{"title":"Splitter Endplates","description":"\u003cp\u003eSplitter endplates close off the outer edge of a front splitter so high-pressure air cannot spill sideways off the platform — which is where a large splitter loses most of its effect.\u003c\/p\u003e\u003cp\u003eDesigns are matched to specific splitters, so check which splitter you are running before ordering.\u003c\/p\u003e\u003cp\u003eSend us the year, make and model along with your splitter and we will confirm it, or see the full range in \u003ca href=\"\/collections\/aerodynamics\"\u003eAerodynamics\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"front-splitter-endplates-bmw-e92-m3","title":"Front Splitter Endplates - BMW E92 M3","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eEven the largest builds need a finishing touch. The Front Splitter Endplates add both form and function to the E92 M3 aero suite, offering sharper styling alongside greater aerodynamic control.\u003c\/p\u003e\n\u003cp\u003eDesigned to work in conjunction with the Verus Engineering Front Splitter Kit, these endplates increase front-end downforce further without a large increase in drag. The vents are specifically shaped to reduce drag while keeping downforce where it needs to be.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D to extract maximum performance from the available build volume. The endplates pair particularly well with the UCW Rear Wing, adding balance to a potent aerodynamic suite.\u003c\/p\u003e\n\u003cp\u003eThey're printed in carbon nylon, which offers a strong surface finish and an excellent strength-to-weight ratio, integrating cleanly with the rest of the kit.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Carbon nylon 3D printed right-hand side endplate\u003c\/li\u003e\n\u003cli\u003e(1) Carbon nylon 3D printed left-hand side endplate\u003c\/li\u003e\n\u003cli\u003e(1) Hardware Kit, including all pieces necessary for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncreases front-end downforce and overall aerodynamic efficiency\u003c\/li\u003e\n\u003cli\u003eImproved vehicle aesthetics — the finishing touch to a dynamic component suite\u003c\/li\u003e\n\u003cli\u003eDesigned for the Verus Engineering Front Splitter Kit to help balance a larger rear wing such as the UCW Rear Wing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3D printed carbon nylon construction, CFD optimized for precision fit and function\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout for a seamless installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe endplates increase front-end downforce by widening the pressure delta between the top and bottom surfaces of the splitter, augmenting the splitter's ability to generate downforce without an increase in drag. They're part of the Ventus Aerodynamic Package, in which all components were designed to work together as a balanced system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0617A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eRequires the Verus Engineering Front Splitter Kit.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556005605674,"sku":"A0617A","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0617A_5D_20Front_20Splitter_20Endplates_20-_20BMW_20E92_20M3.jpg?v=1789000580"},{"product_id":"front-splitter-endplates-toyota-gr86-subaru-brz","title":"Front Splitter Endplates - Toyota GR86 \/ Subaru BRZ","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Verus Engineering Front Splitter Endplates increase front-end downforce without needing to move the splitter further forward. They're formed from ABS for a strong strength-to-weight ratio, and designed specifically to work with the Verus front splitter — though they may fit other units on the market.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D to extract more performance from the available build volume and confirm the units improve vehicle performance. In-house scan data gives a near-OEM fit and finish.\u003c\/p\u003e\n\u003cp\u003eDesigned for owners looking to combat front-end lift or balance out rear aerodynamic devices. If you're understeering at high speeds, these may help improve front-end grip.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlastic Endplate, right-hand side\u003c\/li\u003e\n\u003cli\u003ePlastic Endplate, left-hand side\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all pieces necessary for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces lift \/ increases downforce\u003c\/li\u003e\n\u003cli\u003eImproved overall aerodynamic efficiency\u003c\/li\u003e\n\u003cli\u003eReduces lap times\u003c\/li\u003e\n\u003cli\u003eDesigned for the Verus Engineering front splitter, but will fit other aftermarket units\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD optimized design\u003c\/li\u003e\n\u003cli\u003eFormed ABS construction\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware included\u003c\/li\u003e\n\u003cli\u003eStainless hardware used throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe endplates increase front-end downforce for drivers needing additional grip at high speed, widening the pressure delta between the top and bottom surfaces of the splitter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0441A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556036538666,"sku":"A0441A","price":219.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0441A_5D_20Front_20Splitter_20Endplates_20-_20Toyota_20GR86_20-_20Subaru_20BRZ.jpg?v=1789001755"},{"product_id":"front-splitter-endplates-standard-front-splitter-toyota-supra","title":"Front Splitter Endplates, Standard Front Splitter - Toyota Supra","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThese Front Splitter Endplates increase front-end downforce on the standard Verus front splitter. They work by increasing the high-pressure zone above the splitter and improving evacuation in the wheel well. The vents are placed strategically to improve efficiency.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D to extract more performance from the available build volume and confirm the units improve vehicle performance. They're printed in carbon nylon, which offers a good surface finish and an excellent strength-to-weight ratio.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e these fit the \u003cem\u003estandard\u003c\/em\u003e Verus front splitter. If you're running the High Downforce Front Splitter, you need part A0502A instead.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon nylon 3D printed right-hand side endplate\u003c\/li\u003e\n\u003cli\u003eCarbon nylon 3D printed left-hand side endplate\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all pieces necessary for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncreases downforce\u003c\/li\u003e\n\u003cli\u003eImproved overall aerodynamic efficiency\u003c\/li\u003e\n\u003cli\u003eReduces lap times\u003c\/li\u003e\n\u003cli\u003eDesigned for the Verus Engineering front splitter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD optimized design\u003c\/li\u003e\n\u003cli\u003e3D printed carbon nylon construction\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware included\u003c\/li\u003e\n\u003cli\u003eStainless hardware used throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe endplates increase front-end downforce for drivers needing additional grip at high speed, widening the pressure delta between the splitter's top and bottom surfaces and improving wheel well evacuation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0505A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556125307178,"sku":"A0505A","price":179.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0505A_5D_20Front_20Splitter_20Endplates_2C_20Standard_20Front_20Splitter_20-_20Toyota_20Supra_fb52b63c-047a-47e6-ab27-f5a4ac174349.jpg?v=1789003344"},{"product_id":"front-splitter-endplates-high-downforce-splitter-toyota-supra","title":"Front Splitter Endplates, High Downforce Splitter - Toyota Supra","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThese Front Splitter Endplates increase front-end downforce further on the High Downforce Front Splitter Kit. Developed alongside that splitter, they improve downforce production without a large increase in drag — the vents are specifically shaped to reduce drag while keeping downforce where it needs to be.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D to extract more performance from the available build volume. They're printed in carbon nylon, which offers a good surface finish and an excellent strength-to-weight ratio.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e these fit the \u003cem\u003eHigh Downforce\u003c\/em\u003e front splitter. If you're running the standard splitter, you need part A0505A instead.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon nylon 3D printed right-hand side endplate\u003c\/li\u003e\n\u003cli\u003eCarbon nylon 3D printed left-hand side endplate\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all pieces necessary for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncreases front-end downforce\u003c\/li\u003e\n\u003cli\u003eImproved overall aerodynamic efficiency\u003c\/li\u003e\n\u003cli\u003eReduces lap times\u003c\/li\u003e\n\u003cli\u003eDesigned for the Verus Engineering High Downforce Front Splitter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD optimized design\u003c\/li\u003e\n\u003cli\u003e3D printed carbon nylon construction\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware included\u003c\/li\u003e\n\u003cli\u003eStainless hardware used throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe endplates increase front-end downforce for drivers needing additional grip at high speed, widening the pressure delta between the splitter's top and bottom surfaces. They're part of the Ventus 3+ package, designed to dramatically improve the Supra's aerodynamic performance in a balanced, safe way with every component working together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0502A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556131795242,"sku":"A0502A","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0502A_5D_20Front_20Splitter_20Endplates_2C_20High_20Downforce_20Splitter_20-_20Toyota_20Supra_ceb242ca-76c7-4065-9615-967a8d68b77f.jpg?v=1789003360"},{"product_id":"front-splitter-endplates-brz-frs-gt86","title":"Front Splitter Endplates - BRZ\/FRS\/GT86","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Verus Engineering Front Splitter Endplates increase front-end downforce without needing to move the splitter further forward. They're constructed from pre-preg carbon fiber for a superior strength-to-weight ratio, and designed specifically to work with the Verus front splitter — though they may fit other units on the market.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D to extract more performance from the available build volume, and in-house scan data gives a near-OEM fit and finish.\u003c\/p\u003e\n\u003cp\u003eDesigned for owners looking to combat front-end lift or balance out rear aerodynamic devices. If you're understeering at high speeds, these may help improve front-end grip.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoose your finish:\u003c\/strong\u003e gloss clear or matte clear.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Endplate, right-hand side\u003c\/li\u003e\n\u003cli\u003eCarbon Endplate, left-hand side\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all pieces necessary for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces lift \/ increases downforce\u003c\/li\u003e\n\u003cli\u003eImproved overall aerodynamic efficiency\u003c\/li\u003e\n\u003cli\u003eReduces lap times\u003c\/li\u003e\n\u003cli\u003eDesigned for the Verus Engineering front splitter, but will fit other aftermarket units\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD optimized design\u003c\/li\u003e\n\u003cli\u003eDry carbon construction\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware included\u003c\/li\u003e\n\u003cli\u003eStainless hardware used throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe endplates increase front-end downforce for drivers needing additional grip at high speed, widening the pressure delta between the splitter's top and bottom surfaces. They're part of the Ventus 2 package, designed to dramatically improve aerodynamic performance in a balanced, safe way with every component working together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Numbers:\u003c\/strong\u003e A0040A-GLOSS (gloss clear) \/ A0040A-MATTE (matte clear)\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Gloss Clear","offer_id":52556261097770,"sku":"A0040A-GLOSS","price":239.95,"currency_code":"USD","in_stock":true},{"title":"Matte Clear","offer_id":52556261130538,"sku":"A0040A-MATTE","price":239.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0040A-GLOSS_5D_20Front_20Splitter_20Endplates_20-_20BRZ-FRS-GT86_20_28Gloss_20Clear_29.jpg?v=1789004449"},{"product_id":"high-downforce-front-splitter-endplates-corvette-stingray-c8","title":"High Downforce Front Splitter Endplates - Corvette Stingray (C8)","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThese endplates increase front-end downforce further by widening the pressure difference between the top and bottom of the splitter blade. They're used in conjunction with the High Downforce Front Splitter Kit (A0830A). The vents are specifically shaped to reduce drag while keeping downforce high, improving efficiency.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D to extract more performance from the available build volume. They work particularly well when paired with the V1X Swan Neck Rear Wing.\u003c\/p\u003e\n\u003cp\u003ePrinted in carbon nylon, which offers a good surface finish and an excellent strength-to-weight ratio.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Carbon nylon 3D printed right-hand side endplate\u003c\/li\u003e\n\u003cli\u003e(1) Carbon nylon 3D printed left-hand side endplate\u003c\/li\u003e\n\u003cli\u003e(1) Hardware Kit, including all pieces necessary for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncreases front-end downforce and overall aerodynamic efficiency\u003c\/li\u003e\n\u003cli\u003eCFD optimized for improved performance\u003c\/li\u003e\n\u003cli\u003eImproved vehicle aesthetics — the finishing touch to a dynamic component suite\u003c\/li\u003e\n\u003cli\u003eDesigned for the High Downforce Front Splitter Kit, balancing a larger rear wing such as the V1X Swan Neck\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIn-house 3D printed carbon nylon construction\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe endplates increase front-end downforce for drivers needing additional grip at high speed, widening the pressure delta between the splitter's top and bottom surfaces and augmenting the splitter's ability to generate downforce without a large drag increase. Part of the Ventus 4 package.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0831A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556764709162,"sku":"A0831A","price":209.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0831A_5D_20High_20Downforce_20Front_20Splitter_20Endplates_20-_20Corvette_20Stingray_20_28C8_29.webp?v=1789009721"},{"product_id":"front-splitter-endplates-wf-spec-corvette-stingray-c8","title":"Front Splitter Endplates, WF Spec - Corvette Stingray (C8)","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eEven the largest builds need a finishing touch. These Front Splitter Endplates add both form and function, offering sharper styling alongside greater aerodynamic control.\u003c\/p\u003e\n\u003cp\u003eDesigned to increase front-end downforce when used in conjunction with the Verus Front Splitter Kit. The vents are specifically shaped to reduce drag while keeping downforce where it needs to be.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D to extract more performance from the available build volume. They pair well with the V1X Swan Neck Rear Wing.\u003c\/p\u003e\n\u003cp\u003ePrinted in carbon nylon, which offers a good surface finish and an excellent strength-to-weight ratio.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Carbon nylon 3D printed right-hand side endplate\u003c\/li\u003e\n\u003cli\u003e(1) Carbon nylon 3D printed left-hand side endplate\u003c\/li\u003e\n\u003cli\u003e(1) Hardware Kit, including all pieces necessary for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncreases front-end downforce and overall aerodynamic efficiency\u003c\/li\u003e\n\u003cli\u003eCFD optimized for precision fit and function\u003c\/li\u003e\n\u003cli\u003eImproved vehicle aesthetics\u003c\/li\u003e\n\u003cli\u003eDesigned for the Verus Front Splitter Kit, balancing a larger rear wing such as the V1X Swan Neck\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIn-house 3D printed carbon nylon construction\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe endplates widen the pressure delta between the splitter's top and bottom surfaces, augmenting its ability to generate downforce without a large drag increase. Part of the Ventus 3 package.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0699A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eWF Spec — for the standard Front Splitter Kit. If you're running the High Downforce splitter, use A0831A instead.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556770181418,"sku":"A0699A","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0699A_5D_20Front_20Splitter_20Endplates_2C_20WF_20Spec_20-_20Corvette_20Stingray_20_28C8_29.jpg?v=1789009764"},{"product_id":"front-splitter-endplates-g87-bmw-m2","title":"Front Splitter Endplates - G87 BMW M2","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThese endplates increase front-end downforce further when fitted to the Verus G87 front splitter kit. The vents are specifically shaped to reduce drag while keeping downforce where it needs to be, so the gain comes without a large drag penalty.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D to extract more performance from the available build volume.\u003c\/p\u003e\n\u003cp\u003ePrinted in carbon nylon, which offers a good surface finish and an excellent strength-to-weight ratio.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon nylon 3D printed right-hand side endplate\u003c\/li\u003e\n\u003cli\u003eCarbon nylon 3D printed left-hand side endplate\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all pieces necessary for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncreases front-end downforce and overall aerodynamic efficiency\u003c\/li\u003e\n\u003cli\u003eVented design to limit drag increase\u003c\/li\u003e\n\u003cli\u003eCFD optimized for improved performance\u003c\/li\u003e\n\u003cli\u003eAdds a more aggressive front-end appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIn-house 3D printed carbon nylon construction\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe endplates widen the pressure delta between the splitter's top and bottom surfaces, augmenting the splitter's ability to generate downforce.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0613A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eRequires the Verus G87 M2 Front Splitter Kit (A0536A) — these are an add-on, not a standalone part.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556877300010,"sku":"A0613A","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0613A_5D_20Front_20Splitter_20Endplates_20-_20G87_20BMW_20M2.jpg?v=1789011207"},{"product_id":"front-splitter-endplates-g80-bmw-m3-g82-bmw-m4","title":"Front Splitter Endplates - G80 BMW M3, G82 BMW M4","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThese endplates increase front-end downforce further when fitted to the Verus G80\/G82 front splitter kit. The vents are specifically shaped to reduce drag while keeping downforce where it needs to be, so the gain comes without a large drag penalty.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D to extract more performance from the available build volume.\u003c\/p\u003e\n\u003cp\u003ePrinted in carbon nylon, which offers a good surface finish and an excellent strength-to-weight ratio.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Carbon nylon 3D printed right-hand side endplate\u003c\/li\u003e\n\u003cli\u003e(1) Carbon nylon 3D printed left-hand side endplate\u003c\/li\u003e\n\u003cli\u003e(1) Hardware Kit, including all pieces necessary for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncreases front-end downforce and overall aerodynamic efficiency\u003c\/li\u003e\n\u003cli\u003eVented design to limit drag increase\u003c\/li\u003e\n\u003cli\u003eCFD optimized for improved performance\u003c\/li\u003e\n\u003cli\u003eAdds a more aggressive front-end appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIn-house 3D printed carbon nylon construction\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0658A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eRequires the Verus G80\/G82 Front Splitter Kit (A0654A) — these are an add-on, not a standalone part. Fits BMW G80 M3 and G82 M4.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556907807018,"sku":"A0658A","price":219.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0658A_5D_20Front_20Splitter_20Endplates_20-_20G80_20BMW_20M3_2C_20G82_20BMW_20M4.jpg?v=1789011642"},{"product_id":"front-splitter-endplates-subaru-wrx-vb","title":"Front Splitter Endplates - Subaru WRX (VB)","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThese endplates increase front-end downforce further when fitted to the Verus VB front splitter. The vents are shaped to reduce drag while keeping downforce where it needs to be, so the gain comes without a large drag penalty.\u003c\/p\u003e\n\u003cp\u003ePrinted in carbon nylon, which offers a good surface finish and an excellent strength-to-weight ratio.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon nylon 3D printed right-hand side endplate\u003c\/li\u003e\n\u003cli\u003eCarbon nylon 3D printed left-hand side endplate\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all pieces necessary for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncreases front-end downforce and overall aerodynamic efficiency\u003c\/li\u003e\n\u003cli\u003eVented design to limit drag increase\u003c\/li\u003e\n\u003cli\u003eCFD optimized for improved performance\u003c\/li\u003e\n\u003cli\u003eAdds a more aggressive front-end appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIn-house 3D printed carbon nylon construction\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0701A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eRequires the Verus VB WRX Front Splitter (A0484A) — these are an add-on, not a standalone part.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556918653226,"sku":"A0701A","price":189.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0701A_5D_20Front_20Splitter_20Endplates_20-_20Subaru_20WRX_20_28VB_29.jpg?v=1789011861"}],"url":"https:\/\/team-anbd.com\/collections\/splitter-endplates.oembed","provider":"Team ANBD","version":"1.0","type":"link"}