\u003eCNC cut, CNC press brake bent\u003c\/li\u003e\n\u003cli\u003ePowder-coated black for durability\u003c\/li\u003e\n\u003cli\u003e5052 aluminum construction\u003c\/li\u003e\n\u003cli\u003eStainless steel hardware throughout\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003ePart of the Ventus 1 kit. Pairing the flat underbody panels with the turning vanes and fender evacuation kit produces substantial drag reduction plus a slight downforce gain from better-controlled flow around the car.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0297A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556719227178,"sku":"A0297A","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0297A_5D_20Turning_20Vane_20Kit_20-_20Ford_20Mustang_20Shelby_20GT350.jpg?v=1789009383"},{"product_id":"control-arm-guide-strake-kit-corvette-stingray-and-z06-c8","title":"Control Arm Guide Strake Kit - Corvette Stingray and Z06 (C8)","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Control Arm Guide Strakes improve the aero balance of the C8 Corvette. By creating strong vortices in a dirty area of the underbody, they reduce drag and increase downforce by making the underbody work harder.\u003c\/p\u003e\n\u003cp\u003eOn a car equipped with the Verus splitter, Swan Neck UCW rear wing and rear diffuser, these strakes \u003cstrong\u003eincreased total downforce by 3% with no increase in drag\u003c\/strong\u003e. More importantly they shift aero balance forward by 4.5%, which lets you dial in more angle of attack on the rear wing — more downforce at the same balance.\u003c\/p\u003e\n\u003cp\u003eInstallation is simple and completely reversible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e GM part numbers 85642606 and 85642607 are required for installation.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Control Arm Guide Strake, driver side\u003c\/li\u003e\n\u003cli\u003e(1) Control Arm Guide Strake, passenger side\u003c\/li\u003e\n\u003cli\u003e(1) Hardware Kit, including all necessary hardware for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCreates strong vortices that improve performance, especially with a front splitter and rear diffuser fitted\u003c\/li\u003e\n\u003cli\u003eImproved efficiency (L\/D)\u003c\/li\u003e\n\u003cli\u003eIncreased downforce with no drag penalty\u003c\/li\u003e\n\u003cli\u003eInstalls easily into the factory control arms\u003c\/li\u003e\n\u003cli\u003eShifts aero balance forward by 4.5% on Ventus 3 equipped cars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3D printed glass-fiber reinforced ABS for strength and durability\u003c\/li\u003e\n\u003cli\u003eStainless hardware used throughout, with all necessary templates for installation\u003c\/li\u003e\n\u003cli\u003eMade in Indianapolis, U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0810A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Corvette Stingray and Z06 (C8).\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556770935082,"sku":"A0810A","price":109.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0810A_5D_20Control_20Arm_20Guide_20Strake_20Kit_20-_20Corvette_20Stingray_20and_20Z06_20_28C8_29.jpg?v=1789009780"},{"product_id":"flat-underbody-panel-kit-porsche-981-cayman-gt4","title":"Flat Underbody Panel Kit - Porsche 981 Cayman GT4","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eFinishing what Porsche started, these panels fill the void in the 981's underbody. The middle of a car generates drag, and covering those turbulent areas with flat sheet aluminum reduces it significantly. Cleaner airflow to the rear diffuser also lets the diffuser work better.\u003c\/p\u003e\n\u003cp\u003eProduced from sheet aluminum and powder-coated durable black. Pair with the Verus rear diffuser to reduce lift and drag simultaneously.\u003c\/p\u003e\n\u003cp\u003eCFD estimates the panels reduce the coefficient of drag by \u003cstrong\u003e0.007 — 7 points\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e works with other Porsche 981 models, but takes slight modification to mount.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlat Underbody Panel, left-hand\u003c\/li\u003e\n\u003cli\u003eFlat Underbody Panel, right-hand\u003c\/li\u003e\n\u003cli\u003eBracket (2)\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces drag\u003c\/li\u003e\n\u003cli\u003eIncreases gas mileage\u003c\/li\u003e\n\u003cli\u003eImproved diffuser function\u003c\/li\u003e\n\u003cli\u003eFlat underbody\u003c\/li\u003e\n\u003cli\u003eSimple install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCNC cut and bent 5052 aluminum\u003c\/li\u003e\n\u003cli\u003ePowder-coated black for durability\u003c\/li\u003e\n\u003cli\u003eStainless steel hardware throughout\u003c\/li\u003e\n\u003cli\u003eRivet-nut install tool included\u003c\/li\u003e\n\u003cli\u003eProduced in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe panels cover a large gap between the belly pan and the rear diffuser, decreasing underbody drag and improving the diffuser's ability to function. Part of both the Ventus 1 and Ventus 2 packages for the 981 GT4 — Ventus 1 adds downforce with minimal drag increase, Ventus 2 goes considerably further on downforce for drivers wanting the most from their car and tires.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0162A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556809240874,"sku":"A0162A","price":449.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0162A_5D_20Flat_20Underbody_20Panel_20Kit_20-_20Porsche_20981_20Cayman_20GT4.jpg?v=1789010192"},{"product_id":"flat-underbody-cover-kit-porsche-987-cayman","title":"Flat Underbody Cover Kit - Porsche 987 Cayman","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eFinishing what Porsche started, this panel fills the void in the 987's underbody. The middle of a car generates drag, and covering those turbulent areas with flat sheet aluminum reduces it significantly. Feeding the rear diffuser less turbulent air also increases the diffuser's ability to create downforce.\u003c\/p\u003e\n\u003cp\u003eProduced from sheet aluminum and powder-coated durable black. Pair with the Verus rear diffuser to reduce lift and drag simultaneously.\u003c\/p\u003e\n\u003cp\u003eCFD estimates the panel reduces the coefficient of drag by \u003cstrong\u003e0.007 — 7 points\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e brackets for both 987.1 and 987.2 are included in the kit.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlat Underbody Panel\u003c\/li\u003e\n\u003cli\u003eBracket, 987.1 (2)\u003c\/li\u003e\n\u003cli\u003eBracket, 987.2 (2)\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces drag\u003c\/li\u003e\n\u003cli\u003eIncreases gas mileage\u003c\/li\u003e\n\u003cli\u003eFlat underbody\u003c\/li\u003e\n\u003cli\u003eSimple install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCNC cut 5052 aluminum, CNC bent for repeatability\u003c\/li\u003e\n\u003cli\u003ePowder-coated black for durability\u003c\/li\u003e\n\u003cli\u003eStainless steel hardware throughout\u003c\/li\u003e\n\u003cli\u003eRivet-nut install tool included\u003c\/li\u003e\n\u003cli\u003eProduced in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe panel covers a large gap between the belly pan and the rear diffuser, decreasing underbody drag and improving the diffuser's ability to function. Part of both the Ventus 1 and Ventus 2 packages for the 987 Cayman.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0137A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556821987626,"sku":"A0137A","price":429.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0137A_5D_20Flat_20Underbody_20Cover_20Kit_20-_20Porsche_20987_20Cayman.jpg?v=1789010448"},{"product_id":"rear-suspension-cover-kit-wrx-sti-va","title":"Rear Suspension Cover Kit - WRX\/STI (VA)","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Rear Suspension Covers complete the rear diffuser by feeding it clean, uninterrupted airflow. They close a large void in the VA underbody between the gas tank and the Verus rear diffuser.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D to extract more performance from the available build volume, increasing downforce and reducing drag.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuspension Cover, left-hand side\u003c\/li\u003e\n\u003cli\u003eSuspension Cover, right-hand side\u003c\/li\u003e\n\u003cli\u003eSuspension Cover Bracket (2)\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all necessary pieces for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces drag\u003c\/li\u003e\n\u003cli\u003eFeeds the diffuser clean air\u003c\/li\u003e\n\u003cli\u003eReduces lift \/ increases downforce\u003c\/li\u003e\n\u003cli\u003eIncreases fuel economy\u003c\/li\u003e\n\u003cli\u003eSimple, non-invasive bolt-on design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD optimized design\u003c\/li\u003e\n\u003cli\u003e5052 aluminum sheet construction\u003c\/li\u003e\n\u003cli\u003eCNC press brake bent\u003c\/li\u003e\n\u003cli\u003ePowder-coated black for durability\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0026A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits 2015+ Subaru WRX and STI (VA). Designed to work with a Verus rear diffuser — best fitted alongside A0025A or A0028A.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556936184106,"sku":"A0026A","price":349.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0026A_5D_20Rear_20Suspension_20Cover_20Kit_20-_20WRX-STI_20_28VA_29.jpg?v=1789012233"},{"product_id":"carbon-flat-underbody-panel-r35-nissan-gt-r","title":"Carbon Flat Underbody Panel - R35 Nissan GT-R","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe R35 GT-R has a strong coefficient of drag from the factory, but the tunnel area of the underbody is left wide open. Covering that large area further reduces underbody drag, and on cars running rake, Verus measured an increase in downforce as well.\u003c\/p\u003e\n\u003cp\u003eDeveloped using the ANSYS adjoint solver and CFD analysis.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Fiber Underbody Panel\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces underbody drag\u003c\/li\u003e\n\u003cli\u003eCan increase downforce on a raked setup\u003c\/li\u003e\n\u003cli\u003eCarbon fiber construction for low weight\u003c\/li\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD optimized design, developed with the ANSYS adjoint solver\u003c\/li\u003e\n\u003cli\u003ePre-preg carbon fiber construction\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0112A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Nissan GT-R (R35).\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556972917034,"sku":"A0112A","price":999.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0112A_5D_20Carbon_20Flat_20Underbody_20Panel_20-_20R35_20GTR.jpg?v=1789013306"}],"url":"https:\/\/team-anbd.com\/collections\/underbody-panels.oembed","provider":"Team ANBD","version":"1.0","type":"link"}