{"title":"Tesla Performance Parts","description":"\u003cp\u003ePerformance parts for the Tesla Model 3 and Model S.\u003c\/p\u003e\u003cp\u003eGiroDisc two-piece rotors and rings, DBA rotors, EBC pads, and KW coilovers, including DDC kits for cars with electronic dampers.\u003c\/p\u003e\u003cp\u003eTeslas are heavy, and brakes are the first thing to upgrade if the car will see a track. Check whether a part is for RWD, AWD or Performance trims before ordering. Installation available at our shop in Andover, NJ.\u003c\/p\u003e","products":[{"product_id":"girodisc-2017-tesla-model-3-performance-slotted-front-rotors","title":"GiroDisc 2017+ Tesla Model 3 Performance Slotted Front Rotors","description":"\u003cp\u003eGiroDisc two-piece slotted front rotors for the 2017+ Tesla Model 3 Performance. These replace the factory one-piece front rotors with a lighter, rebuildable floating assembly built for repeated track use.\u003c\/p\u003e\u003ch3\u003eWhy a GiroDisc two-piece rotor\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloating two-piece design.\u003c\/strong\u003e A cast iron disc ring is mounted to a central hat with high-strength alloy steel drive pins, so the ring can expand axially and radially with heat instead of fighting the hat. Anti-noise spring washers keep the float silent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6061-T6 aluminum hat.\u003c\/strong\u003e The hat is machined from U.S.-sourced 6061-T6 aircraft-specification aluminum, cutting rotating and unsprung weight against the one-piece factory casting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved internal vanes\u003c\/strong\u003e act as a centrifugal pump, forcing cooling air through the disc on track.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted, not cross-drilled.\u003c\/strong\u003e Slots sweep the pad face clean without the stress risers that make drilled rotors crack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRebuildable.\u003c\/strong\u003e When the iron is worn out you replace the rings only and keep the hats and hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e A1-208\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePriced and sold as a pair — one complete front axle set.\u003c\/li\u003e\n\u003cli\u003eTwo-piece rotor assemblies with aluminum hats, iron rings and all mounting hardware, assembled and ready to bolt on.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787513983274,"sku":"girA1-208","price":1150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/408mm72v__12525.1677861543_cb1a2618-23fd-4ad8-92f5-03dfdfcdd3f8.jpg?v=1790628102"},{"product_id":"girodisc-2017-tesla-model-3-slotted-rear-rotors","title":"GiroDisc 2017+ Tesla Model 3 Slotted Rear Rotors","description":"\u003cp\u003eGiroDisc two-piece slotted rear rotors for the 2017+ Tesla Model 3. These replace the factory one-piece rear rotors with a lighter, rebuildable floating assembly built for repeated track use.\u003c\/p\u003e\u003ch3\u003eWhy a GiroDisc two-piece rotor\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloating two-piece design.\u003c\/strong\u003e A cast iron disc ring is mounted to a central hat with high-strength alloy steel drive pins, so the ring can expand axially and radially with heat instead of fighting the hat. Anti-noise spring washers keep the float silent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6061-T6 aluminum hat.\u003c\/strong\u003e The hat is machined from U.S.-sourced 6061-T6 aircraft-specification aluminum, cutting rotating and unsprung weight against the one-piece factory casting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved internal vanes\u003c\/strong\u003e act as a centrifugal pump, forcing cooling air through the disc on track.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted, not cross-drilled.\u003c\/strong\u003e Slots sweep the pad face clean without the stress risers that make drilled rotors crack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRebuildable.\u003c\/strong\u003e When the iron is worn out you replace the rings only and keep the hats and hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e A2-202\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePriced and sold as a pair — one complete rear axle set.\u003c\/li\u003e\n\u003cli\u003eTwo-piece rotor assemblies with aluminum hats, iron rings and all mounting hardware, assembled and ready to bolt on.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787515392298,"sku":"girA2-202","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/408mm72v__09015.1677861714_51903251-d913-431f-ab73-28a7b68ed1a2.jpg?v=1790628103"},{"product_id":"girodisc-2017-tesla-model-3-performance-slotted-rear-rotors","title":"GiroDisc 2017+ Tesla Model 3 Performance Slotted Rear Rotors","description":"\u003cp\u003eGiroDisc two-piece slotted rear rotors for the 2017+ Tesla Model 3 Performance. These replace the factory one-piece rear rotors with a lighter, rebuildable floating assembly built for repeated track use.\u003c\/p\u003e\u003ch3\u003eWhy a GiroDisc two-piece rotor\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloating two-piece design.\u003c\/strong\u003e A cast iron disc ring is mounted to a central hat with high-strength alloy steel drive pins, so the ring can expand axially and radially with heat instead of fighting the hat. Anti-noise spring washers keep the float silent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6061-T6 aluminum hat.\u003c\/strong\u003e The hat is machined from U.S.-sourced 6061-T6 aircraft-specification aluminum, cutting rotating and unsprung weight against the one-piece factory casting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved internal vanes\u003c\/strong\u003e act as a centrifugal pump, forcing cooling air through the disc on track.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted, not cross-drilled.\u003c\/strong\u003e Slots sweep the pad face clean without the stress risers that make drilled rotors crack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRebuildable.\u003c\/strong\u003e When the iron is worn out you replace the rings only and keep the hats and hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e A2-208\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePriced and sold as a pair — one complete rear axle set.\u003c\/li\u003e\n\u003cli\u003eTwo-piece rotor assemblies with aluminum hats, iron rings and all mounting hardware, assembled and ready to bolt on.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787515425066,"sku":"girA2-208","price":1050.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/408mm72v__09015.1677861714_2ffe84d1-8c0a-4ab7-a354-7db1246330df.jpg?v=1790628104"},{"product_id":"girodisc-2012-tesla-model-s-slotted-front-rotors","title":"GiroDisc 2012+ Tesla Model S Slotted Front Rotors","description":"\u003cp\u003eGiroDisc two-piece slotted front rotors for the 2012+ Tesla Model S. These replace the factory one-piece front rotors with a lighter, rebuildable floating assembly built for repeated track use.\u003c\/p\u003e\u003ch3\u003eWhy a GiroDisc two-piece rotor\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloating two-piece design.\u003c\/strong\u003e A cast iron disc ring is mounted to a central hat with high-strength alloy steel drive pins, so the ring can expand axially and radially with heat instead of fighting the hat. Anti-noise spring washers keep the float silent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6061-T6 aluminum hat.\u003c\/strong\u003e The hat is machined from U.S.-sourced 6061-T6 aircraft-specification aluminum, cutting rotating and unsprung weight against the one-piece factory casting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved internal vanes\u003c\/strong\u003e act as a centrifugal pump, forcing cooling air through the disc on track.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted, not cross-drilled.\u003c\/strong\u003e Slots sweep the pad face clean without the stress risers that make drilled rotors crack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRebuildable.\u003c\/strong\u003e When the iron is worn out you replace the rings only and keep the hats and hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e A1-173\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePriced and sold as a pair — one complete front axle set.\u003c\/li\u003e\n\u003cli\u003eTwo-piece rotor assemblies with aluminum hats, iron rings and all mounting hardware, assembled and ready to bolt on.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787520831786,"sku":"girA1-173","price":1250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/408mm72v__12525.1677861543_64d1f58d-fc2e-4cfa-b405-5ede928bc7de.jpg?v=1790628102"},{"product_id":"girodisc-2017-tesla-model-3-slotted-front-rotors","title":"GiroDisc 2017+ Tesla Model 3 Slotted Front Rotors","description":"\u003cp\u003eGiroDisc two-piece slotted front rotors for the 2017+ Tesla Model 3. These replace the factory one-piece front rotors with a lighter, rebuildable floating assembly built for repeated track use.\u003c\/p\u003e\u003ch3\u003eWhy a GiroDisc two-piece rotor\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloating two-piece design.\u003c\/strong\u003e A cast iron disc ring is mounted to a central hat with high-strength alloy steel drive pins, so the ring can expand axially and radially with heat instead of fighting the hat. Anti-noise spring washers keep the float silent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6061-T6 aluminum hat.\u003c\/strong\u003e The hat is machined from U.S.-sourced 6061-T6 aircraft-specification aluminum, cutting rotating and unsprung weight against the one-piece factory casting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved internal vanes\u003c\/strong\u003e act as a centrifugal pump, forcing cooling air through the disc on track.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted, not cross-drilled.\u003c\/strong\u003e Slots sweep the pad face clean without the stress risers that make drilled rotors crack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRebuildable.\u003c\/strong\u003e When the iron is worn out you replace the rings only and keep the hats and hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e A1-202\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePriced and sold as a pair — one complete front axle set.\u003c\/li\u003e\n\u003cli\u003eTwo-piece rotor assemblies with aluminum hats, iron rings and all mounting hardware, assembled and ready to bolt on.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787521126698,"sku":"girA1-202","price":1050.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/408mm72v__12525.1677861543_b980dec9-dfe8-477a-b862-857743aa3a08.jpg?v=1790628102"},{"product_id":"girodisc-2021-tesla-model-s-plaid-slotted-front-rotors","title":"GiroDisc 2021+ Tesla Model S Plaid Slotted Front Rotors","description":"\u003cp\u003eGiroDisc two-piece slotted front rotors for the 2021+ Tesla Model S Plaid. These replace the factory one-piece front rotors with a lighter, rebuildable floating assembly built for repeated track use.\u003c\/p\u003e\u003ch3\u003eWhy a GiroDisc two-piece rotor\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloating two-piece design.\u003c\/strong\u003e A cast iron disc ring is mounted to a central hat with high-strength alloy steel drive pins, so the ring can expand axially and radially with heat instead of fighting the hat. Anti-noise spring washers keep the float silent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6061-T6 aluminum hat.\u003c\/strong\u003e The hat is machined from U.S.-sourced 6061-T6 aircraft-specification aluminum, cutting rotating and unsprung weight against the one-piece factory casting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved internal vanes\u003c\/strong\u003e act as a centrifugal pump, forcing cooling air through the disc on track.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted, not cross-drilled.\u003c\/strong\u003e Slots sweep the pad face clean without the stress risers that make drilled rotors crack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRebuildable.\u003c\/strong\u003e When the iron is worn out you replace the rings only and keep the hats and hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e A1-273\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePriced and sold as a pair — one complete front axle set.\u003c\/li\u003e\n\u003cli\u003eTwo-piece rotor assemblies with aluminum hats, iron rings and all mounting hardware, assembled and ready to bolt on.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787522470186,"sku":"girA1-273","price":1650.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/408mm72v__12525.1677861543_6133f021-7015-4d80-adc9-fe6078fad629.jpg?v=1790628103"},{"product_id":"girodisc-2012-tesla-model-s-slotted-rear-rotors","title":"GiroDisc 2012+ Tesla Model S Slotted Rear Rotors","description":"\u003cp\u003eGiroDisc two-piece slotted rear rotors for the 2012+ Tesla Model S. These replace the factory one-piece rear rotors with a lighter, rebuildable floating assembly built for repeated track use.\u003c\/p\u003e\u003ch3\u003eWhy a GiroDisc two-piece rotor\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloating two-piece design.\u003c\/strong\u003e A cast iron disc ring is mounted to a central hat with high-strength alloy steel drive pins, so the ring can expand axially and radially with heat instead of fighting the hat. Anti-noise spring washers keep the float silent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6061-T6 aluminum hat.\u003c\/strong\u003e The hat is machined from U.S.-sourced 6061-T6 aircraft-specification aluminum, cutting rotating and unsprung weight against the one-piece factory casting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved internal vanes\u003c\/strong\u003e act as a centrifugal pump, forcing cooling air through the disc on track.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted, not cross-drilled.\u003c\/strong\u003e Slots sweep the pad face clean without the stress risers that make drilled rotors crack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRebuildable.\u003c\/strong\u003e When the iron is worn out you replace the rings only and keep the hats and hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e A2-273\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePriced and sold as a pair — one complete rear axle set.\u003c\/li\u003e\n\u003cli\u003eTwo-piece rotor assemblies with aluminum hats, iron rings and all mounting hardware, assembled and ready to bolt on.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787532955946,"sku":"girA2-273","price":1300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/408mm72v__09015.1677861714_81857401-7bdf-4440-809c-8b5d2f44d3b9.jpg?v=1790628103"},{"product_id":"girodisc-2017-tesla-model-3-slotted-front-rings","title":"GiroDisc 2017+ Tesla Model 3 Slotted Front Rings","description":"\u003cp\u003eGiroDisc replacement cast iron rotor rings for the 2017+ Tesla Model 3, front axle. When the iron is worn or heat-checked, you replace the rings and keep the hats — the reason a two-piece rotor is cheaper to own over time.\u003c\/p\u003e\u003ch3\u003eAbout replacement rings\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRings only — \u003cstrong\u003ealuminum hats are not included\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eNew installation hardware (cap screws, hardened washers and anti-noise spring washers) is supplied. GiroDisc does not recommend reusing old hardware.\u003c\/li\u003e\n\u003cli\u003eSlotted friction surface with curved internal cooling vanes, same specification as the original assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThese rings are machined for GiroDisc hats and will not mount to factory center hats.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e D1-202\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePriced and sold as a pair — one axle set of rings, plus new mounting hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787555336490,"sku":"girD1-202","price":680.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/rings__46899.1689725292_eb671217-32ca-4fad-8dc0-2c8c40e04a84.jpg?v=1790628117"},{"product_id":"girodisc-2017-tesla-model-3-performance-slotted-front-rings","title":"GiroDisc 2017+ Tesla Model 3 Performance Slotted Front Rings","description":"\u003cp\u003eGiroDisc replacement cast iron rotor rings for the 2017+ Tesla Model 3 Performance, front axle. When the iron is worn or heat-checked, you replace the rings and keep the hats — the reason a two-piece rotor is cheaper to own over time.\u003c\/p\u003e\u003ch3\u003eAbout replacement rings\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRings only — \u003cstrong\u003ealuminum hats are not included\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eNew installation hardware (cap screws, hardened washers and anti-noise spring washers) is supplied. GiroDisc does not recommend reusing old hardware.\u003c\/li\u003e\n\u003cli\u003eSlotted friction surface with curved internal cooling vanes, same specification as the original assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThese rings are machined for GiroDisc hats and will not mount to factory center hats.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e D1-208\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePriced and sold as a pair — one axle set of rings, plus new mounting hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787555467562,"sku":"girD1-208","price":780.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/rings__46899.1689725292_f08bf341-9c21-4314-820b-87efd4adb61e.jpg?v=1790628117"},{"product_id":"girodisc-2021-tesla-model-s-plaid-slotted-front-rings","title":"GiroDisc 2021+ Tesla Model S Plaid Slotted Front Rings","description":"\u003cp\u003eGiroDisc replacement cast iron rotor rings for the 2021+ Tesla Model S Plaid, front axle. When the iron is worn or heat-checked, you replace the rings and keep the hats — the reason a two-piece rotor is cheaper to own over time.\u003c\/p\u003e\u003ch3\u003eAbout replacement rings\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRings only — \u003cstrong\u003ealuminum hats are not included\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eNew installation hardware (cap screws, hardened washers and anti-noise spring washers) is supplied. GiroDisc does not recommend reusing old hardware.\u003c\/li\u003e\n\u003cli\u003eSlotted friction surface with curved internal cooling vanes, same specification as the original assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThese rings are machined for GiroDisc hats and will not mount to factory center hats.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e D1-273\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePriced and sold as a pair — one axle set of rings, plus new mounting hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787556090154,"sku":"girD1-273","price":1030.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/rings__46899.1689725292_a6a81c4d-b3a5-4596-9a25-f7455f39a85c.jpg?v=1790628117"},{"product_id":"girodisc-2017-tesla-model-3-slotted-rear-rings","title":"GiroDisc 2017+ Tesla Model 3 Slotted Rear Rings","description":"\u003cp\u003eGiroDisc replacement cast iron rotor rings for the 2017+ Tesla Model 3, rear axle. When the iron is worn or heat-checked, you replace the rings and keep the hats — the reason a two-piece rotor is cheaper to own over time.\u003c\/p\u003e\u003ch3\u003eAbout replacement rings\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRings only — \u003cstrong\u003ealuminum hats are not included\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eNew installation hardware (cap screws, hardened washers and anti-noise spring washers) is supplied. GiroDisc does not recommend reusing old hardware.\u003c\/li\u003e\n\u003cli\u003eSlotted friction surface with curved internal cooling vanes, same specification as the original assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThese rings are machined for GiroDisc hats and will not mount to factory center hats.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e D2-202\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePriced and sold as a pair — one axle set of rings, plus new mounting hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787559006506,"sku":"girD2-202","price":680.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/rings__00934.1689725218_a45cbcee-e172-4727-a26a-ca11da634a50.jpg?v=1790628118"},{"product_id":"girodisc-2017-tesla-model-3-performance-slotted-rear-rings","title":"GiroDisc 2017+ Tesla Model 3 Performance Slotted Rear Rings","description":"\u003cp\u003eGiroDisc replacement cast iron rotor rings for the 2017+ Tesla Model 3 Performance, rear axle. When the iron is worn or heat-checked, you replace the rings and keep the hats — the reason a two-piece rotor is cheaper to own over time.\u003c\/p\u003e\u003ch3\u003eAbout replacement rings\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRings only — \u003cstrong\u003ealuminum hats are not included\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eNew installation hardware (cap screws, hardened washers and anti-noise spring washers) is supplied. GiroDisc does not recommend reusing old hardware.\u003c\/li\u003e\n\u003cli\u003eSlotted friction surface with curved internal cooling vanes, same specification as the original assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThese rings are machined for GiroDisc hats and will not mount to factory center hats.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e D2-208\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePriced and sold as a pair — one axle set of rings, plus new mounting hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787559792938,"sku":"girD2-208","price":680.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/rings__00934.1689725218_0dcd0f29-1a48-4550-88fc-7bb3df09278b.jpg?v=1790628118"},{"product_id":"girodisc-2012-tesla-model-s-slotted-rear-rings","title":"GiroDisc 2012+ Tesla Model S Slotted Rear Rings","description":"\u003cp\u003eGiroDisc replacement cast iron rotor rings for the 2012+ Tesla Model S, rear axle. When the iron is worn or heat-checked, you replace the rings and keep the hats — the reason a two-piece rotor is cheaper to own over time.\u003c\/p\u003e\u003ch3\u003eAbout replacement rings\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRings only — \u003cstrong\u003ealuminum hats are not included\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eNew installation hardware (cap screws, hardened washers and anti-noise spring washers) is supplied. GiroDisc does not recommend reusing old hardware.\u003c\/li\u003e\n\u003cli\u003eSlotted friction surface with curved internal cooling vanes, same specification as the original assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThese rings are machined for GiroDisc hats and will not mount to factory center hats.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e D2-273\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePriced and sold as a pair — one axle set of rings, plus new mounting hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787560448298,"sku":"girD2-273","price":780.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/rings__00934.1689725218_930fc16e-20fb-4d84-9935-6f9f99652a6d.jpg?v=1790628118"},{"product_id":"dba3557s-tesla-model-3-street-series-t2-slotted-rear-brake-rotor","title":"DBA Tesla Model 3 Street Series T2 Slotted Rear Brake Rotor (DBA3557S)","description":"\u003cp\u003eThe DBA Street Series T2 Slotted rear rotor for the Tesla Model 3 is built by Disc Brakes Australia (DBA), a specialist rotor maker with more than 45 years in the business. This one has DBA's T2 slot pattern: CNC-machined slots that give pad dust and gas more places to escape, for a quieter, smoother pedal feel. DBA rotors are sold individually, so order two for a full axle set.\u003c\/p\u003e\u003ch3\u003eRotor details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one-piece rotor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e DBA Street Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace:\u003c\/strong\u003e slotted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter diameter:\u003c\/strong\u003e 335 mm (13.19 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 20 mm (0.79 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall height:\u003c\/strong\u003e 46.5 mm (1.83 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter bore:\u003c\/strong\u003e 70 mm (2.76 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually (one rotor per part number)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDBA part number:\u003c\/strong\u003e DBA3557S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listed by DBA:\u003c\/strong\u003e 17-23 Tesla 3 Rear Street Series Slotted Rotor\u003c\/li\u003e\n\u003cli\u003eBrake packages and rotor sizes vary within a model line, so compare this rotor's 335 mm diameter with your current rotor before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout the DBA Street Series\u003c\/h3\u003e\u003cp\u003eStreet Series is DBA's OE-replacement line: Australian-engineered rotors made to OE standards, finished with a protective paint coating and machined with CBN (cubic boron nitride) tooling for tight thickness variation and parallelism, which reduces the chance of brake shudder.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eDBA rotors are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"DBA","offers":[{"title":"Default Title","offer_id":52936678408490,"sku":"dbaDBA3557S","price":190.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/6f0c4fb74018a8ad53da66d9a1568caa.png?v=1791955198"},{"product_id":"dba42768-tesla-model-s-4000-series-hd-plain-front-brake-rotor","title":"DBA Tesla Model S 4000 Series HD Plain Front Brake Rotor (DBA42768)","description":"\u003cp\u003eThe DBA 4000 Series HD Plain front rotor for the Tesla Model S is built by Disc Brakes Australia (DBA), a specialist rotor maker with more than 45 years in the business. This one has the HD finish, a smooth OE-style face for drivers who want 4000 Series strength without a drilled or slotted look (it also suits race classes that require an OE-style rotor). DBA rotors are sold individually, so order two for a full axle set.\u003c\/p\u003e\u003ch3\u003eRotor details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one-piece vented rotor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e DBA 4000 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace:\u003c\/strong\u003e plain (smooth)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter diameter:\u003c\/strong\u003e 355 mm (13.98 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 32 mm (1.26 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall height:\u003c\/strong\u003e 70.7 mm (2.78 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter bore:\u003c\/strong\u003e 70.15 mm (2.76 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually (one rotor per part number)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDBA part number:\u003c\/strong\u003e DBA42768\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listed by DBA:\u003c\/strong\u003e 12-21 Tesla S Front 4000 Series Standard Rotor\u003c\/li\u003e\n\u003cli\u003eBrake packages and rotor sizes vary within a model line, so compare this rotor's 355 mm diameter with your current rotor before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout the DBA 4000 Series\u003c\/h3\u003e\u003cp\u003eThe 4000 Series is DBA's one-piece performance upgrade. It is cast from XG-150 high-carbon alloyed iron and put through Thermal Stability Profiling (TSP), so the rotor copes with repeated heat cycles in hard braking. Vented versions use DBA's Kangaroo Paw vane layout (144 diamond and teardrop-shaped pillars), which DBA says adds surface area and cooling efficiency compared with a straight-vane design.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eDBA rotors are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"DBA","offers":[{"title":"Default Title","offer_id":52936684372266,"sku":"dbaDBA42768","price":261.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/6b7d43ba13ea7bb02f22bb26498c4249.png?v=1791955318"},{"product_id":"dba42768s-tesla-model-s-4000-series-t3-slotted-front-brake-rotor","title":"DBA Tesla Model S 4000 Series T3 Slotted Front Brake Rotor (DBA42768S)","description":"\u003cp\u003eThe DBA 4000 Series T3 Slotted front rotor for the Tesla Model S is built by Disc Brakes Australia (DBA), a specialist rotor maker with more than 45 years in the business. This one has DBA's T3 slot pattern: precision CNC-machined slots, with more exit points for pad dust and gas than the T2, for a quieter, more consistent pedal. DBA rotors are sold individually, so order two for a full axle set.\u003c\/p\u003e\u003ch3\u003eRotor details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one-piece vented rotor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e DBA 4000 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace:\u003c\/strong\u003e slotted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter diameter:\u003c\/strong\u003e 355 mm (13.98 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 32 mm (1.26 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall height:\u003c\/strong\u003e 70.7 mm (2.78 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter bore:\u003c\/strong\u003e 70.15 mm (2.76 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually (one rotor per part number)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDBA part number:\u003c\/strong\u003e DBA42768S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listed by DBA:\u003c\/strong\u003e 2012+ Tesla Model S Front Slotted 4000 Series Rotor\u003c\/li\u003e\n\u003cli\u003eBrake packages and rotor sizes vary within a model line, so compare this rotor's 355 mm diameter with your current rotor before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout the DBA 4000 Series\u003c\/h3\u003e\u003cp\u003eThe 4000 Series is DBA's one-piece performance upgrade. It is cast from XG-150 high-carbon alloyed iron and put through Thermal Stability Profiling (TSP), so the rotor copes with repeated heat cycles in hard braking. Vented versions use DBA's Kangaroo Paw vane layout (144 diamond and teardrop-shaped pillars), which DBA says adds surface area and cooling efficiency compared with a straight-vane design.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eDBA rotors are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"DBA","offers":[{"title":"Default Title","offer_id":52936684405034,"sku":"dbaDBA42768S","price":344.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/a0f0e902ab3b7161ec7a868791434fa0.jpg?v=1791955318"},{"product_id":"dba42769-tesla-model-s-4000-series-hd-plain-rear-brake-rotor","title":"DBA Tesla Model S 4000 Series HD Plain Rear Brake Rotor (DBA42769)","description":"\u003cp\u003eThe DBA 4000 Series HD Plain rear rotor for the Tesla Model S is built by Disc Brakes Australia (DBA), a specialist rotor maker with more than 45 years in the business. This one has the HD finish, a smooth OE-style face for drivers who want 4000 Series strength without a drilled or slotted look (it also suits race classes that require an OE-style rotor). DBA rotors are sold individually, so order two for a full axle set.\u003c\/p\u003e\u003ch3\u003eRotor details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one-piece vented rotor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e DBA 4000 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace:\u003c\/strong\u003e plain (smooth)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter diameter:\u003c\/strong\u003e 365 mm (14.37 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 28 mm (1.10 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall height:\u003c\/strong\u003e 58 mm (2.28 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter bore:\u003c\/strong\u003e 70.15 mm (2.76 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually (one rotor per part number)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDBA part number:\u003c\/strong\u003e DBA42769\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listed by DBA:\u003c\/strong\u003e 12-16 Tesla S Rear 4000 Series Standard Rotor\u003c\/li\u003e\n\u003cli\u003eBrake packages and rotor sizes vary within a model line, so compare this rotor's 365 mm diameter with your current rotor before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout the DBA 4000 Series\u003c\/h3\u003e\u003cp\u003eThe 4000 Series is DBA's one-piece performance upgrade. It is cast from XG-150 high-carbon alloyed iron and put through Thermal Stability Profiling (TSP), so the rotor copes with repeated heat cycles in hard braking. Vented versions use DBA's Kangaroo Paw vane layout (144 diamond and teardrop-shaped pillars), which DBA says adds surface area and cooling efficiency compared with a straight-vane design.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eDBA rotors are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"DBA","offers":[{"title":"Default Title","offer_id":52936684470570,"sku":"dbaDBA42769","price":300.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/9d946775f00e18b644d05a5d2a04aef4.jpg?v=1791955319"},{"product_id":"dba42769s-tesla-model-s-4000-series-t3-slotted-rear-brake-rotor","title":"DBA Tesla Model S 4000 Series T3 Slotted Rear Brake Rotor (DBA42769S)","description":"\u003cp\u003eThe DBA 4000 Series T3 Slotted rear rotor for the Tesla Model S is built by Disc Brakes Australia (DBA), a specialist rotor maker with more than 45 years in the business. This one has DBA's T3 slot pattern: precision CNC-machined slots, with more exit points for pad dust and gas than the T2, for a quieter, more consistent pedal. DBA rotors are sold individually, so order two for a full axle set.\u003c\/p\u003e\u003ch3\u003eRotor details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one-piece vented rotor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e DBA 4000 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace:\u003c\/strong\u003e slotted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter diameter:\u003c\/strong\u003e 365 mm (14.37 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 28 mm (1.10 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall height:\u003c\/strong\u003e 58 mm (2.28 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter bore:\u003c\/strong\u003e 70.15 mm (2.76 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually (one rotor per part number)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDBA part number:\u003c\/strong\u003e DBA42769S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listed by DBA:\u003c\/strong\u003e 2012+ Tesla Model S Rear T-Slot T3 4000 Series Rotor\u003c\/li\u003e\n\u003cli\u003eBrake packages and rotor sizes vary within a model line, so compare this rotor's 365 mm diameter with your current rotor before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout the DBA 4000 Series\u003c\/h3\u003e\u003cp\u003eThe 4000 Series is DBA's one-piece performance upgrade. It is cast from XG-150 high-carbon alloyed iron and put through Thermal Stability Profiling (TSP), so the rotor copes with repeated heat cycles in hard braking. Vented versions use DBA's Kangaroo Paw vane layout (144 diamond and teardrop-shaped pillars), which DBA says adds surface area and cooling efficiency compared with a straight-vane design.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eDBA rotors are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"DBA","offers":[{"title":"Default Title","offer_id":52936684536106,"sku":"dbaDBA42769S","price":344.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/bea28e522c294b5c2c4796cc4d9b8788.jpg?v=1791955319"},{"product_id":"dba53942blks-tesla-model-3-5000-series-t3-slotted-2-piece-front-brake-rotor","title":"DBA Tesla Model 3 5000 Series T3 Slotted 2-Piece Front Brake Rotor, Black Hat (DBA53942BLKS)","description":"\u003cp\u003eThe DBA 5000 Series T3 Slotted 2-Piece front rotor for the Tesla Model 3 is built by Disc Brakes Australia (DBA), a specialist rotor maker with more than 45 years in the business. This one has DBA's T3 slot pattern: precision CNC-machined slots, with more exit points for pad dust and gas than the T2, for a quieter, more consistent pedal. The hat is finished in black. DBA rotors are sold individually, so order two for a full axle set.\u003c\/p\u003e\u003ch3\u003eRotor details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e two-piece, cast-iron ring with aluminum hat, vented\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e DBA 5000 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace:\u003c\/strong\u003e slotted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHat finish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter diameter:\u003c\/strong\u003e 355 mm (13.98 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 25 mm (0.98 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall height:\u003c\/strong\u003e 63.1 mm (2.48 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter bore:\u003c\/strong\u003e 70 mm (2.76 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually (one rotor per part number)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDBA part number:\u003c\/strong\u003e DBA53942BLKS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listed by DBA:\u003c\/strong\u003e 17-23 Tesla Model 3 (w\/355mm Front Rotor) Front 5000 Series 2-Piece Slotted Rotor w\/Black Hat\u003c\/li\u003e\n\u003cli\u003eBrake packages and rotor sizes vary within a model line, so compare this rotor's 355 mm diameter with your current rotor before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout the DBA 5000 Series\u003c\/h3\u003e\u003cp\u003eThe 5000 Series is DBA's two-piece composite rotor: a high-carbon cast-iron ring bolted to an aerospace-grade T6061-T6 aluminum hat with NAS bolts and crimp nuts. The aluminum hat lowers unsprung weight and passes less heat into the hub, while the iron ring expands evenly. DBA recommends it for high-performance street cars, track days, club racing and rally. Vented versions use DBA's Kangaroo Paw vane layout (144 diamond and teardrop-shaped pillars), which DBA says adds surface area and cooling efficiency compared with a straight-vane design.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eDBA rotors are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"DBA","offers":[{"title":"Default Title","offer_id":52936689516842,"sku":"dbaDBA53942BLKS","price":532.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/04157a9fa77eff5a88724b9bfb34ff2bL.jpg?v=1791955503"},{"product_id":"dba43127-tesla-model-s-4000-series-hd-plain-rear-brake-rotor","title":"DBA Tesla Model S 4000 Series HD Plain Rear Brake Rotor (DBA43127)","description":"\u003cp\u003eThe DBA 4000 Series HD Plain rear rotor for the Tesla Model S is built by Disc Brakes Australia (DBA), a specialist rotor maker with more than 45 years in the business. This one has the HD finish, a smooth OE-style face for drivers who want 4000 Series strength without a drilled or slotted look (it also suits race classes that require an OE-style rotor). DBA rotors are sold individually, so order two for a full axle set.\u003c\/p\u003e\u003ch3\u003eRotor details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one-piece vented rotor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e DBA 4000 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace:\u003c\/strong\u003e plain (smooth)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter diameter:\u003c\/strong\u003e 365 mm (14.37 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 28 mm (1.10 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall height:\u003c\/strong\u003e 60 mm (2.36 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter bore:\u003c\/strong\u003e 70.1 mm (2.76 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually (one rotor per part number)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDBA part number:\u003c\/strong\u003e DBA43127\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listed by DBA:\u003c\/strong\u003e 17-20 Tesla S Rear 4000 Series Standard Rotor\u003c\/li\u003e\n\u003cli\u003eBrake packages and rotor sizes vary within a model line, so compare this rotor's 365 mm diameter with your current rotor before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout the DBA 4000 Series\u003c\/h3\u003e\u003cp\u003eThe 4000 Series is DBA's one-piece performance upgrade. It is cast from XG-150 high-carbon alloyed iron and put through Thermal Stability Profiling (TSP), so the rotor copes with repeated heat cycles in hard braking. Vented versions use DBA's Kangaroo Paw vane layout (144 diamond and teardrop-shaped pillars), which DBA says adds surface area and cooling efficiency compared with a straight-vane design.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eDBA rotors are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"DBA","offers":[{"title":"Default Title","offer_id":52936690696490,"sku":"dbaDBA43127","price":196.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/ee80bf109478ad19166b93f03af8ac86.jpg?v=1791955539"},{"product_id":"dba53943blks-tesla-model-3-5000-series-t3-slotted-2-piece-rear-brake-rotor","title":"DBA Tesla Model 3 5000 Series T3 Slotted 2-Piece Rear Brake Rotor, Black Hat (DBA53943BLKS)","description":"\u003cp\u003eThe DBA 5000 Series T3 Slotted 2-Piece rear rotor for the Tesla Model 3 is built by Disc Brakes Australia (DBA), a specialist rotor maker with more than 45 years in the business. This one has DBA's T3 slot pattern: precision CNC-machined slots, with more exit points for pad dust and gas than the T2, for a quieter, more consistent pedal. The hat is finished in black. DBA rotors are sold individually, so order two for a full axle set.\u003c\/p\u003e\u003ch3\u003eRotor details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e two-piece, cast-iron ring with aluminum hat, vented\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e DBA 5000 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace:\u003c\/strong\u003e slotted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHat finish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter diameter:\u003c\/strong\u003e 335 mm (13.19 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 20 mm (0.79 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall height:\u003c\/strong\u003e 46.5 mm (1.83 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter bore:\u003c\/strong\u003e 70 mm (2.76 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually (one rotor per part number)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDBA part number:\u003c\/strong\u003e DBA53943BLKS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listed by DBA:\u003c\/strong\u003e 17-23 Tesla Model 3 Rear 5000 Series 2-Piece Slotted Rotor w\/Black Hat\u003c\/li\u003e\n\u003cli\u003eBrake packages and rotor sizes vary within a model line, so compare this rotor's 335 mm diameter with your current rotor before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout the DBA 5000 Series\u003c\/h3\u003e\u003cp\u003eThe 5000 Series is DBA's two-piece composite rotor: a high-carbon cast-iron ring bolted to an aerospace-grade T6061-T6 aluminum hat with NAS bolts and crimp nuts. The aluminum hat lowers unsprung weight and passes less heat into the hub, while the iron ring expands evenly. DBA recommends it for high-performance street cars, track days, club racing and rally. Vented versions use DBA's Kangaroo Paw vane layout (144 diamond and teardrop-shaped pillars), which DBA says adds surface area and cooling efficiency compared with a straight-vane design.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eDBA rotors are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"DBA","offers":[{"title":"Default Title","offer_id":52936690991402,"sku":"dbaDBA53943BLKS","price":520.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/76d42bc938aa121b492e19f81055467bL.jpg?v=1791955554"},{"product_id":"dba43127s-tesla-model-s-4000-series-t3-slotted-rear-brake-rotor","title":"DBA Tesla Model S 4000 Series T3 Slotted Rear Brake Rotor (DBA43127S)","description":"\u003cp\u003eThe DBA 4000 Series T3 Slotted rear rotor for the Tesla Model S is built by Disc Brakes Australia (DBA), a specialist rotor maker with more than 45 years in the business. This one has DBA's T3 slot pattern: precision CNC-machined slots, with more exit points for pad dust and gas than the T2, for a quieter, more consistent pedal. DBA rotors are sold individually, so order two for a full axle set.\u003c\/p\u003e\u003ch3\u003eRotor details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one-piece vented rotor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e DBA 4000 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace:\u003c\/strong\u003e slotted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter diameter:\u003c\/strong\u003e 365 mm (14.37 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 28 mm (1.10 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall height:\u003c\/strong\u003e 60 mm (2.36 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter bore:\u003c\/strong\u003e 70 mm (2.76 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually (one rotor per part number)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDBA part number:\u003c\/strong\u003e DBA43127S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listed by DBA:\u003c\/strong\u003e 16-21 Tesla S (w\/Brembo Rear Caliper 4 Piston) Rear 4000 Series Slotted Rotor\u003c\/li\u003e\n\u003cli\u003eBrake packages and rotor sizes vary within a model line, so compare this rotor's 365 mm diameter with your current rotor before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout the DBA 4000 Series\u003c\/h3\u003e\u003cp\u003eThe 4000 Series is DBA's one-piece performance upgrade. It is cast from XG-150 high-carbon alloyed iron and put through Thermal Stability Profiling (TSP), so the rotor copes with repeated heat cycles in hard braking. Vented versions use DBA's Kangaroo Paw vane layout (144 diamond and teardrop-shaped pillars), which DBA says adds surface area and cooling efficiency compared with a straight-vane design.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eDBA rotors are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"DBA","offers":[{"title":"Default Title","offer_id":52936691646762,"sku":"dbaDBA43127S","price":244.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/50f40c6eb8b029af4d0fdc72ade6fb84.jpg?v=1791955587"},{"product_id":"ebcdp81110rp1-tesla-model-3-rp-1-race-front-brake-pads","title":"EBC Tesla Model 3 RP-1 Race Front Brake Pads, RWD (DP81110RP1)","description":"\u003cp\u003eThe EBC RP-1 Race front brake pad set for the Tesla Model 3, RWD is made by EBC Brakes and is intended for track use only. Pads are sold as a set for one axle, so this part number covers the front axle only.\u003c\/p\u003e\u003ch3\u003ePad details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompound:\u003c\/strong\u003e EBC RP-1 (carbon Kevlar race blend)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntended use:\u003c\/strong\u003e track use only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e as a set for one axle (one part number per axle)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3 — RWD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEBC part number:\u003c\/strong\u003e DP81110RP1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listed by EBC:\u003c\/strong\u003e 2017+ Tesla Model 3 (RWD) RP-1 Front Brake Pads\u003c\/li\u003e\n\u003cli\u003eBrake packages vary within a model line, so compare your current pads and caliper with the application above before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout EBC RP-1\u003c\/h3\u003e\u003cp\u003eRP-1 is EBC's race pad, made in EBC's Bristol, UK facility from a carbon Kevlar blend. The pad is marked for track use only, so it is not meant for the street.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEBC pads are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We fit brake pads and bleed the system in house, \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e, and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":52939373084970,"sku":"ebcDP81110RP1","price":280.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/9a02f59f626be9c34a0d1d24b4e106dfL_263a8029-7b09-46d1-a8f5-d6feb4e76afa.jpg?v=1791987099"},{"product_id":"kw10287006-v1-coilover-kit-for-tesla-model-3-model-y","title":"KW V1 Coilover Kit for Tesla Model 3\/Model Y (10287006)","description":"\u003cp\u003eThe KW V1 Coilover Kit for the Tesla Model 3\/Model Y is KW's entry-level street coilover, with stainless-steel INOX-LINE struts, corrosion-resistant springs and a damper setup that KW tunes for each vehicle. Ride height is adjustable. Part 10287006.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e V1 Coilover Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless-steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e INOX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver, Yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e one KW part number; contents follow KW's listing for this application\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3\/Model Y\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2017-2026 Tesla 3 (Base --.-cc, Long Range --.-cc, Premium --.-cc, Standard Plus --.-cc); 2020-2026 Tesla Y (Base --.-cc, Long Range --.-cc, Premium --.-cc, Standard Range --.-cc)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKW part number:\u003c\/strong\u003e 10287006\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e Tesla Model 3\/Model Y V1 Coilover Kit\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout KW V1\u003c\/h3\u003e\u003cp\u003eV1 uses a preset damper setup matched by KW to vehicle-specific spring rates, so there is nothing to dial in. It is the simplest way to get a lower, more controlled stance on KW's stainless-steel INOX-LINE hardware.\u003c\/p\u003e\u003cp\u003eKW builds its coilovers by hand at its headquarters in Fichtenberg, Germany. Each one carries an individual serial number, and KW says every damper is dyno tested before it ships. KW develops vehicle-specific damper and spring setups on the Nürburgring Nordschleife and in its own 7-post test center.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eKW kits are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"KW","offers":[{"title":"Default Title","offer_id":52940477628714,"sku":"kw10287006","price":1509.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/30bc6914bb04fdb58d320bdc80f58dfcL.jpg?v=1792002230"},{"product_id":"kw3520887006-v3-leveling-coilover-kit-for-tesla-model-3-rwd","title":"KW V3 Leveling Coilover Kit for Tesla Model 3 RWD (3520887006)","description":"\u003cp\u003eThe KW V3 Leveling Coilover Kit for the Tesla Model 3 RWD is a coilover with separately adjustable rebound and compression damping and stainless-steel INOX-LINE struts, aimed at performance drivers who want to tune the setup to the car and tires. Part 3520887006.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e V3 Leveling Coilover Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless-steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e INOX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver, Yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e one KW part number; contents follow KW's listing for this application\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3 RWD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2017-2026 Tesla 3 (Base, Base --.-cc, Long Range --.-cc, Premium --.-cc, Standard Plus --.-cc); 2020-2026 Tesla Y (Base --.-cc, Long Range --.-cc, Premium --.-cc, Standard Range --.-cc)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKW part number:\u003c\/strong\u003e 3520887006\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e V3 Leveling Coilover Tesla Model 3 RWD\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout KW V3\u003c\/h3\u003e\u003cp\u003eV3 combines KW's TVR-A rebound and TVC-A compression valves, so rebound and compression are adjusted separately. That lets you add compression damping for more grip without changing the rebound setting that is matched to the spring rate.\u003c\/p\u003e\u003cp\u003eThis is the KW Leveling version for this application. Ask us how it differs from the standard kit for your car.\u003c\/p\u003e\u003cp\u003eKW builds its coilovers by hand at its headquarters in Fichtenberg, Germany. Each one carries an individual serial number, and KW says every damper is dyno tested before it ships. KW develops vehicle-specific damper and spring setups on the Nürburgring Nordschleife and in its own 7-post test center.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eKW kits are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"KW","offers":[{"title":"Default Title","offer_id":52940477759786,"sku":"kw3520887006","price":3474.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/43e6f4aa4e651c29206bbfb5fd326fc0_20982116-5a6f-452f-b385-1f82ccc21419.png?v=1792002230"},{"product_id":"kw3520887007-v3-leveling-coilover-kit-for-tesla-model-3-awd","title":"KW V3 Leveling Coilover Kit for Tesla Model 3 AWD (3520887007)","description":"\u003cp\u003eThe KW V3 Leveling Coilover Kit for the Tesla Model 3 AWD is a coilover with separately adjustable rebound and compression damping and stainless-steel INOX-LINE struts, aimed at performance drivers who want to tune the setup to the car and tires. Part 3520887007.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e V3 Leveling Coilover Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e INOX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver, Yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e one KW part number; contents follow KW's listing for this application\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3 AWD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2018-2023 Tesla 3 (Long Range, Long Range --.-cc, Performance, Performance --.-cc)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKW part number:\u003c\/strong\u003e 3520887007\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e V3 Leveling Coilover Tesla Model 3 AWD\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout KW V3\u003c\/h3\u003e\u003cp\u003eV3 combines KW's TVR-A rebound and TVC-A compression valves, so rebound and compression are adjusted separately. That lets you add compression damping for more grip without changing the rebound setting that is matched to the spring rate.\u003c\/p\u003e\u003cp\u003eThis is the KW Leveling version for this application. Ask us how it differs from the standard kit for your car.\u003c\/p\u003e\u003cp\u003eKW builds its coilovers by hand at its headquarters in Fichtenberg, Germany. Each one carries an individual serial number, and KW says every damper is dyno tested before it ships. KW develops vehicle-specific damper and spring setups on the Nürburgring Nordschleife and in its own 7-post test center.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eKW kits are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"KW","offers":[{"title":"Default Title","offer_id":52940477858090,"sku":"kw3520887007","price":3494.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/d702219b8ecdae1c60075b759d2af808_8d5bbafc-0167-4e7b-be22-ec112370b481.png?v=1792002230"},{"product_id":"kw35287006-v3-coilover-kit-for-tesla-model-3-2wd","title":"KW V3 Coilover Kit for Tesla Model 3 2WD (35287006)","description":"\u003cp\u003eThe KW V3 Coilover Kit for the Tesla Model 3 2WD is a coilover with separately adjustable rebound and compression damping and stainless-steel INOX-LINE struts, aimed at performance drivers who want to tune the setup to the car and tires. Part 35287006.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e V3 Coilover Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless-steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e INOX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver, Yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e one KW part number; contents follow KW's listing for this application\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3 2WD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2017-2026 Tesla 3 (Base, Base --.-cc, Long Range --.-cc, Premium --.-cc, Standard Plus --.-cc); 2020-2026 Tesla Y (Base --.-cc, Long Range --.-cc, Premium --.-cc, Standard Range --.-cc)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKW part number:\u003c\/strong\u003e 35287006\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e Coilover Kit V3 2017+ Tesla Model 3 2WD\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout KW V3\u003c\/h3\u003e\u003cp\u003eV3 combines KW's TVR-A rebound and TVC-A compression valves, so rebound and compression are adjusted separately. That lets you add compression damping for more grip without changing the rebound setting that is matched to the spring rate.\u003c\/p\u003e\u003cp\u003eKW builds its coilovers by hand at its headquarters in Fichtenberg, Germany. Each one carries an individual serial number, and KW says every damper is dyno tested before it ships. KW develops vehicle-specific damper and spring setups on the Nürburgring Nordschleife and in its own 7-post test center.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eKW kits are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"KW","offers":[{"title":"Default Title","offer_id":52940478087466,"sku":"kw35287006","price":3474.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/81da560dcb0c74fae3cb14722dd5d11a_d4dae139-dcbb-4e85-871a-bf6d55981755.jpg?v=1792002231"},{"product_id":"kw35287007-v3-coilover-kit-for-tesla-model-3-awd","title":"KW V3 Coilover Kit for Tesla Model 3 AWD (35287007)","description":"\u003cp\u003eThe KW V3 Coilover Kit for the Tesla Model 3 AWD is a coilover with separately adjustable rebound and compression damping and stainless-steel INOX-LINE struts, aimed at performance drivers who want to tune the setup to the car and tires. Part 35287007.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e V3 Coilover Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless-steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e INOX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver, Yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e one KW part number; contents follow KW's listing for this application\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3 AWD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2018-2023 Tesla 3 (Long Range, Long Range --.-cc, Performance, Performance --.-cc)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKW part number:\u003c\/strong\u003e 35287007\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e Coilover Kit V3 18-19 Tesla Model 3 AWD\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout KW V3\u003c\/h3\u003e\u003cp\u003eV3 combines KW's TVR-A rebound and TVC-A compression valves, so rebound and compression are adjusted separately. That lets you add compression damping for more grip without changing the rebound setting that is matched to the spring rate.\u003c\/p\u003e\u003cp\u003eKW builds its coilovers by hand at its headquarters in Fichtenberg, Germany. Each one carries an individual serial number, and KW says every damper is dyno tested before it ships. KW develops vehicle-specific damper and spring setups on the Nürburgring Nordschleife and in its own 7-post test center.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eKW kits are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"KW","offers":[{"title":"Default Title","offer_id":52940481102122,"sku":"kw35287007","price":3494.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/6c2c33286a033454d530c19c33b85392.jpg?v=1792002281"},{"product_id":"kw39087003-ddc-plug-play-coilover-kit-for-tesla-model-3-perf-model-y-perf","title":"KW DDC Plug \u0026 Play Coilover Kit for Tesla Model 3 Perf. \/ Model Y Perf. (39087003)","description":"\u003cp\u003eThe KW DDC Plug \u0026amp; Play Coilover Kit for the Tesla Model 3 Perf. \/ Model Y Perf. is a DDC (Dynamic Damping Control) coilover for cars with electronically adjustable dampers. You get adjustable ride height and KW damper tuning while keeping electronic damping control. Part 39087003.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e DDC Plug \u0026amp; Play Coilover Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e one KW part number; contents follow KW's listing for this application\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3 Perf. \/ Model Y Perf.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2018-2026 Tesla 3 (Long Range --.-cc, Performance --.-cc, Premium --.-cc); 2020-2026 Tesla Y (Long Range --.-cc, Performance --.-cc, Premium --.-cc)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKW part number:\u003c\/strong\u003e 39087003\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e 18-26 Tesla Model 3 Perf. \/ 20-26 Model Y Perf. DDC Plug And Play Coilover Kit\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout KW DDC\u003c\/h3\u003e\u003cp\u003eKW DDC coilovers have electronically adjustable dampers, so the factory adaptive-damping features stay usable while KW's stainless-steel INOX-LINE struts handle the lowering and ride-height adjustment.\u003c\/p\u003e\u003cp\u003eDDC Plug \u0026amp; Play version: the factory electronic struts are replaced by KW struts that connect to the car's original plugs and controls, so the factory Comfort, Normal and Sport buttons keep working.\u003c\/p\u003e\u003cp\u003eKW builds its coilovers by hand at its headquarters in Fichtenberg, Germany. Each one carries an individual serial number, and KW says every damper is dyno tested before it ships. KW develops vehicle-specific damper and spring setups on the Nürburgring Nordschleife and in its own 7-post test center.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eKW kits are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"KW","offers":[{"title":"Default Title","offer_id":52940481167658,"sku":"kw39087003","price":5590.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/73f9a7fed56be9f77e3ce5d280f2d8e3L_c3c6f534-ecf6-4918-b05d-42beeda517ff.jpg?v=1792002281"},{"product_id":"kw39087001-ddc-ecu-coilover-kit-for-tesla-model-s-p90d-awd","title":"KW DDC ECU Coilover Kit for Tesla Model S P90D AWD (39087001)","description":"\u003cp\u003eThe KW DDC ECU Coilover Kit for the Tesla Model S P90D AWD is a DDC (Dynamic Damping Control) coilover for cars with electronically adjustable dampers. You get adjustable ride height and KW damper tuning while keeping electronic damping control. Part 39087001.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e DDC ECU Coilover Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless-steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e INOX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver, Yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKW add-on part listed for this application:\u003c\/strong\u003e 68510276. Ask us what it is for before you order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e one KW part number; contents follow KW's listing for this application\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model S P90D AWD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2014-2023 Tesla S (100D --.-cc, 60D --.-cc, 70D --.-cc, 75D --.-cc, 85D --.-cc, 90D --.-cc)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKW part number:\u003c\/strong\u003e 39087001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e Tesla Model S P90D AWD DDC ECU Coilover Kit\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout KW DDC\u003c\/h3\u003e\u003cp\u003eKW DDC coilovers have electronically adjustable dampers, so the factory adaptive-damping features stay usable while KW's stainless-steel INOX-LINE struts handle the lowering and ride-height adjustment.\u003c\/p\u003e\u003cp\u003eDDC ECU version: the kit adds an electronic control unit with a vehicle-specific cable set and a DDC control button, with three vehicle-specific damper modes (Comfort, Sport and Sport+). KW also offers an optional DDC WLAN module for app control; it is not part of this listing.\u003c\/p\u003e\u003cp\u003eKW builds its coilovers by hand at its headquarters in Fichtenberg, Germany. Each one carries an individual serial number, and KW says every damper is dyno tested before it ships. KW develops vehicle-specific damper and spring setups on the Nürburgring Nordschleife and in its own 7-post test center.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eKW kits are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"KW","offers":[{"title":"Default Title","offer_id":52940481233194,"sku":"kw39087001","price":5994.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/d25d483d933dc139000e5808a7f6c3b1_05629f78-1d68-41b4-b80f-d453aa8cba51.png?v=1792002282"},{"product_id":"eibe40-87-001-01-11-front-rear-anti-roll-bar-kit-for-2017-2020-tesla-model-3-awd-rwd","title":"Eibach Front \u0026 Rear Anti-Roll Bar Kit for 2017–2020 Tesla Model 3 AWD\/RWD (E40-87-001-01-11)","description":"\u003cp\u003eThe Eibach Front \u0026amp; Rear Anti-Roll Bar Kit for the Tesla Model 3 AWD\/RWD is a front and rear sway bar (anti-roll bar) upgrade. A stiffer bar resists body roll in corners. Bushings are included. Part E40-87-001-01-11.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Anti-Roll-Kit (sway bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Powder Coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar color:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushings included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3 AWD\/RWD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2017-2022 Tesla 3 Long Range; 2022 Tesla 3 Performance; 2018-2023 Tesla 3 Performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEibach part number:\u003c\/strong\u003e E40-87-001-01-11\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e Front \u0026amp; Rear Sway Bar Set 17-20 Tesla Model 3 AWD\/RWD\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Eibach Anti-Roll-Kit\u003c\/h3\u003e\u003cp\u003eAnti-Roll-Kit is Eibach's sway bar (anti-roll bar) line. A stiffer bar resists body roll in corners, and bars listed as adjustable let you change how stiff the bar acts.\u003c\/p\u003e\u003cp\u003eEibach was founded in 1951 by Heinrich Eibach and is headquartered in Finnentrop, Germany. Its U.S. subsidiary, Eibach Springs, Inc., was founded in 1987.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEibach parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. We can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52944402546986,"sku":"eibE40-87-001-01-11","price":568.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/906a5619499b09e4dc9c7882a0b53575L.jpg?v=1792032436"},{"product_id":"eibe10-87-001-02-22-pro-kit-lowering-springs-for-2017-2019-tesla-model-3-long-range-awd","title":"Eibach Pro-Kit Lowering Springs for 2017–2019 Tesla Model 3 Long Range AWD (E10-87-001-02-22)","description":"\u003cp\u003eThe Eibach Pro-Kit lowering springs for the Tesla Model 3 Long Range AWD are Eibach's street-oriented spring set for a lower stance and sharper handling. Part E10-87-001-02-22.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Pro-Kit Lowering Springs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring material:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring ends:\u003c\/strong\u003e OEM-style at both ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3 Long Range AWD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2017-2023 Tesla 3 Long Range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEibach part number:\u003c\/strong\u003e E10-87-001-02-22\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e Pro-Kit for 17-19 Tesla 3 Long Range (AWD)\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Eibach Pro-Kit\u003c\/h3\u003e\u003cp\u003ePro-Kit is Eibach's street-oriented lowering spring line. Eibach positions it as a way to lower the car and sharpen handling while keeping ride quality close to stock.\u003c\/p\u003e\u003cp\u003eEibach was founded in 1951 by Heinrich Eibach and is headquartered in Finnentrop, Germany. Its U.S. subsidiary, Eibach Springs, Inc., was founded in 1987.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEibach parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52944402612522,"sku":"eibE10-87-001-02-22","price":395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/6d58d544cdd8fda0925b8b2b3b08e057L.jpg?v=1792032243"},{"product_id":"eibak41-87-001-01-20-front-anti-roll-end-link-kit-for-2017-2020-tesla-model-3","title":"Eibach Front Anti-Roll End Link Kit for 2017–2020 Tesla Model 3 (AK41-87-001-01-20)","description":"\u003cp\u003eThese Eibach front anti-roll end links for the Tesla Model 3 connect the sway bar to the suspension. Part AK41-87-001-01-20.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Anti-Roll End Link Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e Pair of end links (quantity 2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing material:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2018-2019 Tesla 3 Base; 2022 Tesla 3 Base; 2017-2022 Tesla 3 Long Range; 2022 Tesla 3 Performance; 2018-2022 Tesla 3 Performance; 2020-2021 Tesla 3 Standard Plus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEibach part number:\u003c\/strong\u003e AK41-87-001-01-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e Front Anti-Roll End Link Kit 17-20 Tesla Model 3\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Eibach Anti-Roll-Kit\u003c\/h3\u003e\u003cp\u003eAnti-Roll end links and braces are part of Eibach's Anti-Roll-Kit range. End links connect the sway bar to the suspension, and adjustable ones can be set to the right length after a ride-height change.\u003c\/p\u003e\u003cp\u003eEibach was founded in 1951 by Heinrich Eibach and is headquartered in Finnentrop, Germany. Its U.S. subsidiary, Eibach Springs, Inc., was founded in 1987.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEibach parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. We can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52944402907434,"sku":"eibAK41-87-001-01-20","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/b3919fddd7810e2ba59f249007e665aaL.jpg?v=1792032437"},{"product_id":"eibak41-87-001-01-02-rear-anti-roll-end-link-kit-for-2017-2020-tesla-model-3","title":"Eibach Rear Anti-Roll End Link Kit for 2017–2020 Tesla Model 3 (AK41-87-001-01-02)","description":"\u003cp\u003eThese Eibach rear anti-roll end links for the Tesla Model 3 connect the sway bar to the suspension. Part AK41-87-001-01-02.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Anti-Roll End Link Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e Pair of end links (quantity 2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing material:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2018-2019 Tesla 3 Base; 2017-2022 Tesla 3 Long Range; 2022 Tesla 3 Performance; 2018-2022 Tesla 3 Performance; 2020-2021 Tesla 3 Standard Plus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEibach part number:\u003c\/strong\u003e AK41-87-001-01-02\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e Rear Anti-Roll End Link Kit 17-20 Tesla Model 3\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Eibach Anti-Roll-Kit\u003c\/h3\u003e\u003cp\u003eAnti-Roll end links and braces are part of Eibach's Anti-Roll-Kit range. End links connect the sway bar to the suspension, and adjustable ones can be set to the right length after a ride-height change.\u003c\/p\u003e\u003cp\u003eEibach was founded in 1951 by Heinrich Eibach and is headquartered in Finnentrop, Germany. Its U.S. subsidiary, Eibach Springs, Inc., was founded in 1987.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEibach parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. We can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52944403169578,"sku":"eibAK41-87-001-01-02","price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/23f3fd8f8b0bfdd3ffb11f485c507f4fL.jpg?v=1792032492"},{"product_id":"eibe43-87-001-01-22-pro-plus-kit-springs-sway-bars-for-2017-2020-tesla-model-3-long-range-rwd","title":"Eibach Pro-Plus Kit (Springs + Sway Bars) for 2017–2020 Tesla Model 3 Long Range RWD (E43-87-001-01-22)","description":"\u003cp\u003eThe Eibach Pro-Plus Kit for the Tesla Model 3 Long Range RWD puts Eibach Pro-Kit lowering springs and Eibach sway bars in one kit. Part E43-87-001-01-22.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Pro-Plus Kit (Springs + Sway Bars)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e Eibach Pro-Kit springs and Eibach sway bars\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring material:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSway bar color:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushing color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3 Long Range RWD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2017-2019 Tesla 3 Long Range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEibach part number:\u003c\/strong\u003e E43-87-001-01-22\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e Pro-Plus Kit for 17-20 Tesla 3 Long Range (RWD)\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Eibach Pro-Plus\u003c\/h3\u003e\u003cp\u003ePro-Plus pairs Pro-Kit lowering springs with Eibach Anti-Roll sway bars, so you can lower the car and add roll control from one part number.\u003c\/p\u003e\u003cp\u003eEibach was founded in 1951 by Heinrich Eibach and is headquartered in Finnentrop, Germany. Its U.S. subsidiary, Eibach Springs, Inc., was founded in 1987.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEibach parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52944403235114,"sku":"eibE43-87-001-01-22","price":963.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/137489f93c83d022f082fa18ca5fc57dL_eab8f563-71ac-430f-9cf5-ef647bb457c1.jpg?v=1792032493"},{"product_id":"eibe43-87-001-03-22-pro-plus-kit-springs-sway-bars-for-2018-2020-tesla-model-3-performance","title":"Eibach Pro-Plus Kit (Springs + Sway Bars) for 2018–2020 Tesla Model 3 Performance (E43-87-001-03-22)","description":"\u003cp\u003eThe Eibach Pro-Plus Kit for the Tesla Model 3 Performance puts Eibach Pro-Kit lowering springs and Eibach sway bars in one kit. Part E43-87-001-03-22.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Pro-Plus Kit (Springs + Sway Bars)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e Eibach Pro-Kit springs and Eibach sway bars\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring material:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSway bar color:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushing color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3 Performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2022 Tesla 3 Performance; 2018-2023 Tesla 3 Performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEibach part number:\u003c\/strong\u003e E43-87-001-03-22\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e Pro-Plus Kit for 18-20 Tesla 3 Performance\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Eibach Pro-Plus\u003c\/h3\u003e\u003cp\u003ePro-Plus pairs Pro-Kit lowering springs with Eibach Anti-Roll sway bars, so you can lower the car and add roll control from one part number.\u003c\/p\u003e\u003cp\u003eEibach was founded in 1951 by Heinrich Eibach and is headquartered in Finnentrop, Germany. Its U.S. subsidiary, Eibach Springs, Inc., was founded in 1987.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEibach parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52944414245162,"sku":"eibE43-87-001-03-22","price":963.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/137489f93c83d022f082fa18ca5fc57dL_3a3e7e00-4ae9-4ad6-9508-d7b1e989ccc1.jpg?v=1792032493"},{"product_id":"eibe43-87-001-02-22-pro-plus-kit-springs-sway-bars-for-2017-2020-tesla-model-3-long-range-awd","title":"Eibach Pro-Plus Kit (Springs + Sway Bars) for 2017–2020 Tesla Model 3 Long Range AWD (E43-87-001-02-22)","description":"\u003cp\u003eThe Eibach Pro-Plus Kit for the Tesla Model 3 Long Range AWD puts Eibach Pro-Kit lowering springs and Eibach sway bars in one kit. Part E43-87-001-02-22.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Pro-Plus Kit (Springs + Sway Bars)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e Eibach Pro-Kit springs and Eibach sway bars\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring material:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSway bar color:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushing color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3 Long Range AWD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2017-2023 Tesla 3 Long Range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEibach part number:\u003c\/strong\u003e E43-87-001-02-22\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e Pro-Plus Kit for 17-20 Tesla 3 Long Range AWD\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Eibach Pro-Plus\u003c\/h3\u003e\u003cp\u003ePro-Plus pairs Pro-Kit lowering springs with Eibach Anti-Roll sway bars, so you can lower the car and add roll control from one part number.\u003c\/p\u003e\u003cp\u003eEibach was founded in 1951 by Heinrich Eibach and is headquartered in Finnentrop, Germany. Its U.S. subsidiary, Eibach Springs, Inc., was founded in 1987.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEibach parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52944414572842,"sku":"eibE43-87-001-02-22","price":963.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/137489f93c83d022f082fa18ca5fc57dL_f33f1bab-86d0-4652-a3e9-52a44849f71d.jpg?v=1792032494"},{"product_id":"eibe10-87-001-10-22-pro-kit-lowering-springs-for-2022-2023-tesla-model-3-lfp-battery-cars-only","title":"Eibach Pro-Kit Lowering Springs for 2022–2023 Tesla Model 3 (LFP-battery cars only) (E10-87-001-10-22)","description":"\u003cp\u003eThe Eibach Pro-Kit lowering springs for the Tesla Model 3 (LFP-battery cars only) are Eibach's street-oriented spring set for a lower stance and sharper handling. Part E10-87-001-10-22.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Pro-Kit Lowering Springs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring material:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring ends:\u003c\/strong\u003e OEM-style at both ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3 (LFP-battery cars only)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2022-2024 Tesla 3 Base; 2022-2024 Tesla 3 Long Range; 2022-2024 Tesla 3 Performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEibach part number:\u003c\/strong\u003e E10-87-001-10-22\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e 22-23 Tesla Model 3 LFP Pro-Kit EV (For LFP Batteries Only Tested W\/ Factory Dampers)\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Eibach Pro-Kit\u003c\/h3\u003e\u003cp\u003ePro-Kit is Eibach's street-oriented lowering spring line. Eibach positions it as a way to lower the car and sharpen handling while keeping ride quality close to stock.\u003c\/p\u003e\u003cp\u003eEibach was founded in 1951 by Heinrich Eibach and is headquartered in Finnentrop, Germany. Its U.S. subsidiary, Eibach Springs, Inc., was founded in 1987.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEibach parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52944424698154,"sku":"eibE10-87-001-10-22","price":395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/e8633886b10eb2756517a36fe7c07bacL.jpg?v=1792032555"},{"product_id":"eibe40-87-001-01-01-22mm-rear-anti-roll-bar-kit-for-2017-2020-tesla-model-3-awd-rwd","title":"Eibach 22mm Rear Anti-Roll Bar Kit for 2017–2020 Tesla Model 3 AWD\/RWD (E40-87-001-01-01)","description":"\u003cp\u003eThe Eibach 22mm Rear Anti-Roll Bar Kit for the Tesla Model 3 AWD\/RWD is a rear sway bar (anti-roll bar) upgrade. A stiffer bar resists body roll in corners. Bushings are included. Part E40-87-001-01-01.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Anti-Roll-Kit (sway bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar size:\u003c\/strong\u003e 22 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Powder Coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar color:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushings included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3 AWD\/RWD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2017-2023 Tesla 3 Long Range; 2022 Tesla 3 Performance; 2018-2023 Tesla 3 Performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEibach part number:\u003c\/strong\u003e E40-87-001-01-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e 22mm Rear Anti-Roll Bar Kit for 17-20 Tesla Model 3 AWD\/RWD\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Eibach Anti-Roll-Kit\u003c\/h3\u003e\u003cp\u003eAnti-Roll-Kit is Eibach's sway bar (anti-roll bar) line. A stiffer bar resists body roll in corners, and bars listed as adjustable let you change how stiff the bar acts.\u003c\/p\u003e\u003cp\u003eEibach was founded in 1951 by Heinrich Eibach and is headquartered in Finnentrop, Germany. Its U.S. subsidiary, Eibach Springs, Inc., was founded in 1987.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEibach parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. We can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52944440164650,"sku":"eibE40-87-001-01-01","price":269.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/2457f7fd807c3dceaf1702388d7ace85L.jpg?v=1792032376"},{"product_id":"eibe10-87-003-01-22-pro-kit-lowering-springs-for-2024-2025-tesla-model-3-performance-awd","title":"Eibach Pro-Kit Lowering Springs for 2024–2025 Tesla Model 3 Performance AWD (E10-87-003-01-22)","description":"\u003cp\u003eThe Eibach Pro-Kit lowering springs for the Tesla Model 3 Performance AWD are Eibach's street-oriented spring set for a lower stance and sharper handling. Part E10-87-003-01-22.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Pro-Kit Lowering Springs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring material:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3 Performance AWD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2024-2025 Tesla 3 Long Range; 2024-2026 Tesla 3 Performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEibach part number:\u003c\/strong\u003e E10-87-003-01-22\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e Pro-Kit EV for 24-25 Tesla Model 3 Performance AWD\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Eibach Pro-Kit\u003c\/h3\u003e\u003cp\u003ePro-Kit is Eibach's street-oriented lowering spring line. Eibach positions it as a way to lower the car and sharpen handling while keeping ride quality close to stock.\u003c\/p\u003e\u003cp\u003eEibach was founded in 1951 by Heinrich Eibach and is headquartered in Finnentrop, Germany. Its U.S. subsidiary, Eibach Springs, Inc., was founded in 1987.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEibach parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52944441082154,"sku":"eibE10-87-003-01-22","price":395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/e8633886b10eb2756517a36fe7c07bacL_7434aaf3-fd6c-4ba8-9cf4-fc51f779df30.jpg?v=1792032556"},{"product_id":"eibe40-87-001-01-10-32mm-front-anti-roll-bar-kit-for-2017-2020-tesla-model-3-awd-rwd","title":"Eibach 32mm Front Anti-Roll Bar Kit for 2017–2020 Tesla Model 3 AWD\/RWD (E40-87-001-01-10)","description":"\u003cp\u003eThe Eibach 32mm Front Anti-Roll Bar Kit for the Tesla Model 3 AWD\/RWD is a front sway bar (anti-roll bar) upgrade. A stiffer bar resists body roll in corners. Bushings are included. Part E40-87-001-01-10.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Anti-Roll-Kit (sway bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar size:\u003c\/strong\u003e 32 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Powder Coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar color:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushings included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3 AWD\/RWD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2018-2019 Tesla 3 Base; 2022 Tesla 3 Base; 2017-2018 Tesla 3 Long Range; 2020-2022 Tesla 3 Long Range; 2022 Tesla 3 Performance; 2018 Tesla 3 Performance; 2020-2023 Tesla 3 Performance; 2020-2021 Tesla 3 Standard Plus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEibach part number:\u003c\/strong\u003e E40-87-001-01-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e 32mm Front Sway Bar Kit for 17-20 Tesla Model 3 AWD\/RWD\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Eibach Anti-Roll-Kit\u003c\/h3\u003e\u003cp\u003eAnti-Roll-Kit is Eibach's sway bar (anti-roll bar) line. A stiffer bar resists body roll in corners, and bars listed as adjustable let you change how stiff the bar acts.\u003c\/p\u003e\u003cp\u003eEibach was founded in 1951 by Heinrich Eibach and is headquartered in Finnentrop, Germany. Its U.S. subsidiary, Eibach Springs, Inc., was founded in 1987.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEibach parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. We can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52944443605290,"sku":"eibE40-87-001-01-10","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/1cbd8f4b968a65d1ccff704bec6f062aL.jpg?v=1792032377"},{"product_id":"eibe10-87-001-05-22-pro-kit-lowering-springs-for-2018-2020-tesla-model-3-awd-performance","title":"Eibach Pro-Kit Lowering Springs for 2018–2020 Tesla Model 3 AWD Performance (E10-87-001-05-22)","description":"\u003cp\u003eThe Eibach Pro-Kit lowering springs for the Tesla Model 3 AWD Performance are Eibach's street-oriented spring set for a lower stance and sharper handling. Part E10-87-001-05-22.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Pro-Kit Lowering Springs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring material:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring ends:\u003c\/strong\u003e OEM-style at both ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3 AWD Performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2022 Tesla 3 Performance; 2018-2023 Tesla 3 Performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEibach part number:\u003c\/strong\u003e E10-87-001-05-22\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e 18-20 Tesla Model 3 AWD Performance Pro-Kit\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Eibach Pro-Kit\u003c\/h3\u003e\u003cp\u003ePro-Kit is Eibach's street-oriented lowering spring line. Eibach positions it as a way to lower the car and sharpen handling while keeping ride quality close to stock.\u003c\/p\u003e\u003cp\u003eEibach was founded in 1951 by Heinrich Eibach and is headquartered in Finnentrop, Germany. Its U.S. subsidiary, Eibach Springs, Inc., was founded in 1987.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEibach parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52944443638058,"sku":"eibE10-87-001-05-22","price":395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/e8633886b10eb2756517a36fe7c07bacL_ae26c430-213a-449c-bcee-72c9dd363eb2.jpg?v=1792032435"},{"product_id":"eibe10-87-001-04-22-pro-kit-lowering-springs-for-2017-2020-tesla-model-3-standard-range","title":"Eibach Pro-Kit Lowering Springs for 2017–2020 Tesla Model 3 Standard Range (E10-87-001-04-22)","description":"\u003cp\u003eThe Eibach Pro-Kit lowering springs for the Tesla Model 3 Standard Range are Eibach's street-oriented spring set for a lower stance and sharper handling. Part E10-87-001-04-22.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Pro-Kit Lowering Springs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring material:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring ends:\u003c\/strong\u003e OEM-style at both ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3 Standard Range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2018-2019 Tesla 3 Base; 2022 Tesla 3 Base; 2020-2021 Tesla 3 Standard Plus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEibach part number:\u003c\/strong\u003e E10-87-001-04-22\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e Pro-Kit for 17-20 Tesla 3 Standard Range\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Eibach Pro-Kit\u003c\/h3\u003e\u003cp\u003ePro-Kit is Eibach's street-oriented lowering spring line. Eibach positions it as a way to lower the car and sharpen handling while keeping ride quality close to stock.\u003c\/p\u003e\u003cp\u003eEibach was founded in 1951 by Heinrich Eibach and is headquartered in Finnentrop, Germany. Its U.S. subsidiary, Eibach Springs, Inc., was founded in 1987.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEibach parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52944443769130,"sku":"eibE10-87-001-04-22","price":395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/d160b17bb85fea5b4ac6b6d02ef97e23L.jpg?v=1792032436"},{"product_id":"eibe10-87-001-01-22-pro-kit-lowering-springs-for-2017-2018-tesla-model-3-long-range-rwd","title":"Eibach Pro-Kit Lowering Springs for 2017–2018 Tesla Model 3 Long Range RWD (E10-87-001-01-22)","description":"\u003cp\u003eThe Eibach Pro-Kit lowering springs for the Tesla Model 3 Long Range RWD are Eibach's street-oriented spring set for a lower stance and sharper handling. Eibach lists the drop as about 1.2 in front and rear. Part E10-87-001-01-22.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Pro-Kit Lowering Springs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront lowering:\u003c\/strong\u003e 1.2 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear lowering:\u003c\/strong\u003e 1.2 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring material:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring ends:\u003c\/strong\u003e OEM-style at both ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3 Long Range RWD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2019 Tesla 3 Base; 2017-2019 Tesla 3 Long Range; 2019 Tesla 3 Performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEibach part number:\u003c\/strong\u003e E10-87-001-01-22\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e Pro-Kit for 17-18 Tesla 3 Long Range (RWD) 1.2in Front \u0026amp; Rear\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Eibach Pro-Kit\u003c\/h3\u003e\u003cp\u003ePro-Kit is Eibach's street-oriented lowering spring line. Eibach positions it as a way to lower the car and sharpen handling while keeping ride quality close to stock.\u003c\/p\u003e\u003cp\u003eEibach was founded in 1951 by Heinrich Eibach and is headquartered in Finnentrop, Germany. Its U.S. subsidiary, Eibach Springs, Inc., was founded in 1987.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEibach parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52944449175850,"sku":"eibE10-87-001-01-22","price":395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/6d58d544cdd8fda0925b8b2b3b08e057L_436ca22a-1fb9-4640-a9ce-00584805d170.jpg?v=1792032180"},{"product_id":"bil24-626231-b6-performance-rear-monotube-shock-absorber-for-2017-2023-tesla-model-3","title":"Bilstein B6 Performance Rear Monotube Shock Absorber for 2017–2023 Tesla Model 3 (24-626231)","description":"\u003cp\u003eThis Bilstein B6 Performance rear shock absorber is listed for the 2017–2023 Tesla Model 3. It is a monotube design. Part 24-626231.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart type:\u003c\/strong\u003e Shock Absorber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Monotube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpper mount:\u003c\/strong\u003e Stem\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower mount:\u003c\/strong\u003e Eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring seat included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Yellow Paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended length:\u003c\/strong\u003e 26.70 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCollapsed length:\u003c\/strong\u003e 17.80 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2017-2019 Tesla 3 Base; 2022-2024 Tesla 3 Base; 2017-2024 Tesla 3 Long Range; 2018-2023 Tesla 3 Performance; 2020-2021 Tesla 3 Standard Plus; 2024 Tesla Y Base; plus 3 more on file\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBilstein part number:\u003c\/strong\u003e 24-626231\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e B6 Performance 17-23 Tesla Model 3 Shock Absorber - Rear\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Bilstein B6 Performance\u003c\/h3\u003e\u003cp\u003eB6 Performance is Bilstein's sport damper line, built to the standard length for cars at stock ride height. Bilstein's B8 version is shorter for lowered cars.\u003c\/p\u003e\u003cp\u003eBilstein was founded in 1873 in Altenvoerde (today Ennepetal), Germany. In 1957 it introduced the first series-production monotube gas-pressure shock absorber, fitted to a Mercedes-Benz.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eBilstein parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. We can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":52946223005994,"sku":"bil24-626231","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/84f982001797f20229fad8779d946211L.jpg?v=1792037257"},{"product_id":"bil22-342683-b6-performance-front-right-twintube-strut-assembly-for-2017-2024-tesla-model-3","title":"Bilstein B6 Performance Front Right Twintube Strut Assembly for 2017–2024 Tesla Model 3 (22-342683)","description":"\u003cp\u003eThis Bilstein B6 Performance front right strut assembly is listed for the 2017–2024 Tesla Model 3. It is a twintube design. The strut assembly includes the spring seat. Part 22-342683.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart type:\u003c\/strong\u003e Strut Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front Right\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Twintube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpper mount:\u003c\/strong\u003e Stem\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower mount:\u003c\/strong\u003e Clevis\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring seat included:\u003c\/strong\u003e Yes - Fixed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoot included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Yellow Paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended length:\u003c\/strong\u003e 23.68 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCollapsed length:\u003c\/strong\u003e 19.06 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2017-2019 Tesla 3 Base; 2022-2024 Tesla 3 Base; 2017-2018 Tesla 3 Long Range; 2020-2021 Tesla 3 Standard Plus; 2024 Tesla Y Base; 2020-2021 Tesla Y Long Range; plus 1 more on file\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBilstein part number:\u003c\/strong\u003e 22-342683\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e 17-24 Tesla 3 \/ 20-21 Tesla Y B6 Twintube Front Right Suspension Strut Assembly\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Bilstein B6 Performance\u003c\/h3\u003e\u003cp\u003eB6 Performance is Bilstein's sport damper line, built to the standard length for cars at stock ride height. Bilstein's B8 version is shorter for lowered cars.\u003c\/p\u003e\u003cp\u003eBilstein was founded in 1873 in Altenvoerde (today Ennepetal), Germany. In 1957 it introduced the first series-production monotube gas-pressure shock absorber, fitted to a Mercedes-Benz.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eBilstein parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. We can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":52946223071530,"sku":"bil22-342683","price":140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/4f80782c338a87f1be61641f81cba09dL.jpg?v=1792037259"},{"product_id":"bil22-622662-b6-performance-front-left-twintube-strut-assembly-for-2017-2024-tesla-model-3","title":"Bilstein B6 Performance Front Left Twintube Strut Assembly for 2017–2024 Tesla Model 3 (22-622662)","description":"\u003cp\u003eThis Bilstein B6 Performance front left strut assembly is listed for the 2017–2024 Tesla Model 3. It is a twintube design. The strut assembly includes the spring seat. Part 22-622662.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart type:\u003c\/strong\u003e Strut Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front Left\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Twintube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpper mount:\u003c\/strong\u003e Stem\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower mount:\u003c\/strong\u003e Clevis\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring seat included:\u003c\/strong\u003e Yes - Fixed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoot included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Yellow Paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended length:\u003c\/strong\u003e 23.68 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCollapsed length:\u003c\/strong\u003e 19.06 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2017-2019 Tesla 3 Base; 2022-2024 Tesla 3 Base; 2017-2018 Tesla 3 Long Range; 2020-2021 Tesla 3 Standard Plus; 2024 Tesla Y Base; 2020-2021 Tesla Y Long Range; plus 1 more on file\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBilstein part number:\u003c\/strong\u003e 22-622662\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e 17-24 Tesla 3 \/ 20-21 Tesla Y B6 Twintube Front Left Suspension Strut Assembly\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Bilstein B6 Performance\u003c\/h3\u003e\u003cp\u003eB6 Performance is Bilstein's sport damper line, built to the standard length for cars at stock ride height. Bilstein's B8 version is shorter for lowered cars.\u003c\/p\u003e\u003cp\u003eBilstein was founded in 1873 in Altenvoerde (today Ennepetal), Germany. In 1957 it introduced the first series-production monotube gas-pressure shock absorber, fitted to a Mercedes-Benz.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eBilstein parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. We can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":52946223235370,"sku":"bil22-622662","price":140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/a78e32fe62516bd7a3df5131c960edbeL.jpg?v=1792037259"},{"product_id":"teinvsgp2-c1aa3-c-flex-z-coilover-kit-for-2017-tesla-model-3-rwd","title":"Tein Flex Z Coilover Kit for 2017+ Tesla Model 3 (RWD) (VSGP2-C1AA3-C)","description":"\u003cp\u003eThis Tein Flex Z Coilover Kit is listed for the 2017+ Tesla Model 3 (RWD). Part VSGP2-C1AA3-C.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine:\u003c\/strong\u003e Flex Z\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart type:\u003c\/strong\u003e Coilover kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2017+ Tesla Model 3 (RWD)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTein part number:\u003c\/strong\u003e VSGP2-C1AA3-C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e 2017+ Tesla Model 3 RWD Flex Z Coilovers\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Tein Flex Z\u003c\/h3\u003e\u003cp\u003eFlex Z is Tein's street coilover line, with adjustable damping force and full-length ride height adjustment.\u003c\/p\u003e\u003cp\u003eTein is a Japanese suspension manufacturer that makes shock absorbers, coilovers and lowering springs for street and motorsport cars.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eTein parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":52952806949162,"sku":"teinVSGP2-C1AA3-C","price":1130.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/ac8c64c910cec85763ff7055e555e093_71b97aa8-4157-4850-b4d2-2e2b9e02cd77.jpg?v=1792069453"},{"product_id":"teinvsgp4-b1ds2-endurapro-plus-front-and-rear-shock-kit-for-2017-tesla-model-3-and-2021-tesla-model-y","title":"Tein EnduraPro Plus Front and Rear Shock Kit for 2017+ Tesla Model 3 and 2021+ Tesla Model Y (VSGP4-B1DS2)","description":"\u003cp\u003eThis Tein EnduraPro Plus Front and Rear Shock Kit is listed for the 2017+ Tesla Model 3 and 2021+ Tesla Model Y. Part VSGP4-B1DS2.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine:\u003c\/strong\u003e EnduraPro Plus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart type:\u003c\/strong\u003e Shock absorber kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front \u0026amp; Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping adjustment:\u003c\/strong\u003e Adjustable (EnduraPro Plus)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2017+ Tesla Model 3 and 2021+ Tesla Model Y\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTein part number:\u003c\/strong\u003e VSGP4-B1DS2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e 21+ Tesla Model Y\/17+ Model 3 EnduraPro Plus Front and Rear Kit\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Tein EnduraPro Plus\u003c\/h3\u003e\u003cp\u003eEnduraPro Plus builds on Tein's EnduraPro replacement shock with adjustable damping, so ride comfort and handling can be set with the adjustment dial. It keeps factory ride height.\u003c\/p\u003e\u003cp\u003eTein is a Japanese suspension manufacturer that makes shock absorbers, coilovers and lowering springs for street and motorsport cars.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eTein parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. We can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":52952812028202,"sku":"teinVSGP4-B1DS2","price":627.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/cc4cd0e4-6a8a-4265-8c53-1ddd4df386b9-800_be7b02df-aa66-4c1a-8a78-3b4f4071bac5.jpg?v=1792069464"},{"product_id":"teinvbada-11544-l-endurapro-plus-front-left-shock-for-tesla-model-3-and-model-y-awd","title":"Tein EnduraPro Plus Front Left Shock for Tesla Model 3 and Model Y (AWD) (VBADA-11544-L)","description":"\u003cp\u003eThis Tein EnduraPro Plus Front Left Shock is listed for the Tesla Model 3 and Model Y (AWD). Part VBADA-11544-L.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine:\u003c\/strong\u003e EnduraPro Plus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart type:\u003c\/strong\u003e Shock absorber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front Left\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping adjustment:\u003c\/strong\u003e Adjustable (EnduraPro Plus)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model 3 and Model Y (AWD)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTein part number:\u003c\/strong\u003e VBADA-11544-L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e Tesla Model 3\/Y AWD Front Left EnduraPro Plus Shock\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Tein EnduraPro Plus\u003c\/h3\u003e\u003cp\u003eEnduraPro Plus builds on Tein's EnduraPro replacement shock with adjustable damping, so ride comfort and handling can be set with the adjustment dial. It keeps factory ride height.\u003c\/p\u003e\u003cp\u003eTein is a Japanese suspension manufacturer that makes shock absorbers, coilovers and lowering springs for street and motorsport cars.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eTein parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. We can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":52952828969258,"sku":"teinVBADA-11544-L","price":218.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/cc4cd0e4-6a8a-4265-8c53-1ddd4df386b9-800_cb988642-10d6-49dd-bd6e-37f201407e00.jpg?v=1792069501"}],"url":"https:\/\/team-anbd.com\/collections\/tesla.oembed?page=3","provider":"Team ANBD","version":"1.0","type":"link"}