{"title":"Tesla Model S Performance Parts","description":"\u003cp\u003eParts confirmed to fit the Tesla Model S, including the Plaid.\u003c\/p\u003e\u003cp\u003eTwo-piece floating rotors and replacement rings front and rear.\u003c\/p\u003e\u003cp\u003eThe Model S is heavier still than the Model 3 and the Plaid carries enormous speed into a braking zone. Factory discs are the limiting part long before the pads are. Tell us the year and whether the car is a Plaid and we will confirm fitment. Installation available at our shop in Andover, NJ.\u003c\/p\u003e","products":[{"product_id":"girodisc-2012-tesla-model-s-slotted-front-rotors","title":"GiroDisc 2012+ Tesla Model S Slotted Front Rotors","description":"\u003cp\u003eGiroDisc two-piece slotted front rotors for the 2012+ Tesla Model S. These replace the factory one-piece front rotors with a lighter, rebuildable floating assembly built for repeated track use.\u003c\/p\u003e\u003ch3\u003eWhy a GiroDisc two-piece rotor\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloating two-piece design.\u003c\/strong\u003e A cast iron disc ring is mounted to a central hat with high-strength alloy steel drive pins, so the ring can expand axially and radially with heat instead of fighting the hat. Anti-noise spring washers keep the float silent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6061-T6 aluminum hat.\u003c\/strong\u003e The hat is machined from U.S.-sourced 6061-T6 aircraft-specification aluminum, cutting rotating and unsprung weight against the one-piece factory casting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved internal vanes\u003c\/strong\u003e act as a centrifugal pump, forcing cooling air through the disc on track.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted, not cross-drilled.\u003c\/strong\u003e Slots sweep the pad face clean without the stress risers that make drilled rotors crack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRebuildable.\u003c\/strong\u003e When the iron is worn out you replace the rings only and keep the hats and hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e A1-173\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePriced and sold as a pair — one complete front axle set.\u003c\/li\u003e\n\u003cli\u003eTwo-piece rotor assemblies with aluminum hats, iron rings and all mounting hardware, assembled and ready to bolt on.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can bed the system in and \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787520831786,"sku":"girA1-173","price":1250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/408mm72v__12525.1677861543_64d1f58d-fc2e-4cfa-b405-5ede928bc7de.jpg?v=1790628102"},{"product_id":"girodisc-2021-tesla-model-s-plaid-slotted-front-rotors","title":"GiroDisc 2021+ Tesla Model S Plaid Slotted Front Rotors","description":"\u003cp\u003eGiroDisc two-piece slotted front rotors for the 2021+ Tesla Model S Plaid. These replace the factory one-piece front rotors with a lighter, rebuildable floating assembly built for repeated track use.\u003c\/p\u003e\u003ch3\u003eWhy a GiroDisc two-piece rotor\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloating two-piece design.\u003c\/strong\u003e A cast iron disc ring is mounted to a central hat with high-strength alloy steel drive pins, so the ring can expand axially and radially with heat instead of fighting the hat. Anti-noise spring washers keep the float silent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6061-T6 aluminum hat.\u003c\/strong\u003e The hat is machined from U.S.-sourced 6061-T6 aircraft-specification aluminum, cutting rotating and unsprung weight against the one-piece factory casting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved internal vanes\u003c\/strong\u003e act as a centrifugal pump, forcing cooling air through the disc on track.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted, not cross-drilled.\u003c\/strong\u003e Slots sweep the pad face clean without the stress risers that make drilled rotors crack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRebuildable.\u003c\/strong\u003e When the iron is worn out you replace the rings only and keep the hats and hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e A1-273\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePriced and sold as a pair — one complete front axle set.\u003c\/li\u003e\n\u003cli\u003eTwo-piece rotor assemblies with aluminum hats, iron rings and all mounting hardware, assembled and ready to bolt on.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can bed the system in and \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787522470186,"sku":"girA1-273","price":1650.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/408mm72v__12525.1677861543_6133f021-7015-4d80-adc9-fe6078fad629.jpg?v=1790628103"},{"product_id":"girodisc-2012-tesla-model-s-slotted-rear-rotors","title":"GiroDisc 2012+ Tesla Model S Slotted Rear Rotors","description":"\u003cp\u003eGiroDisc two-piece slotted rear rotors for the 2012+ Tesla Model S. These replace the factory one-piece rear rotors with a lighter, rebuildable floating assembly built for repeated track use.\u003c\/p\u003e\u003ch3\u003eWhy a GiroDisc two-piece rotor\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloating two-piece design.\u003c\/strong\u003e A cast iron disc ring is mounted to a central hat with high-strength alloy steel drive pins, so the ring can expand axially and radially with heat instead of fighting the hat. Anti-noise spring washers keep the float silent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6061-T6 aluminum hat.\u003c\/strong\u003e The hat is machined from U.S.-sourced 6061-T6 aircraft-specification aluminum, cutting rotating and unsprung weight against the one-piece factory casting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved internal vanes\u003c\/strong\u003e act as a centrifugal pump, forcing cooling air through the disc on track.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted, not cross-drilled.\u003c\/strong\u003e Slots sweep the pad face clean without the stress risers that make drilled rotors crack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRebuildable.\u003c\/strong\u003e When the iron is worn out you replace the rings only and keep the hats and hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e A2-273\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePriced and sold as a pair — one complete rear axle set.\u003c\/li\u003e\n\u003cli\u003eTwo-piece rotor assemblies with aluminum hats, iron rings and all mounting hardware, assembled and ready to bolt on.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can bed the system in and \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787532955946,"sku":"girA2-273","price":1300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/408mm72v__09015.1677861714_81857401-7bdf-4440-809c-8b5d2f44d3b9.jpg?v=1790628103"},{"product_id":"girodisc-2021-tesla-model-s-plaid-slotted-front-rings","title":"GiroDisc 2021+ Tesla Model S Plaid Slotted Front Rings","description":"\u003cp\u003eGiroDisc replacement cast iron rotor rings for the 2021+ Tesla Model S Plaid, front axle. When the iron is worn or heat-checked, you replace the rings and keep the hats — the reason a two-piece rotor is cheaper to own over time.\u003c\/p\u003e\u003ch3\u003eAbout replacement rings\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRings only — \u003cstrong\u003ealuminum hats are not included\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eNew installation hardware (cap screws, hardened washers and anti-noise spring washers) is supplied. GiroDisc does not recommend reusing old hardware.\u003c\/li\u003e\n\u003cli\u003eSlotted friction surface with curved internal cooling vanes, same specification as the original assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThese rings are machined for GiroDisc hats and will not mount to factory center hats.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e D1-273\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePriced and sold as a pair — one axle set of rings, plus new mounting hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can bed the system in and \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787556090154,"sku":"girD1-273","price":1030.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/rings__46899.1689725292_a6a81c4d-b3a5-4596-9a25-f7455f39a85c.jpg?v=1790628117"},{"product_id":"girodisc-2012-tesla-model-s-slotted-rear-rings","title":"GiroDisc 2012+ Tesla Model S Slotted Rear Rings","description":"\u003cp\u003eGiroDisc replacement cast iron rotor rings for the 2012+ Tesla Model S, rear axle. When the iron is worn or heat-checked, you replace the rings and keep the hats — the reason a two-piece rotor is cheaper to own over time.\u003c\/p\u003e\u003ch3\u003eAbout replacement rings\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRings only — \u003cstrong\u003ealuminum hats are not included\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eNew installation hardware (cap screws, hardened washers and anti-noise spring washers) is supplied. GiroDisc does not recommend reusing old hardware.\u003c\/li\u003e\n\u003cli\u003eSlotted friction surface with curved internal cooling vanes, same specification as the original assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThese rings are machined for GiroDisc hats and will not mount to factory center hats.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Tesla Model S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e D2-273\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePriced and sold as a pair — one axle set of rings, plus new mounting hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can bed the system in and \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787560448298,"sku":"girD2-273","price":780.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/rings__00934.1689725218_930fc16e-20fb-4d84-9935-6f9f99652a6d.jpg?v=1790628118"}],"url":"https:\/\/team-anbd.com\/collections\/tesla-model-s.oembed","provider":"Team ANBD","version":"1.0","type":"link"}