{"title":"Porsche Performance Parts","description":"\u003cp\u003ePerformance parts for the Porsche 911 (964\/993, 996, 997, 991 and 992) and the mid-engine cars: the 986 Boxster, 987 Cayman, 981 Cayman\/Boxster and 718 Cayman\/Boxster.\u003c\/p\u003e\u003cp\u003eGiroDisc two-piece rotors and rings, KW coilovers and H.A.S. springs, Suspension Secrets arms and camber hardware, Verus Engineering aero, EBC, Hawk and DBA brakes, and caliper rebuild parts.\u003c\/p\u003e\u003cp\u003eMany of these cars have PASM or a front-axle lift system, and the product titles say whether a kit works with them. Check that line before ordering, or ask us. Installation available at our shop in Andover, NJ.\u003c\/p\u003e","products":[{"product_id":"front-splitter-kit-porsche-718-gt4","title":"Front Splitter Kit - Porsche 718 GT4","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eFront splitters produce front-end downforce without significantly increasing drag, by creating a large pressure delta between their top and bottom surfaces. This one was sized against the rear wing to hold a proper aero balance and reduce lap times.\u003c\/p\u003e\n\u003cp\u003eThe splitter is produced from carbon thermoplastic, the same material used in top-tier motorsport. It isn't brittle, so no cracking like carbon fiber or ABS, and it won't grab and bend under the car like aluminum. It abrades and takes a beating without losing performance or appearance.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Carbon Composite Splitter, left-hand\u003c\/li\u003e\n\u003cli\u003e(1) Carbon Composite Splitter, right-hand\u003c\/li\u003e\n\u003cli\u003e(7 pieces) Sheet Metal Bracket Kit\u003c\/li\u003e\n\u003cli\u003e(1) Cross Brace Beam\u003c\/li\u003e\n\u003cli\u003e(1) Splitter Tie\u003c\/li\u003e\n\u003cli\u003e(1) Machined Clevis\u003c\/li\u003e\n\u003cli\u003e(1) Hardware Kit including all necessary bolts, nuts and washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGreatly increases front-end downforce\u003c\/li\u003e\n\u003cli\u003eProduces high downforce suitable for large rear wings\u003c\/li\u003e\n\u003cli\u003eCapable of handling 300+ lbs\u003c\/li\u003e\n\u003cli\u003eCarbon thermoplastic construction — strength, low weight, durability and appearance\u003c\/li\u003e\n\u003cli\u003eSame material used in Indy Car, NASCAR and F1\u003c\/li\u003e\n\u003cli\u003eNon-invasive, easy install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon thermoplastic front splitter\u003c\/li\u003e\n\u003cli\u003eWill not grab and bend surfaces like aluminum units\u003c\/li\u003e\n\u003cli\u003eWill not crack and break like carbon and ABS units\u003c\/li\u003e\n\u003cli\u003eAbrasion resistant while remaining stiff\u003c\/li\u003e\n\u003cli\u003eCarbon fiber air dam\u003c\/li\u003e\n\u003cli\u003eCNC cut and bent brackets\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eIterative design work extracted more performance from the splitter, air dam and diffuser combination, sizing the splitter and dive planes to counteract the rear wing and diffuser for a safe, effective aero balance. Part of the Ventus 2 kit for the 718 GT4, which boosts downforce significantly over factory while keeping the car street-usable through reasonable splitter protrusion and wing widths.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0300A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556774834474,"sku":"A0300A","price":3299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0300A_5D_20Front_20Splitter_20Kit_20-_20Porsche_20718_20GT4.jpg?v=1789009837"},{"product_id":"ucw-rear-wing-kit-porsche-981-718-gt4","title":"UCW Rear Wing Kit - Porsche 981\/718 GT4","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe UCW Rear Wing significantly increases rear downforce on the Porsche 981 and 718, boosting confidence on track and reducing lap times. Designed to work with factory or aftermarket uprights, it bolts on like a stock replacement wing.\u003c\/p\u003e\n\u003cp\u003eThe airfoil was optimized within the available build volume — derived from the V1X — using state-of-the-art analysis software, with CFD confirming the wing receives adequate airflow once installed. In-house scan data gives a near-OEM fit and finish across both the 718 GT4 and the 981 GT4.\u003c\/p\u003e\n\u003cp\u003eBest suited to the track driver needing a moderate increase in rear downforce to balance a significant front aero package.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUCW Wings are assembled per order and ship within 5 business days of receipt of order unless otherwise specified.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear Wing Element Assembly\u003c\/li\u003e\n\u003cli\u003eFFV Rear Wing Carbon Endplate (2)\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all parts necessary for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized airfoil using the ANSYS Adjoint Solver\u003c\/li\u003e\n\u003cli\u003eImproved efficiency (L\/D)\u003c\/li\u003e\n\u003cli\u003eIncreased downforce\u003c\/li\u003e\n\u003cli\u003eCapable of generating and withstanding 500+ lbs of downforce\u003c\/li\u003e\n\u003cli\u003eCapable of balancing out significant front aerodynamic systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon fiber rear wing — 2x2 twill pre-preg carbon, autoclave cured, automotive high-gloss clear\u003c\/li\u003e\n\u003cli\u003eMachined billet aluminum wing mount\u003c\/li\u003e\n\u003cli\u003e2x2 twill carbon fiber endplates\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe wing generates downforce across a 0 to 15 degree angle of attack range, letting it balance a variety of front aerodynamic kits. Verus CFD data and real-world experimental data correlate closely.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0292A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 981 GT4 and 718 GT4.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556775948586,"sku":"A0292A","price":3299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0292A_5D_20UCW_20Rear_20Wing_20Kit_20-_20Porsche_20981-718_20GT4.jpg?v=1789009855"},{"product_id":"rear-diffuser-panel-kit-porsche-718-gt4-gt4rs","title":"Rear Diffuser Panel Kit - Porsche 718 GT4\/GT4RS","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe factory 718 GT4 rear diffuser performs well — until you swap the suitcase-style mufflers for an aftermarket exhaust. At that point the bumper becomes a parachute and hurts vehicle performance.\u003c\/p\u003e\n\u003cp\u003eThis kit fills that void. Using diffuser strakes and a properly fitted panel, it contains the horseshoe vortices coming off the rear wheels, improving performance and ensuring the factory center diffuser gets clean airflow.\u003c\/p\u003e\n\u003cp\u003eIn-house scan data gives a near-OEM fit and finish, and analysis software confirmed the improvement over the OE setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e not compatible with OEM mufflers. This kit is specifically for cars running an aftermarket exhaust.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDiffuser Panel, left-hand side\u003c\/li\u003e\n\u003cli\u003eDiffuser Panel, right-hand side\u003c\/li\u003e\n\u003cli\u003eDiffuser Panel Bracket (2)\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all necessary pieces for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces drag\u003c\/li\u003e\n\u003cli\u003eFeeds the diffuser clean air\u003c\/li\u003e\n\u003cli\u003eIncreases fuel economy\u003c\/li\u003e\n\u003cli\u003eDecreases lift\u003c\/li\u003e\n\u003cli\u003eSimple, non-invasive bolt-on design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD optimized design\u003c\/li\u003e\n\u003cli\u003e5052 aluminum sheet metal\u003c\/li\u003e\n\u003cli\u003eCNC laser cut, CNC press brake bent\u003c\/li\u003e\n\u003cli\u003ePowder-coated black for durability\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0497A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 718 GT4 and GT4 RS.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556777193770,"sku":"A0497A","price":549.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0497A_5D_20Rear_20Diffuser_20Panel_20Kit_20-_20Porsche_20718_20GT4-GT4RS.jpg?v=1789009871"},{"product_id":"v1x-rear-wing-kit-porsche-981-718-gt4","title":"V1X Rear Wing Kit - Porsche 981\/718 GT4","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eA 300mm chord swan neck wing that dramatically improves rear-end grip at speed. The wing and full aero kit were developed in CFD to improve track performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe wing alone cuts serious lap time.\u003c\/strong\u003e In back-to-back customer testing on a relatively stock GT4 at just 4 degrees angle of attack, Verus recorded a reduction of \u003cstrong\u003e2.5 seconds at Thunderhill and 3.3 seconds at Laguna Seca\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt installs like the OEM wing, with no permanent modifications to the car. Construction matches high-end motorsport practice, which is how the wing weighs a mere 8 lbs. The uprights are CNC machined from 6061-T6 aluminum and FEA analyzed to keep strength high and weight minimal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eV1X Wings are assembled per order and ship within 5 business days of receipt of order unless otherwise specified.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Rear Wing, 300mm swan neck\u003c\/li\u003e\n\u003cli\u003eCarbon Vented Endplate (2)\u003c\/li\u003e\n\u003cli\u003eBillet Swan Neck Mount (2)\u003c\/li\u003e\n\u003cli\u003eBillet Swan Neck Upright (2)\u003c\/li\u003e\n\u003cli\u003eBillet Trunk Beauty Plate (2)\u003c\/li\u003e\n\u003cli\u003eGurney Flap with 3M VHB tape\u003c\/li\u003e\n\u003cli\u003eTrunk Strut\u003c\/li\u003e\n\u003cli\u003eDouble-sided tape for beauty plates and upright bolt covers\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2x2 twill, 3k, pre-preg carbon fiber\u003c\/li\u003e\n\u003cli\u003eCarbon inner rib for strength\u003c\/li\u003e\n\u003cli\u003eCarbon endplates\u003c\/li\u003e\n\u003cli\u003eWing weighs under 9 lbs\u003c\/li\u003e\n\u003cli\u003eMachined 6061-T6 aluminum mounts and uprights\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD optimized airfoil, highly efficient (great L\/D)\u003c\/li\u003e\n\u003cli\u003e15 total adjustment angles, -1 to 14 degrees\u003c\/li\u003e\n\u003cli\u003eCapable of generating and handling over 700 lbs of downforce at 120 MPH\u003c\/li\u003e\n\u003cli\u003eSwan neck design for improved efficiency from the wing element\u003c\/li\u003e\n\u003cli\u003eOEM bolt-on install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe airfoil profile was run through the ANSYS adjoint solver and iteratively improved. The wing was positioned to create a good aero balance with the rest of the Ventus 2 kit, which produces a significant downforce increase over the factory car. Verus CFD data and real-world experimental data correlate closely.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0149A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 981 GT4 and 718 GT4.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556789088554,"sku":"A0149A","price":6499.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0149A_5D_20V1X_20Rear_20Wing_20Kit_20-_20Porsche_20981-718_20GT4.jpg?v=1789009906"},{"product_id":"front-splitter-kit-porsche-981-gt4-cayman","title":"Front Splitter Kit - Porsche 981 GT4 Cayman","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eFront splitters produce front-end downforce without significantly increasing drag, by creating a large pressure delta between their top and bottom surfaces. This one adds design tweaks to the splitter's underside, working with the carbon splitter diffusers to improve flow.\u003c\/p\u003e\n\u003cp\u003eThe splitter is produced from carbon thermoplastic, the same material used in top-tier motorsport — not brittle, so no cracking like carbon fiber or ABS, and it won't grab and bend under the car like aluminum.\u003c\/p\u003e\n\u003cp\u003eThe air dam brings the splitter flat with the underbody, produced from pre-preg carbon fiber and autoclave cured for reduced weight and improved strength.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping note:\u003c\/strong\u003e ships via freight on a pallet due to the size of the package.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Spill Plate (2)\u003c\/li\u003e\n\u003cli\u003eCarbon Front Air Dam\u003c\/li\u003e\n\u003cli\u003eCarbon Composite Splitter\u003c\/li\u003e\n\u003cli\u003eCarbon Splitter Diffuser (2)\u003c\/li\u003e\n\u003cli\u003eSheet Aluminum Bracket (10 pieces)\u003c\/li\u003e\n\u003cli\u003eHardware Kit including all necessary bolts, nuts and washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGreatly increases front-end downforce\u003c\/li\u003e\n\u003cli\u003eProduces high downforce suitable for large rear wings\u003c\/li\u003e\n\u003cli\u003eCapable of handling 300+ lbs\u003c\/li\u003e\n\u003cli\u003eCarbon thermoplastic construction — strength, low weight, durability and appearance\u003c\/li\u003e\n\u003cli\u003eSame material used in Indy Car, NASCAR and F1\u003c\/li\u003e\n\u003cli\u003eNon-invasive, easy install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon thermoplastic front splitter\u003c\/li\u003e\n\u003cli\u003eWill not grab and bend surfaces like aluminum units\u003c\/li\u003e\n\u003cli\u003eWill not crack and break like carbon and ABS units\u003c\/li\u003e\n\u003cli\u003eAbrasion resistant while remaining stiff\u003c\/li\u003e\n\u003cli\u003eCarbon fiber air dam with aircraft nut plates\u003c\/li\u003e\n\u003cli\u003eCNC cut and bent brackets\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eIterative design work extracted more performance from the splitter, air dam and diffuser combination, sizing the splitter and dive planes to counteract the rear wing and diffuser for a safe, effective aero balance. Part of the Ventus 2 kit for the 981 GT4.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0153A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556789514538,"sku":"A0153A","price":5899.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0153A_5D_20Front_20Splitter_20Kit_20-_20Porsche_20981_20GT4_20Cayman.jpg?v=1789009924"},{"product_id":"carbon-rear-diffuser-porsche-981-cayman","title":"Carbon Rear Diffuser - Porsche 981 Cayman","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eRear diffusers are extremely efficient downforce-producing devices when designed properly. This one blends function and form using carbon fiber, sheet metal and hard rubber.\u003c\/p\u003e\n\u003cp\u003eScan data, CAD and ANSYS Fluent analysis produced a functional and attractive diffuser for the 981 chassis. The three main diffuser planes are 2x2 twill autoclave-cured carbon fiber; the strakes are durable polyurethane for longevity.\u003c\/p\u003e\n\u003cp\u003eThe whole unit bolts to chassis locations through multiple sheet metal brackets — \u003cstrong\u003eno drilling or fabrication required\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e the outside strakes require slight trimming if installing alongside the OEM GT4 muffler.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDiffuser Main Plane, left-hand\u003c\/li\u003e\n\u003cli\u003eDiffuser Main Plane, center\u003c\/li\u003e\n\u003cli\u003eDiffuser Main Plane, right-hand\u003c\/li\u003e\n\u003cli\u003eBracket (4)\u003c\/li\u003e\n\u003cli\u003eStrake, hard rubber (4)\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncreases downforce and reduces drag\u003c\/li\u003e\n\u003cli\u003eAnalyzed with ANSYS Fluent to maximize performance for the build volume\u003c\/li\u003e\n\u003cli\u003eFlows with the factory bumper lines\u003c\/li\u003e\n\u003cli\u003eDurable, replaceable strake design for longevity\u003c\/li\u003e\n\u003cli\u003eModular — a flat underbody cover can be added for improved performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2x2 twill, autoclave cured, 1.5mm thick carbon fiber construction\u003c\/li\u003e\n\u003cli\u003eLightweight bonded carbon strengthening sections atop the main planes for rigidity\u003c\/li\u003e\n\u003cli\u003eDurable, replaceable strake design\u003c\/li\u003e\n\u003cli\u003eCNC laser cut and bent 5052 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe diffuser and Flat Underbody Kit tie together the rear aerodynamic package of the 981 Cayman. Combined with the front dive plane kit that forms the Ventus 1 kit — a solid downforce gain with minimal drag increase. In the Ventus 2 kit, paired with the front splitter and rear wing, the downforce increase is significant.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0150A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556790726954,"sku":"A0150A","price":2199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0150A_5D_20Carbon_20Rear_20Diffuser_20-_20Porsche_20981_20Cayman.jpg?v=1789009942"},{"product_id":"dive-plane-kit-dual-element-porsche-718-gt4","title":"Dive Plane Kit, Dual Element - Porsche 718 GT4","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThese dive planes increase front-end downforce, feed more high-pressure airflow to the factory intake duct, and keep the drag increase minimal.\u003c\/p\u003e\n\u003cp\u003eThey produce a safe aero balance with or without the Verus rear wing. Designed in CAD from scan data and optimized using CFD in OpenFOAM.\u003c\/p\u003e\n\u003cp\u003eConstruction is 1.5mm thick pre-preg, autoclave cured, 2x2 twill carbon with an automotive clear finish. \u003cstrong\u003eChoose gloss or matte.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e not compatible with the 718 GT4 RS.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDive Plane, upper left\u003c\/li\u003e\n\u003cli\u003eDive Plane, lower left\u003c\/li\u003e\n\u003cli\u003eDive Plane, upper right\u003c\/li\u003e\n\u003cli\u003eDive Plane, lower right\u003c\/li\u003e\n\u003cli\u003eInstall template\u003c\/li\u003e\n\u003cli\u003e3M VHB tape (4 pieces, one per dive plane)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD optimized for improved performance\u003c\/li\u003e\n\u003cli\u003eShifts aero balance forward, improving front-end grip\u003c\/li\u003e\n\u003cli\u003eAllows fine tuning of aero balance\u003c\/li\u003e\n\u003cli\u003eSimple double-sided tape installation with templates included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2x2 weave, autoclave cured, 1.5mm thick carbon fiber\u003c\/li\u003e\n\u003cli\u003eUV resistant, automotive grade clear\u003c\/li\u003e\n\u003cli\u003e3M VHB double-sided tape, cut to dive plane sizes\u003c\/li\u003e\n\u003cli\u003eTemplates to aid installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eDive planes shift aerodynamic balance forward without needing a larger front splitter, which can make a car impractical on the street. Beyond downforce, this kit was designed to feed the intake ducts clean, high-pressure air — at speed that pressure builds in the intake and creates a small supercharge effect in the manifold, improving horsepower and torque while ensuring the coldest possible air reaches the filter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Numbers:\u003c\/strong\u003e A0284A-POL (gloss clear) \/ A0284A-MAT (matte clear)\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Gloss Clear","offer_id":52556800590122,"sku":"A0284A-POL","price":1099.95,"currency_code":"USD","in_stock":true},{"title":"Matte Clear","offer_id":52556800622890,"sku":"A0284A-MAT","price":1099.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0284A-POL_5D_20Dive_20Plane_20Kit_2C_20Dual_20Element_20-_20Porsche_20718_20GT4_20_28Gloss_20Clear_29.jpg?v=1789010063"},{"product_id":"dive-plane-kit-dual-elements-porsche-981-gt4","title":"Dive Plane Kit, Dual Elements - Porsche 981 GT4","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThese dive planes increase front-end downforce, feed more high-pressure airflow to the factory intake duct, and keep the drag increase minimal.\u003c\/p\u003e\n\u003cp\u003eThey produce a safe aero balance with or without the Verus rear diffuser. Designed in CAD from scan data and optimized using CFD in ANSYS Fluent.\u003c\/p\u003e\n\u003cp\u003eConstruction is 1.5mm thick pre-preg, autoclave cured, 2x2 twill carbon. \u003cstrong\u003eChoose gloss or matte clear.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDive Plane, upper left\u003c\/li\u003e\n\u003cli\u003eDive Plane, lower left\u003c\/li\u003e\n\u003cli\u003eDive Plane, upper right\u003c\/li\u003e\n\u003cli\u003eDive Plane, lower right\u003c\/li\u003e\n\u003cli\u003eInstall template\u003c\/li\u003e\n\u003cli\u003e3M VHB tape (4 pieces, one per dive plane)\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD optimized for improved performance\u003c\/li\u003e\n\u003cli\u003eShifts aero balance forward, improving front-end grip\u003c\/li\u003e\n\u003cli\u003eAllows fine tuning of aero balance\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on or double-sided tape installation with templates included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2x2 weave, autoclave cured, 1.5mm thick carbon fiber\u003c\/li\u003e\n\u003cli\u003eUV resistant, automotive grade clear\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003cli\u003e3M VHB double-sided tape, cut to dive plane sizes\u003c\/li\u003e\n\u003cli\u003eTemplates to aid installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eDive planes shift aerodynamic balance forward without needing a larger front splitter, which can make a car impractical on the street. Beyond downforce, this kit feeds the intake ducts clean, high-pressure air — at speed that pressure builds in the intake and creates a small supercharge effect in the manifold, improving horsepower and torque while ensuring the coldest possible air reaches the filter. Designed to work with the Ventus 2 kit for the GT4.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0151A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Gloss Clear","offer_id":52556802326826,"sku":"A0151A-GLOSS","price":1099.95,"currency_code":"USD","in_stock":true},{"title":"Matte Clear","offer_id":52556802359594,"sku":"A0151A-MATTE","price":1099.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0151A-GLOSS_5D_20Dive_20Plane_20Kit_2C_20Dual_20Elements_20-_20Porsche_20981_20GT4_20_28Gloss_20Clear_29.jpg?v=1789010081"},{"product_id":"side-splitters-kit-porsche-981-gt4","title":"Side Splitters Kit - Porsche 981 GT4","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Carbon Fiber Side Splitters complete the aerodynamic appearance of the 981 GT4 — designed to look the part and work, with CFD used to confirm on-track performance.\u003c\/p\u003e\n\u003cp\u003eThey help seal high-pressure air from reaching the underside of the car, reducing lift. Constructed from pre-preg carbon fiber for an excellent strength-to-weight ratio, with in-house scan data giving a near-OEM fit and finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoose gloss or matte clear.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstall note:\u003c\/strong\u003e the side splitters mount with plastic screws or rivet nuts into the factory plastic side skirt.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSide Splitter, left-hand\u003c\/li\u003e\n\u003cli\u003eSide Splitter, right-hand\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces lift\u003c\/li\u003e\n\u003cli\u003eReduces lap times\u003c\/li\u003e\n\u003cli\u003eIncreases gas mileage\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on installation\u003c\/li\u003e\n\u003cli\u003eExotic appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD tested\u003c\/li\u003e\n\u003cli\u003e2x2 twill pre-preg carbon construction\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on install\u003c\/li\u003e\n\u003cli\u003eStainless hardware used throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003ePart of the Ventus 2+ package for the 981 GT4, built to increase downforce efficiently with aero balance at the front of the design process. The side splitters improve downforce, reduce air spillage from under the car and raise overall vehicle efficiency — every piece in the Ventus 2+ kit was designed to work as a system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Numbers:\u003c\/strong\u003e A0167A-GLOSS (gloss clear) \/ A0167A-MATTE (matte clear)\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Gloss Clear","offer_id":52556803670314,"sku":"A0167A-GLOSS","price":1199.95,"currency_code":"USD","in_stock":true},{"title":"Matte Clear","offer_id":52556803703082,"sku":"A0167A-MATTE","price":1199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0167A-GLOSS_5D_20Side_20Splitters_20Kit_20-_20Porsche_20981_20GT4_20_28Gloss_20Clear_29.jpg?v=1789010098"},{"product_id":"ventus-1-package-porsche-718-gt4","title":"Ventus 1 Package - Porsche 718 GT4","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Ventus 1 package is an entry-level aerodynamic kit for the 718 GT4, designed to increase downforce and reduce lap times — a way to add performance while maintaining the factory warranty.\u003c\/p\u003e\n\u003cp\u003eThe Dual-Element Dive Planes improve front-end downforce by generating downforce on the units themselves and improving front fender evacuation. The Rear Diffuser Panels balance that by containing the horseshoe vortices coming off the rear wheels once the large factory muffler is swapped for an aftermarket exhaust, filling the leftover gaps so the factory center diffuser gets clean airflow.\u003c\/p\u003e\n\u003cp\u003eEvery product was developed with in-house scan data, CAD and CFD analysis, giving an OEM-like fit and finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoose gloss or matte clear\u003c\/strong\u003e for the dive planes.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Dual Element Dive Planes, gloss or matte finish\u003c\/li\u003e\n\u003cli\u003e(1) Rear Diffuser Panel Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSafe aero balance\u003c\/li\u003e\n\u003cli\u003eImproved efficiency (L\/D)\u003c\/li\u003e\n\u003cli\u003eIncreased downforce\u003c\/li\u003e\n\u003cli\u003eLow impact to drag\u003c\/li\u003e\n\u003cli\u003eTrue OEM-plus performance that flows with the factory body lines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDive planes — 2x2 twill weave, autoclave cured, 1.5mm thick carbon fiber, in your choice of automotive matte or high-gloss clear\u003c\/li\u003e\n\u003cli\u003eRear diffuser panels — 5052 aluminum sheet, CNC laser cut and press brake bent, powder-coated black\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout, with all necessary templates for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eAdding a little front downforce plus diffuser panels to feed the center diffuser clean air improves aerodynamic efficiency safely while keeping a near-stock, OEM+ appearance. Verus CFD data and real-world testing correlate closely.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0705A-V1\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNote: the diffuser panels are for cars running an aftermarket exhaust — they're not compatible with OEM mufflers.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Gloss Clear","offer_id":52556807209258,"sku":"A0705A-V1-GLOSS","price":1399.95,"currency_code":"USD","in_stock":true},{"title":"Matte Clear","offer_id":52556807242026,"sku":"A0705A-V1-MATTE","price":1399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0705A-V1-GLOSS_5D_20Ventus_201_20Package_20-_20Porsche_20718_20GT4_20_28Gloss_20Clear_29.jpg?v=1789010157"},{"product_id":"ventus-2-package-porsche-718-gt4","title":"Ventus 2 Package - Porsche 718 GT4","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Ventus 2 package delivers a substantial increase in downforce for a small drag penalty over Ventus 1, and improves total aerodynamic efficiency (L\/D) compared to both OEM and Ventus 1 — while still maintaining the balance of the factory warranty.\u003c\/p\u003e\n\u003cp\u003eIt replaces the factory wing with the UCW Rear Wing, significantly increasing rear downforce. Because the UCW can balance a corresponding increase in front aero, the kit adds the carbon polyweave front splitter, which greatly increases front grip and — paired with the dive planes — is sized to balance the wing and diffuser panels for a safe, effective aero balance.\u003c\/p\u003e\n\u003cp\u003eEvery product was developed with in-house scan data, CAD and CFD analysis, giving an OEM-like fit and finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoose gloss or matte clear\u003c\/strong\u003e for the dive planes.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Dual Element Dive Planes, gloss or matte finish\u003c\/li\u003e\n\u003cli\u003e(1) Rear Diffuser Panel Kit\u003c\/li\u003e\n\u003cli\u003e(1) Polyweave Front Splitter Kit\u003c\/li\u003e\n\u003cli\u003e(1) UCW Rear Wing Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSafe, efficient aero balance — more driver confidence, lower lap times\u003c\/li\u003e\n\u003cli\u003eImproved efficiency (L\/D) over Ventus 1 through the front splitter and UCW wing\u003c\/li\u003e\n\u003cli\u003eIncreased downforce front and rear\u003c\/li\u003e\n\u003cli\u003eSubstantially greater downforce than Ventus 1 with minimal added drag\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon fiber rear wing — 2x2 twill pre-preg carbon, autoclave cured, automotive high-gloss clear, with machined billet aluminum uprights\u003c\/li\u003e\n\u003cli\u003eFront splitter — carbon thermoplastic\u003c\/li\u003e\n\u003cli\u003eDive planes — 2x2 weave, autoclave cured, 1.5mm thick carbon fiber, in your choice of matte or high-gloss clear\u003c\/li\u003e\n\u003cli\u003eRear diffuser panels — 5052 aluminum sheet, CNC laser cut and press brake bent, powder-coated black\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout, with all necessary templates for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eBuilt for the 718 GT4 owner wanting balanced aerodynamic performance that builds on the car's existing track capability. The UCW wing and front splitter together add significant downforce, reducing lap times and increasing corner speed, in a package balanced for consistent high-performance use. Verus CFD data and real-world testing correlate closely.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0705A-V2\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNote: the diffuser panels are for cars running an aftermarket exhaust — they're not compatible with OEM mufflers.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Gloss Clear","offer_id":52556808225066,"sku":"A0705A-V2-GLOSS","price":7099.95,"currency_code":"USD","in_stock":true},{"title":"Matte Clear","offer_id":52556808257834,"sku":"A0705A-V2-MATTE","price":7099.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0705A-V2-GLOSS_5D_20Ventus_202_20Package_20-_20Porsche_20718_20GT4_20_28Gloss_20Clear_29.jpg?v=1789010176"},{"product_id":"flat-underbody-panel-kit-porsche-981-cayman-gt4","title":"Flat Underbody Panel Kit - Porsche 981 Cayman GT4","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eFinishing what Porsche started, these panels fill the void in the 981's underbody. The middle of a car generates drag, and covering those turbulent areas with flat sheet aluminum reduces it significantly. Cleaner airflow to the rear diffuser also lets the diffuser work better.\u003c\/p\u003e\n\u003cp\u003eProduced from sheet aluminum and powder-coated durable black. Pair with the Verus rear diffuser to reduce lift and drag simultaneously.\u003c\/p\u003e\n\u003cp\u003eCFD estimates the panels reduce the coefficient of drag by \u003cstrong\u003e0.007 — 7 points\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e works with other Porsche 981 models, but takes slight modification to mount.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlat Underbody Panel, left-hand\u003c\/li\u003e\n\u003cli\u003eFlat Underbody Panel, right-hand\u003c\/li\u003e\n\u003cli\u003eBracket (2)\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces drag\u003c\/li\u003e\n\u003cli\u003eIncreases gas mileage\u003c\/li\u003e\n\u003cli\u003eImproved diffuser function\u003c\/li\u003e\n\u003cli\u003eFlat underbody\u003c\/li\u003e\n\u003cli\u003eSimple install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCNC cut and bent 5052 aluminum\u003c\/li\u003e\n\u003cli\u003ePowder-coated black for durability\u003c\/li\u003e\n\u003cli\u003eStainless steel hardware throughout\u003c\/li\u003e\n\u003cli\u003eRivet-nut install tool included\u003c\/li\u003e\n\u003cli\u003eProduced in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe panels cover a large gap between the belly pan and the rear diffuser, decreasing underbody drag and improving the diffuser's ability to function. Part of both the Ventus 1 and Ventus 2 packages for the 981 GT4 — Ventus 1 adds downforce with minimal drag increase, Ventus 2 goes considerably further on downforce for drivers wanting the most from their car and tires.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0162A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556809240874,"sku":"A0162A","price":449.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0162A_5D_20Flat_20Underbody_20Panel_20Kit_20-_20Porsche_20981_20Cayman_20GT4.jpg?v=1789010192"},{"product_id":"carbon-rear-diffuser-porsche-987-cayman","title":"Carbon Rear Diffuser - Porsche 987 Cayman","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eRear diffusers are extremely efficient downforce-producing devices when designed properly. This one blends function and form using carbon fiber, sheet metal and hard rubber, and fits both the 987.1 and 987.2.\u003c\/p\u003e\n\u003cp\u003eScan data, CAD and ANSYS Fluent analysis produced a functional and attractive diffuser. The three main planes are 2x2 twill autoclave-cured carbon fiber; the strakes are durable polyurethane for longevity.\u003c\/p\u003e\n\u003cp\u003eThe whole unit bolts to chassis locations through multiple sheet metal brackets — \u003cstrong\u003eno drilling or fabrication required\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDiffuser Main Plane, left-hand\u003c\/li\u003e\n\u003cli\u003eDiffuser Main Plane, center\u003c\/li\u003e\n\u003cli\u003eDiffuser Main Plane, right-hand\u003c\/li\u003e\n\u003cli\u003eBracket (5)\u003c\/li\u003e\n\u003cli\u003eStrake, hard rubber (4)\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncreases downforce and reduces drag\u003c\/li\u003e\n\u003cli\u003eAnalyzed with ANSYS Fluent to maximize performance for the build volume\u003c\/li\u003e\n\u003cli\u003eFlows with the factory bumper lines\u003c\/li\u003e\n\u003cli\u003eDurable, replaceable strake design for longevity\u003c\/li\u003e\n\u003cli\u003eModular — a flat underbody cover can be added for improved performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2x2 twill, autoclave cured, 1.5mm thick carbon fiber construction\u003c\/li\u003e\n\u003cli\u003eLightweight bonded carbon strengthening sections atop the main planes for rigidity\u003c\/li\u003e\n\u003cli\u003eDurable, replaceable strake design\u003c\/li\u003e\n\u003cli\u003eCNC laser cut and bent 5052 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe diffuser and undertray tie together the rear aerodynamic package of the 987 Cayman. Combined with the front dive plane kit that forms the Ventus 1 kit — a solid downforce gain with minimal drag increase. In the Ventus 2 kit, paired with the front splitter and rear wing, the downforce increase is significant.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0133A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 987.1 and 987.2 Cayman.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556811338026,"sku":"A0133A","price":1899.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0133A_5D_20Carbon_20Rear_20Diffuser_20-_20Porsche_20987_20Cayman.jpg?v=1789010251"},{"product_id":"front-splitter-kit-porsche-cayman-987-2-only","title":"Front Splitter Kit - Porsche Cayman, 987.2 Only","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eFront splitters produce front-end downforce without significantly increasing drag, by creating a large pressure delta between their top and bottom surfaces. This one adds design tweaks to the splitter's underside to improve flow while working with the OE plastic underbody panels.\u003c\/p\u003e\n\u003cp\u003eThe splitter is produced from carbon thermoplastic, the same material used in top-tier motorsport — not brittle, so no cracking like carbon fiber or ABS, and it won't grab and bend under the car like aluminum.\u003c\/p\u003e\n\u003cp\u003eThe air dam brings the splitter flat with the underbody, produced from pre-preg carbon fiber and autoclave cured for reduced weight and improved strength.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e 987.2 only. This will not fit a 987.1.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping note:\u003c\/strong\u003e ships via freight on a pallet due to the size of the package.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Front Air Dam\u003c\/li\u003e\n\u003cli\u003eCarbon Composite Front Splitter Blade\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGreatly increases front-end downforce\u003c\/li\u003e\n\u003cli\u003eProduces high downforce suitable for large rear wings\u003c\/li\u003e\n\u003cli\u003eCapable of handling 300+ lbs\u003c\/li\u003e\n\u003cli\u003eCarbon thermoplastic construction — strength, low weight, durability and appearance\u003c\/li\u003e\n\u003cli\u003eSame material used in Indy Car, NASCAR and F1\u003c\/li\u003e\n\u003cli\u003eNon-invasive install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon thermoplastic front splitter\u003c\/li\u003e\n\u003cli\u003eWill not grab and bend surfaces like aluminum units\u003c\/li\u003e\n\u003cli\u003eWill not crack and break like carbon and ABS units\u003c\/li\u003e\n\u003cli\u003eAbrasion resistant while remaining stiff\u003c\/li\u003e\n\u003cli\u003eCarbon fiber air dam with aircraft nut plates\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eIterative design work extracted more performance from the splitter and air dam combination, sizing the splitter and dive planes to counteract the rear wing and diffuser for a safe, effective aero balance. Part of the Ventus 2 kit for the 987.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0135A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556817170730,"sku":"A0135A","price":2995.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0135A_5D_20Front_20Splitter_20Kit_20-_20Porsche_20Cayman_2C_20987.jpg?v=1789010354"},{"product_id":"dive-plane-canard-kit-porsche-987-cayman","title":"Dive Plane (Canard) Kit - Porsche 987 Cayman","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Verus Engineering Dive Plane (Canard) Kit adds front-end downforce without needing to move the front splitter further forward.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D to extract more performance from the available build volume. Built for owners looking to shift aero balance forward to balance a large rear wing or diffuser.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDive Plane, left-hand\u003c\/li\u003e\n\u003cli\u003eDive Plane, right-hand\u003c\/li\u003e\n\u003cli\u003e3M VHB double-sided tape, cut to dive plane size (2)\u003c\/li\u003e\n\u003cli\u003eTemplate (2)\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces lift \/ increases downforce\u003c\/li\u003e\n\u003cli\u003eShifts aero balance forward\u003c\/li\u003e\n\u003cli\u003eAllows fine tuning of aero balance\u003c\/li\u003e\n\u003cli\u003eHelps seal the sides of the car\u003c\/li\u003e\n\u003cli\u003eEvacuates air from the front of the wheel well\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2x2 twill pre-preg carbon\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eANSYS CFD software was used to improve the kit's performance. In back-to-back testing with GearOnePerformance, Verus recorded an \u003cstrong\u003eincrease in corner speeds of 5–6 MPH from the dive planes alone\u003c\/strong\u003e, with the driver noting a more balanced setup and less understeer through corners.\u003c\/p\u003e\n\u003cp\u003eThe dive planes feature in both the Ventus 1 and Ventus 2 packages for the 987 Cayman. Ventus 2 leans toward a track car but remains usable daily.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0126A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556818121002,"sku":"A0126A","price":429.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0126A_5D_20Dive_20Plane_20_28Canard_29_20Kit_20-_20Porsche_20987_20Cayman.jpg?v=1789010369"},{"product_id":"ucw-rear-wing-kit-987-porsche-cayman","title":"UCW Rear Wing Kit - 987 Porsche Cayman","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eA 250mm chord UCW wing supplied with a carbon ducktail spoiler, dramatically improving rear-end grip at speed on the 987 Cayman. The wing and full aero kit were developed in CFD to improve track performance, and the wing alone can meaningfully reduce lap times.\u003c\/p\u003e\n\u003cp\u003eThe uprights are CNC machined from 6061-T6 aluminum and FEA analyzed to keep strength high and weight minimal. The carbon spoiler installs onto the OE trunk with a multitude of bolts, transferring load through multiple points into the chassis.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUCW Wings are assembled per order and ship within 5 business days of receipt of order unless otherwise specified.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Rear Wing, 250mm UCW\u003c\/li\u003e\n\u003cli\u003eCarbon Endplate (2)\u003c\/li\u003e\n\u003cli\u003eMachined Upright (2)\u003c\/li\u003e\n\u003cli\u003eMachined Rear Wing Mount (2)\u003c\/li\u003e\n\u003cli\u003eCarbon Ducktail Spoiler\u003c\/li\u003e\n\u003cli\u003eDrill template\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all necessary hardware for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD optimized airfoil, highly efficient (great L\/D)\u003c\/li\u003e\n\u003cli\u003e15 total adjustment angles, -1 to 14 degrees\u003c\/li\u003e\n\u003cli\u003eLightweight and high strength\u003c\/li\u003e\n\u003cli\u003eCapable of generating and handling over 400 lbs of downforce at 120 MPH\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon fiber rear wing — 2x2 twill pre-preg carbon, autoclave cured, automotive high-gloss clear\u003c\/li\u003e\n\u003cli\u003eMachined billet aluminum wing mounts\u003c\/li\u003e\n\u003cli\u003e2x2 twill carbon fiber endplates\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe airfoil profile was run through the ANSYS adjoint solver and iteratively improved. The wing was positioned to create a good aero balance with the rest of the Ventus 2 kit, which produces a significant downforce increase over the factory car. Verus CFD data and real-world testing correlate closely.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0428A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNote: installation requires drilling the trunk for the spoiler mounts — a drill template is supplied.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556820414762,"sku":"A0428A","price":3299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0428A_20_281-2_29_5D_20UCW_20Rear_20Wing_20Kit_20-_20987_20Porsche_20Cayman.jpg?v=1789010418"},{"product_id":"side-splitter-kit-porsche-987-cayman","title":"Side Splitter Kit - Porsche 987 Cayman","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Carbon Fiber Side Splitters complete the aerodynamic appearance of the Porsche 987 — designed to look the part and work, with CFD used to confirm on-track performance.\u003c\/p\u003e\n\u003cp\u003eThey help seal high-pressure air from reaching the underside of the car, reducing lift. Constructed from pre-preg carbon fiber for an excellent strength-to-weight ratio, with in-house scan data giving a near-OEM fit and finish.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSide Splitter, left-hand\u003c\/li\u003e\n\u003cli\u003eSide Splitter, right-hand\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces lift\u003c\/li\u003e\n\u003cli\u003eReduces lap times\u003c\/li\u003e\n\u003cli\u003eIncreases gas mileage\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on installation\u003c\/li\u003e\n\u003cli\u003eExotic appearance in automotive matte clear\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD tested\u003c\/li\u003e\n\u003cli\u003e2x2 twill pre-preg carbon construction\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on install\u003c\/li\u003e\n\u003cli\u003eStainless hardware used throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe side splitters improve downforce by reducing spillage of high-pressure air from the top side of the car to the underbody, raising overall vehicle efficiency. The effect is most pronounced when the car is turning or in yaw.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0169A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556821233962,"sku":"A0169A","price":1099.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0169A_5D_20Side_20Splitter_20Kit_20-_20Porsche_20987_20Cayman.jpg?v=1789010434"},{"product_id":"flat-underbody-cover-kit-porsche-987-cayman","title":"Flat Underbody Cover Kit - Porsche 987 Cayman","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eFinishing what Porsche started, this panel fills the void in the 987's underbody. The middle of a car generates drag, and covering those turbulent areas with flat sheet aluminum reduces it significantly. Feeding the rear diffuser less turbulent air also increases the diffuser's ability to create downforce.\u003c\/p\u003e\n\u003cp\u003eProduced from sheet aluminum and powder-coated durable black. Pair with the Verus rear diffuser to reduce lift and drag simultaneously.\u003c\/p\u003e\n\u003cp\u003eCFD estimates the panel reduces the coefficient of drag by \u003cstrong\u003e0.007 — 7 points\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e brackets for both 987.1 and 987.2 are included in the kit.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlat Underbody Panel\u003c\/li\u003e\n\u003cli\u003eBracket, 987.1 (2)\u003c\/li\u003e\n\u003cli\u003eBracket, 987.2 (2)\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces drag\u003c\/li\u003e\n\u003cli\u003eIncreases gas mileage\u003c\/li\u003e\n\u003cli\u003eFlat underbody\u003c\/li\u003e\n\u003cli\u003eSimple install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCNC cut 5052 aluminum, CNC bent for repeatability\u003c\/li\u003e\n\u003cli\u003ePowder-coated black for durability\u003c\/li\u003e\n\u003cli\u003eStainless steel hardware throughout\u003c\/li\u003e\n\u003cli\u003eRivet-nut install tool included\u003c\/li\u003e\n\u003cli\u003eProduced in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe panel covers a large gap between the belly pan and the rear diffuser, decreasing underbody drag and improving the diffuser's ability to function. Part of both the Ventus 1 and Ventus 2 packages for the 987 Cayman.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0137A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556821987626,"sku":"A0137A","price":429.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0137A_5D_20Flat_20Underbody_20Cover_20Kit_20-_20Porsche_20987_20Cayman.jpg?v=1789010448"},{"product_id":"ucw-rear-wing-kit-porsche-991-gt3","title":"UCW Rear Wing Kit - Porsche 991 GT3","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe UCW rear wing significantly increases rear downforce on the 991 GT3, boosting confidence on track and reducing lap times.\u003c\/p\u003e\n\u003cp\u003eVerus developed the UCW to bridge the gap between their swan neck high-efficiency wing and the 300mm V1X airfoil. With a 250mm curved chord it produces more downforce than the high-efficiency wing, and significantly more than similarly sized competitor wings.\u003c\/p\u003e\n\u003cp\u003eThe airfoil was optimized within the available build volume — derived from the V1X — using state-of-the-art analysis software, with CFD confirming the wing receives adequate airflow once installed. In-house scan data gives a near-OEM fit and finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUCW Wings are assembled per order and ship within 5 business days of receipt of order.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Carbon Rear Wing Assembly, 250mm chord\u003c\/li\u003e\n\u003cli\u003e(2) Carbon Endplate\u003c\/li\u003e\n\u003cli\u003e(4) Machined Aluminum Wing Upright\u003c\/li\u003e\n\u003cli\u003e(1) Hardware Kit, including all hardware necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized airfoil using the ANSYS Adjoint Solver\u003c\/li\u003e\n\u003cli\u003eImproved efficiency (L\/D)\u003c\/li\u003e\n\u003cli\u003eIncreased downforce\u003c\/li\u003e\n\u003cli\u003eBolts to the OEM trunk in place of the OEM unit\u003c\/li\u003e\n\u003cli\u003eCapable of generating and withstanding 500+ lbs of downforce\u003c\/li\u003e\n\u003cli\u003eCapable of balancing out significant front aerodynamic systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon fiber rear wing — 2x2 twill pre-preg carbon, autoclave cured, automotive high-gloss clear\u003c\/li\u003e\n\u003cli\u003eMachined billet aluminum uprights and trunk mounts\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe wing generates downforce across a 0 to 15 degree angle of attack range. As part of the Ventus 3 kit it adds significant downforce, reducing lap times and increasing corner speed. Verus CFD data and real-world experimental data correlate closely.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0211A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556830540074,"sku":"A0211A","price":3499.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0211A_5D_20UCW_20Rear_20Wing_20Kit_20-_20Porsche_20991_20GT3.jpg?v=1789010503"},{"product_id":"v1x-rear-wing-kit-porsche-991-1-991-2-gt3rs-and-gt2rs","title":"V1X Rear Wing Kit - Porsche 991.1\/991.2 GT3RS and GT2RS","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eA 300mm chord swan neck wing that dramatically improves rear-end grip at speed. The wing is the main driver of the downforce increase, and paired with the front splitter it turns a GT3 RS into a genuine track weapon.\u003c\/p\u003e\n\u003cp\u003eThe wing was designed, iterated and tested in CFD and a wind tunnel. All mounting was designed from OEM scans and \u003cstrong\u003erequires no permanent modification to the rear hatch\u003c\/strong\u003e. The uprights are CNC machined from 6061-T6 aluminum and FEA analyzed to keep strength high and weight minimal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eV1X Wings are assembled per order and ship within 5 business days of receipt of order unless otherwise specified.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Carbon Rear Wing, 300mm swan neck\u003c\/li\u003e\n\u003cli\u003e(2) Carbon Vented Endplate\u003c\/li\u003e\n\u003cli\u003e(2) Machined 6061 Swan Neck Upright\u003c\/li\u003e\n\u003cli\u003e(2) Machined 6061 Chassis Mount Bracket\u003c\/li\u003e\n\u003cli\u003e(2) Machined Delrin Chassis Stop\u003c\/li\u003e\n\u003cli\u003e(1) Gurney Flap with 3M VHB tape\u003c\/li\u003e\n\u003cli\u003e(1) Hardware Kit, including all hardware necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2x2 twill, 3k, pre-preg carbon fiber, autoclave cured\u003c\/li\u003e\n\u003cli\u003eCarbon inner rib for strength, carbon endplates\u003c\/li\u003e\n\u003cli\u003eWing weighs under 9 lbs\u003c\/li\u003e\n\u003cli\u003eMachined 6061-T6 aluminum mounts and uprights\u003c\/li\u003e\n\u003cli\u003eMilitary spec (NAS) hardware on the wing\u003c\/li\u003e\n\u003cli\u003eZero permanent modifications to the chassis\u003c\/li\u003e\n\u003cli\u003eChassis brace transfers downforce into the chassis\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD optimized airfoil, highly efficient (great L\/D)\u003c\/li\u003e\n\u003cli\u003e15 total adjustment angles, -1 to 14 degrees\u003c\/li\u003e\n\u003cli\u003eCapable of generating and handling over 700 lbs of downforce at 120 MPH\u003c\/li\u003e\n\u003cli\u003eSwan neck design for improved efficiency from the wing element\u003c\/li\u003e\n\u003cli\u003eOEM bolt-on install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe airfoil profile was run through the ANSYS adjoint solver and iteratively improved. The wing was positioned to create a good aero balance with the rest of the Ventus 2 kit, which produces a significant downforce increase over the factory car. Verus CFD data and real-world testing correlate closely.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0230A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 991.1 and 991.2 GT3 RS, and GT2 RS.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556830671146,"sku":"A0230A","price":6999.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0230A_5D_20V1X_20Rear_20Wing_20Kit_20-_20Porsche_20991.1-991.jpg?v=1789010521"},{"product_id":"anti-buffeting-wind-deflectors-porsche-991-1-991-2-gt3-and-gt3rs","title":"Anti-Buffeting Wind Deflectors - Porsche 991.1\/991.2 GT3 and GT3RS","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe wind buffeting these Porsches suffer from with the windows down is a well-known annoyance. Verus heard about it from owners, experienced it themselves on track, and built a fix.\u003c\/p\u003e\n\u003cp\u003eThese deflectors attach easily with 3M VHB double-sided tape. Each is produced from multiple pieces of pre-preg carbon bonded together, then clear coated in an automotive high-gloss finish.\u003c\/p\u003e\n\u003cp\u003eScan data taken in-house ensured the units contour properly to the mirror bases, and CFD confirmed they work as intended without adding unnecessary drag or disrupting other aerodynamic devices downstream.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Wind Deflector, left-hand\u003c\/li\u003e\n\u003cli\u003eCarbon Wind Deflector, right-hand\u003c\/li\u003e\n\u003cli\u003e3M VHB double-sided tape\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAlleviates wind buffeting with the windows down\u003c\/li\u003e\n\u003cli\u003eCarbon construction with a high-gloss finish\u003c\/li\u003e\n\u003cli\u003eSimple installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2x2 twill 3k carbon fiber\u003c\/li\u003e\n\u003cli\u003eTwo-piece design for an excellent fit and finish\u003c\/li\u003e\n\u003cli\u003ePre-preg carbon, autoclave cured\u003c\/li\u003e\n\u003cli\u003eHigh-gloss automotive clear\u003c\/li\u003e\n\u003cli\u003eCFD analyzed to ensure no negative interactions with the rest of the car\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe buffeting comes from airflow around the A-pillar attaching and detaching while the windows are down, building pressure waves in the cabin. These deflectors ensure the airflow detaches cleanly as it passes the windows, stopping the problem at its source.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0240A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 991.1 and 991.2 GT3 and GT3 RS.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556832342314,"sku":"A0240A","price":329.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0240A_5D_20Anti-Buffeting_20Wind_20Deflectors_20-_20Porsche_20991.1-991.jpg?v=1789010537"},{"product_id":"front-splitter-kit-porsche-991-1-gt3","title":"Front Splitter Kit - Porsche 991.1 GT3","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eFront splitters produce front-end downforce without significantly increasing drag, by creating a large pressure delta between their top and bottom surfaces. This one was sized against the rear wing to hold a proper aero balance and reduce lap times.\u003c\/p\u003e\n\u003cp\u003eThe splitter is produced from carbon thermoplastic, the same material used in top-tier motorsport. It isn't brittle, so no cracking like carbon fiber or ABS, and it won't grab and bend under the car like aluminum. It abrades and takes a beating without losing performance or appearance.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Carbon Composite Splitter, left-hand\u003c\/li\u003e\n\u003cli\u003e(1) Carbon Composite Splitter, right-hand\u003c\/li\u003e\n\u003cli\u003e(11 pieces) Sheet Metal Bracket Kit\u003c\/li\u003e\n\u003cli\u003e(1) Cross Brace Beam\u003c\/li\u003e\n\u003cli\u003e(2) Splitter Tie\u003c\/li\u003e\n\u003cli\u003e(4) Machined Clevis\u003c\/li\u003e\n\u003cli\u003e(1) Hardware Kit including all necessary bolts, nuts and washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGreatly increases front-end downforce\u003c\/li\u003e\n\u003cli\u003eProduces high downforce suitable for large rear wings\u003c\/li\u003e\n\u003cli\u003eCapable of handling 300+ lbs\u003c\/li\u003e\n\u003cli\u003eCarbon thermoplastic construction — strength, low weight, durability and appearance\u003c\/li\u003e\n\u003cli\u003eSame material used in Indy Car, NASCAR and F1\u003c\/li\u003e\n\u003cli\u003eNon-invasive, easy install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon thermoplastic front splitter\u003c\/li\u003e\n\u003cli\u003eWill not grab and bend surfaces like aluminum units\u003c\/li\u003e\n\u003cli\u003eWill not crack and break like carbon and ABS units\u003c\/li\u003e\n\u003cli\u003eAbrasion resistant while remaining stiff\u003c\/li\u003e\n\u003cli\u003eCNC cut and bent brackets\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe splitter was sized specifically for the UCW rear wing blade upgrade Verus designed for the GT3, giving a safe, effective aero balance. Part of the Ventus 3 kit for the 991 GT3, which boosts downforce significantly over factory while keeping the car street-usable through reasonable splitter protrusion and wing widths.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0244A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 991.1 GT3 only.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556837552426,"sku":"A0244A","price":3599.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0244A_5D_20Front_20Splitter_20Kit_20-_20Porsche_20991.jpg?v=1789010594"},{"product_id":"oem-wing-riser-kit-porsche-991-gt3","title":"OEM Wing Riser Kit - Porsche 991 GT3","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe OEM Wing Riser Kit improves the performance of the factory rear wing while also improving visibility out of the rear window — more rear downforce and a rear view mirror that actually works.\u003c\/p\u003e\n\u003cp\u003eThe risers are produced in-house on 5-axis CNC mills from 6061-T6 aluminum. In-house scan data shaped them to follow the factory Porsche body lines, and they bolt on like an OEM piece.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThey raise the rear wing by 73mm.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoose black or raw finish.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Left Wing Riser\u003c\/li\u003e\n\u003cli\u003e(1) Right Wing Riser\u003c\/li\u003e\n\u003cli\u003e(4) 3D Printed Hardware Cover\u003c\/li\u003e\n\u003cli\u003e(1) Hardware Kit, including all necessary hardware for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncreases downforce generated by the OEM wing\u003c\/li\u003e\n\u003cli\u003eImproved overall aerodynamic efficiency\u003c\/li\u003e\n\u003cli\u003eBetter high-speed stability\u003c\/li\u003e\n\u003cli\u003eReduces lap times\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD designed and tested\u003c\/li\u003e\n\u003cli\u003e6061-T6 machined construction\u003c\/li\u003e\n\u003cli\u003eCNC cut in-house in the USA\u003c\/li\u003e\n\u003cli\u003eStainless hardware used throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe OEM wing has a few degrees of adjustment. These risers extend the angle of attack range beyond what the factory allows, increasing downforce past what the OEM wing alone can produce. Raising the wing slightly also improves airflow underneath it, further improving the factory wing's efficiency. Verus verified the gain through internal CFD runs against the OEM setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Numbers:\u003c\/strong\u003e A0444A-BLK (black) \/ A0444A-RAW (raw)\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 991.1 and 991.2 GT3.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Black","offer_id":52556837749034,"sku":"A0444A-BLK","price":1049.95,"currency_code":"USD","in_stock":true},{"title":"Raw","offer_id":52556837781802,"sku":"A0444A-RAW","price":1049.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0444A-BLK_5D_20OEM_20Wing_20Riser_20Kit_20-_20Porsche_20991_20GT3_20_28Black_29.jpg?v=1789010611"},{"product_id":"dive-plane-kit-dual-element-porsche-991-1-gt3-gt3rs","title":"Dive Plane Kit, Dual Element - Porsche 991.1 GT3\/GT3RS","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThese dive planes increase front-end downforce, feed more high-pressure airflow to the factory intake duct, and keep the drag increase minimal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVerus has measured gains of up to 0.7 seconds\u003c\/strong\u003e from the increased front grip in high-speed corners. Depending on driver preference, no rear aero is needed to balance them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAn honest caveat from Verus:\u003c\/strong\u003e if you already feel the car needs more rear stability, they don't recommend fitting these without adding a rear aerodynamic device.\u003c\/p\u003e\n\u003cp\u003eDesigned in CAD from scan data and optimized using CFD in ANSYS Fluent. Construction is 1.5mm thick pre-preg, autoclave cured, 2x2 twill carbon. \u003cstrong\u003eChoose gloss or matte clear.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Dive Plane, upper left\u003c\/li\u003e\n\u003cli\u003e(1) Dive Plane, lower left\u003c\/li\u003e\n\u003cli\u003e(1) Dive Plane, upper right\u003c\/li\u003e\n\u003cli\u003e(1) Dive Plane, lower right\u003c\/li\u003e\n\u003cli\u003e(1) Install template\u003c\/li\u003e\n\u003cli\u003e(4 pieces) 3M VHB tape, one per dive plane\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD optimized for improved performance\u003c\/li\u003e\n\u003cli\u003eShifts aero balance forward, improving front-end grip\u003c\/li\u003e\n\u003cli\u003eAllows fine tuning of aero balance\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on or double-sided tape installation with templates included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2x2 weave, autoclave cured, 1.5mm thick carbon fiber\u003c\/li\u003e\n\u003cli\u003eMatte and gloss UV resistant automotive grade clear\u003c\/li\u003e\n\u003cli\u003e3M VHB double-sided tape, cut to dive plane sizes\u003c\/li\u003e\n\u003cli\u003eTemplates to aid installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eDive planes shift aerodynamic balance forward without needing a larger front splitter, which can make a car impractical on the street. This kit also feeds the intake ducts clean, high-pressure air, which Verus states builds positive pressure in the intake at speed while ensuring the coldest possible air reaches the filter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Numbers:\u003c\/strong\u003e A0238A-P (gloss clear) \/ A0238A-M (matte clear)\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 991.1 GT3 and GT3 RS.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Gloss Clear","offer_id":52556839059754,"sku":"A0238A-P","price":1099.95,"currency_code":"USD","in_stock":true},{"title":"Matte Clear","offer_id":52556839092522,"sku":"A0238A-M","price":1099.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0238A-P_5D_20Dive_20Plane_20Kit_2C_20Dual_20Element_20-_20Porsche_20991.jpg?v=1789010629"},{"product_id":"front-splitter-kit-porsche-991-2-gt3","title":"Front Splitter Kit - Porsche 991.2 GT3","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eFront splitters produce front-end downforce without significantly increasing drag, by creating a large pressure delta between their top and bottom surfaces. This one was sized against the rear wing to hold a proper aero balance and reduce lap times.\u003c\/p\u003e\n\u003cp\u003eThe splitter is produced from carbon thermoplastic, the same material used in top-tier motorsport. It isn't brittle, so no cracking like carbon fiber or ABS, and it won't grab and bend under the car like aluminum. It abrades and takes a beating without losing performance or appearance.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Carbon Composite Splitter, left-hand\u003c\/li\u003e\n\u003cli\u003e(1) Carbon Composite Splitter, right-hand\u003c\/li\u003e\n\u003cli\u003e(11 pieces) Sheet Metal Bracket Kit\u003c\/li\u003e\n\u003cli\u003e(1) Cross Brace Beam\u003c\/li\u003e\n\u003cli\u003e(2) Splitter Tie\u003c\/li\u003e\n\u003cli\u003e(4) Machined Clevis\u003c\/li\u003e\n\u003cli\u003e(1) Hardware Kit including all necessary bolts, nuts and washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGreatly increases front-end downforce\u003c\/li\u003e\n\u003cli\u003eProduces high downforce suitable for large rear wings\u003c\/li\u003e\n\u003cli\u003eCapable of handling 300+ lbs\u003c\/li\u003e\n\u003cli\u003eCarbon thermoplastic construction — strength, low weight, durability and appearance\u003c\/li\u003e\n\u003cli\u003eSame material used in Indy Car, NASCAR and F1\u003c\/li\u003e\n\u003cli\u003eNon-invasive, easy install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon thermoplastic front splitter\u003c\/li\u003e\n\u003cli\u003eWill not grab and bend surfaces like aluminum units\u003c\/li\u003e\n\u003cli\u003eWill not crack and break like carbon and ABS units\u003c\/li\u003e\n\u003cli\u003eAbrasion resistant while remaining stiff\u003c\/li\u003e\n\u003cli\u003eCNC cut and bent brackets\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eSized specifically for the UCW rear wing blade upgrade Verus designed for the GT3, giving a safe, effective aero balance. Part of the Ventus 3 kit for the 991 GT3.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0213A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 991.2 GT3 only — not the 991.1, and not the GT3 RS.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556842238250,"sku":"A0213A","price":3599.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0213A_5D_20Front_20Splitter_20Kit_20-_20Porsche_20991.jpg?v=1789010701"},{"product_id":"front-splitter-kit-porsche-991-1-gt3rs","title":"Front Splitter Kit - Porsche 991.1 GT3RS","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eFront splitters produce front-end downforce without significantly increasing drag, by creating a large pressure delta between their top and bottom surfaces. This RS kit goes further than the standard GT3 splitter, adding carbon splitter diffusers and grind strakes to work the underbody harder.\u003c\/p\u003e\n\u003cp\u003eThe splitter is produced from carbon polyweave, the same material used in top-tier motorsport. It isn't brittle, so no cracking like carbon fiber or ABS, and it won't grab and bend under the car like aluminum.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Polyweave Splitter (1)\u003c\/li\u003e\n\u003cli\u003ePolyweave Grind Strake (4)\u003c\/li\u003e\n\u003cli\u003eCarbon Splitter Diffuser (2)\u003c\/li\u003e\n\u003cli\u003eSheet Aluminum Diffuser Block Off (2)\u003c\/li\u003e\n\u003cli\u003eSheet Metal Bracket Kit (13 pieces)\u003c\/li\u003e\n\u003cli\u003eSteel Cross Beam Tube (1)\u003c\/li\u003e\n\u003cli\u003eClevis (4)\u003c\/li\u003e\n\u003cli\u003eSplitter Support Rod Assembly (2)\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGreatly increases front-end downforce\u003c\/li\u003e\n\u003cli\u003eProduces high downforce suitable for large rear wings\u003c\/li\u003e\n\u003cli\u003eCapable of handling 300+ lbs\u003c\/li\u003e\n\u003cli\u003eCarbon polyweave construction — strength, low weight, durability and appearance\u003c\/li\u003e\n\u003cli\u003eSame material used in Indy Car, NASCAR and F1\u003c\/li\u003e\n\u003cli\u003eIntegrated splitter diffusers and grind strakes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon polyweave front splitter\u003c\/li\u003e\n\u003cli\u003eWill not grab and bend surfaces like aluminum units\u003c\/li\u003e\n\u003cli\u003eWill not crack and break like carbon and ABS units\u003c\/li\u003e\n\u003cli\u003eAbrasion resistant while remaining stiff\u003c\/li\u003e\n\u003cli\u003eCNC cut and bent brackets\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eSized to counteract the rear wing and diffuser for a safe, effective aero balance — an unbalanced car is considerably harder to drive at the limit. Designed to pair with the V1X Swan Neck Rear Wing on the RS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0243A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 991.1 GT3 RS only — not the 991.2 RS, and not the standard GT3.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556843319594,"sku":"A0243A","price":4999.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0243A_5D_20Front_20Splitter_20Kit_20-_20Porsche_20991.jpg?v=1789010718"},{"product_id":"front-splitter-kit-porsche-991-2-gt3rs","title":"Front Splitter Kit - Porsche 991.2 GT3RS","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eFront splitters produce front-end downforce without significantly increasing drag, by creating a large pressure delta between their top and bottom surfaces. This RS kit adds carbon splitter diffusers and grind strakes to work the underbody harder than the standard GT3 splitter.\u003c\/p\u003e\n\u003cp\u003eThe splitter is produced from carbon polyweave, the same material used in top-tier motorsport. It isn't brittle, so no cracking like carbon fiber or ABS, and it won't grab and bend under the car like aluminum.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Polyweave Splitter (1)\u003c\/li\u003e\n\u003cli\u003ePolyweave Grind Strake (4)\u003c\/li\u003e\n\u003cli\u003eCarbon Splitter Diffuser (2)\u003c\/li\u003e\n\u003cli\u003eSheet Aluminum Diffuser Block Off (2)\u003c\/li\u003e\n\u003cli\u003eSheet Metal Bracket Kit (13 pieces)\u003c\/li\u003e\n\u003cli\u003eSteel Cross Beam Tube (1)\u003c\/li\u003e\n\u003cli\u003eClevis (4)\u003c\/li\u003e\n\u003cli\u003eSplitter Support Rod Assembly (2)\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGreatly increases front-end downforce\u003c\/li\u003e\n\u003cli\u003eProduces high downforce suitable for large rear wings\u003c\/li\u003e\n\u003cli\u003eCapable of handling 300+ lbs\u003c\/li\u003e\n\u003cli\u003eCarbon polyweave construction — strength, low weight, durability and appearance\u003c\/li\u003e\n\u003cli\u003eSame material used in Indy Car, NASCAR and F1\u003c\/li\u003e\n\u003cli\u003eIntegrated splitter diffusers and grind strakes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon polyweave front splitter\u003c\/li\u003e\n\u003cli\u003eWill not grab and bend surfaces like aluminum units\u003c\/li\u003e\n\u003cli\u003eWill not crack and break like carbon and ABS units\u003c\/li\u003e\n\u003cli\u003eAbrasion resistant while remaining stiff\u003c\/li\u003e\n\u003cli\u003eCNC cut and bent brackets\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eSized to counteract the rear wing and diffuser for a safe, effective aero balance — an unbalanced car is considerably harder to drive at the limit. Designed to pair with the V1X Swan Neck Rear Wing on the RS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0219A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 991.2 GT3 RS only — not the 991.1 RS, and not the standard GT3.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556845187370,"sku":"A0219A","price":4999.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0219A_5D_20Front_20Splitter_20Kit_20-_20Porsche_20991.jpg?v=1789010734"},{"product_id":"dive-plane-kit-dual-element-porsche-991-2-gt3-gt3rs","title":"Dive Plane Kit, Dual Element - Porsche 991.2 GT3\/GT3RS","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThese dive planes increase front-end downforce, feed more high-pressure airflow to the factory intake duct, and keep the drag increase minimal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVerus has measured gains of up to 0.7 seconds\u003c\/strong\u003e from the increased front grip in high-speed corners. Depending on driver preference, no rear aero is needed to balance them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAn honest caveat from Verus:\u003c\/strong\u003e if you already feel the car needs more rear stability, they don't recommend fitting these without adding a rear aerodynamic device.\u003c\/p\u003e\n\u003cp\u003eDesigned in CAD from scan data and optimized using CFD in ANSYS Fluent. Construction is 1.5mm thick pre-preg, autoclave cured, 2x2 twill carbon. \u003cstrong\u003eChoose gloss or matte clear.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Dive Plane, upper left\u003c\/li\u003e\n\u003cli\u003e(1) Dive Plane, lower left\u003c\/li\u003e\n\u003cli\u003e(1) Dive Plane, upper right\u003c\/li\u003e\n\u003cli\u003e(1) Dive Plane, lower right\u003c\/li\u003e\n\u003cli\u003e(1) Install template\u003c\/li\u003e\n\u003cli\u003e(4 pieces) 3M VHB tape, one per dive plane\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD optimized for improved performance\u003c\/li\u003e\n\u003cli\u003eShifts aero balance forward, improving front-end grip\u003c\/li\u003e\n\u003cli\u003eAllows fine tuning of aero balance\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on or double-sided tape installation with templates included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2x2 weave, autoclave cured, 1.5mm thick carbon fiber\u003c\/li\u003e\n\u003cli\u003eMatte and gloss UV resistant automotive grade clear\u003c\/li\u003e\n\u003cli\u003e3M VHB double-sided tape, cut to dive plane sizes\u003c\/li\u003e\n\u003cli\u003eTemplates to aid installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eDive planes shift aerodynamic balance forward without needing a larger front splitter, which can make a car impractical on the street. This kit also feeds the intake ducts clean, high-pressure air, which Verus states builds positive pressure in the intake at speed while ensuring the coldest possible air reaches the filter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Numbers:\u003c\/strong\u003e A0208A-P (gloss clear) \/ A0208A-M (matte clear)\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 991.2 GT3 and GT3 RS.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Gloss Clear","offer_id":52556846432554,"sku":"A0208A-P","price":1099.95,"currency_code":"USD","in_stock":true},{"title":"Matte Clear","offer_id":52556846465322,"sku":"A0208A-M","price":1099.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0208A-P_5D_20Dive_20Plane_20Kit_2C_20Dual_20Element_20-_20Porsche_20991.jpg?v=1789010753"},{"product_id":"ucw-rear-wing-kit-porsche-992-gt3","title":"UCW Rear Wing Kit - Porsche 992 GT3","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe UCW Rear Wing significantly increases rear downforce on the 992 GT3, boosting confidence on track and reducing lap times. It bolts on exactly like the factory wing — \u003cstrong\u003ea sub-20-minute install\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe airfoil was optimized within the available build volume — derived from the V1X — using state-of-the-art analysis software, with CFD confirming the wing receives adequate airflow at various angles of attack once installed. In-house scan data gives an OEM fit and finish.\u003c\/p\u003e\n\u003cp\u003eSuited to the track driver or street enthusiast needing a large increase in rear downforce to balance a significant front aero package.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUCW Wings are assembled per order and ship within 5 business days of receipt of order unless otherwise specified.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Rear Wing Element Assembly\u003c\/li\u003e\n\u003cli\u003e(2) Rear Wing Carbon Endplate\u003c\/li\u003e\n\u003cli\u003e(1) Hardware Kit, including all parts necessary for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized airfoil using the ANSYS Adjoint Solver\u003c\/li\u003e\n\u003cli\u003eImproved efficiency (L\/D)\u003c\/li\u003e\n\u003cli\u003eIncreased downforce\u003c\/li\u003e\n\u003cli\u003eBolts on in place of the OEM wing blade\u003c\/li\u003e\n\u003cli\u003eCapable of balancing out significant front aerodynamic systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon fiber rear wing — 2x2 twill pre-preg carbon, autoclave cured, automotive high-gloss clear\u003c\/li\u003e\n\u003cli\u003e2x2 twill carbon fiber endplates\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0425A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556851839274,"sku":"A0425A","price":3599.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0425A_5D_20UCW_20Rear_20Wing_20Kit_20-_20Porsche_20_20992_20GT3.jpg?v=1789010843"},{"product_id":"front-splitter-kit-porsche-992-gt3","title":"Front Splitter Kit - Porsche 992 GT3","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eFront splitters produce front-end downforce without significantly increasing drag, by creating a large pressure delta between their top and bottom surfaces. This one adds design tweaks to the splitter's underside to improve flow with the carbon polyweave blades, with CFD used to confirm an appropriate aero balance for on-track performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe splitter installs with absolutely no cutting or permanent modification to the car.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt's produced from carbon thermoplastic, the same material used in top-tier motorsport. It isn't brittle, so no cracking like carbon fiber or ABS, and it won't grab and bend under the car like aluminum. The polyweave abrades away and takes a considerable beating.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Front Splitter Blade, left-hand and right-hand\u003c\/li\u003e\n\u003cli\u003e(1) Bracket Kit\u003c\/li\u003e\n\u003cli\u003e(2) Chassis Mount\u003c\/li\u003e\n\u003cli\u003e(1) Leading Edge Mount\u003c\/li\u003e\n\u003cli\u003e(1) Tube Kit\u003c\/li\u003e\n\u003cli\u003e(1) Cross Beam\u003c\/li\u003e\n\u003cli\u003e(2) Outer Support Beam\u003c\/li\u003e\n\u003cli\u003e(1) Hardware Kit, including all necessary hardware for a seamless install — stainless for the vast majority\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGreatly increases front-end downforce\u003c\/li\u003e\n\u003cli\u003eProduces high downforce suitable for large rear wings\u003c\/li\u003e\n\u003cli\u003eNo cutting or permanent modification required\u003c\/li\u003e\n\u003cli\u003eCarbon thermoplastic construction — strength, low weight, durability and appearance\u003c\/li\u003e\n\u003cli\u003eSame material used in Indy Car, NASCAR and F1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon polyweave front splitter\u003c\/li\u003e\n\u003cli\u003eWill not grab and bend surfaces like aluminum units\u003c\/li\u003e\n\u003cli\u003eWill not crack and break like carbon and ABS units\u003c\/li\u003e\n\u003cli\u003eAbrasion resistant while remaining stiff\u003c\/li\u003e\n\u003cli\u003eCNC cut and bent brackets\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eSized against the rear wing and diffuser for a safe, effective aero balance — an unbalanced car is considerably harder to drive at the limit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0426A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556855771434,"sku":"A0426A","price":3899.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0426A_5D_20Front_20Splitter_20Kit_20-_20Porsche_20992_20GT3.jpg?v=1789010860"},{"product_id":"increased-aoa-kit-for-oem-wing-porsche-992-gt3","title":"Increased AOA Kit for OEM Wing - Porsche 992 GT3","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Increased AOA (Angle of Attack) Mount Kit replaces the factory wing mounts and allows a wider range of angles from the OEM wing blade. That means more rear downforce from the wing already on the car, while keeping OEM adjustment, OEM looks and OEM feel.\u003c\/p\u003e\n\u003cp\u003eThe mounts bolt onto the carbon wing exactly like the factory units, and are produced in-house on 5-axis CNC mills from 6061-T6 aluminum.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software confirmed the performance gain from the increased angle of attack, and in-house scan data shaped the mounts to follow Porsche's design language.\u003c\/p\u003e\n\u003cp\u003eA good option for owners who feel the car wants a slight increase in rear downforce to settle it at speed, or as part of the Ventus 1 package.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLeft Mount\u003c\/li\u003e\n\u003cli\u003eRight Mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncreases downforce generated by the OEM wing\u003c\/li\u003e\n\u003cli\u003eRetains OEM adjustment, appearance and feel\u003c\/li\u003e\n\u003cli\u003eBolts on like a factory piece\u003c\/li\u003e\n\u003cli\u003eImproved high-speed stability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e6061-T6 machined construction\u003c\/li\u003e\n\u003cli\u003eCNC cut in-house in the USA on 5-axis mills\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0443A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUses your existing OEM wing blade — this kit replaces the mounts only.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556856656170,"sku":"A0443A","price":829.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0443A_5D_20Increased_20AOA_C2_A0Kit_C2_A0for_20OEM_20Wing-_20Porsche_20992_20GT3.jpg?v=1789010875"},{"product_id":"carbon-radiator-duct-gurney-porsche-992-gt3","title":"Carbon Radiator Duct Gurney - Porsche 992 GT3","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe radiator gurneys improve front-end downforce and cooling system efficiency at the same time. They work by creating high pressure ahead of the duct and low pressure behind it, improving flow rate through the ducting and radiator.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software confirmed the gurney flaps improve performance. In-house scan data shaped the carbon units to follow the factory Porsche outlet ducts, and CFD simulated radiator flow and ducting to accurately model what they do on the car.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRadiator Gurney Flap, left-hand side\u003c\/li\u003e\n\u003cli\u003eRadiator Gurney Flap, right-hand side\u003c\/li\u003e\n\u003cli\u003e3M tape\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eImproves front-end downforce\u003c\/li\u003e\n\u003cli\u003eImproves cooling system efficiency through better radiator flow rate\u003c\/li\u003e\n\u003cli\u003eFollows the factory outlet duct lines\u003c\/li\u003e\n\u003cli\u003eSimple tape-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePre-preg carbon fiber construction\u003c\/li\u003e\n\u003cli\u003e3M VHB tape supplied\u003c\/li\u003e\n\u003cli\u003eCFD developed with simulated radiator and duct flow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0447A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556861178154,"sku":"A0447A","price":549.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0447A_5D_20Carbon_20Radiator_20Duct_20Gurney_20-_20Porsche_20992_20GT3.jpg?v=1789010954"},{"product_id":"anti-buffeting-wind-deflectors-porsche-992","title":"Anti-Buffeting Wind Deflectors - Porsche 992","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eA must-have for any 992 owner. The sub-woofer-like booming when you roll the windows down is mitigated by these simple add-ons — good for track use or just enjoying the car with the windows open.\u003c\/p\u003e\n\u003cp\u003eThe deflectors attach easily with 3M VHB double-sided tape. Each is produced from multiple pieces of pre-preg carbon bonded together, then clear coated in an automotive high-gloss finish.\u003c\/p\u003e\n\u003cp\u003eScan data taken in-house ensured the units contour properly to the mirror bases, and CFD confirmed they don't add unnecessary drag or disrupt other aerodynamic devices downstream.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Wind Deflector, left-hand\u003c\/li\u003e\n\u003cli\u003eCarbon Wind Deflector, right-hand\u003c\/li\u003e\n\u003cli\u003e3M VHB double-sided tape\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAlleviates wind buffeting with the windows down\u003c\/li\u003e\n\u003cli\u003eCarbon construction with a high-gloss finish\u003c\/li\u003e\n\u003cli\u003eSimple installation, no tools required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2x2 twill 3k carbon fiber\u003c\/li\u003e\n\u003cli\u003eMulti-piece bonded design for an excellent fit and finish\u003c\/li\u003e\n\u003cli\u003ePre-preg carbon, autoclave cured\u003c\/li\u003e\n\u003cli\u003eHigh-gloss automotive clear\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe buffeting comes from airflow around the A-pillar attaching and detaching while the windows are down, building pressure waves in the cabin. These deflectors ensure the airflow detaches cleanly as it passes the windows, stopping the problem at its source.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0446A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits the Porsche 992 range.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556861702442,"sku":"A0446A","price":329.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0446A_5D_20Anti-Buffeting_20Wind_20Deflectors_20-_20Porsche_20992.jpg?v=1789010967"},{"product_id":"dive-plane-kit-dual-elements-porsche-992-gt3","title":"Dive Plane Kit, Dual Elements - Porsche 992 GT3","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThese dive planes increase front-end downforce, feed more high-pressure airflow to the factory intake ducting, and keep the drag increase minimal.\u003c\/p\u003e\n\u003cp\u003eDesigned in CAD from in-house scan data and optimized using CFD. Construction is pre-preg, autoclave cured, 2x2 twill carbon with an automotive clear finish, and they install with 3M VHB tape using the supplied templates.\u003c\/p\u003e\n\u003cp\u003eDive planes shift aero balance forward, which helps balance a large rear wing or diffuser and adds front grip on track.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDive Plane, upper left\u003c\/li\u003e\n\u003cli\u003eDive Plane, lower left\u003c\/li\u003e\n\u003cli\u003eDive Plane, upper right\u003c\/li\u003e\n\u003cli\u003eDive Plane, lower right\u003c\/li\u003e\n\u003cli\u003eInstall template\u003c\/li\u003e\n\u003cli\u003e3M VHB tape, cut to dive plane sizes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD optimized for improved performance\u003c\/li\u003e\n\u003cli\u003eShifts aero balance forward, improving front-end grip\u003c\/li\u003e\n\u003cli\u003eAllows fine tuning of aero balance\u003c\/li\u003e\n\u003cli\u003eSimple double-sided tape installation with templates included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2x2 weave, autoclave cured carbon fiber\u003c\/li\u003e\n\u003cli\u003eUV resistant automotive grade clear\u003c\/li\u003e\n\u003cli\u003e3M VHB double-sided tape, cut to dive plane sizes\u003c\/li\u003e\n\u003cli\u003eTemplates to aid installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eDive planes tune aerodynamic balance forward without needing a larger front splitter, which can make a car impractical on the street. Part of the Ventus 1 package for the 992 GT3.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0427A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556862390570,"sku":"A0427A","price":1099.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0427A_5D_20Dive_20Plane_20Kit_2C_20Dual_20Elements_20-_20Porsche_20992_20GT3.jpg?v=1789010983"},{"product_id":"ventus-1-package-porsche-992-gt3","title":"Ventus 1 Package - Porsche 992 GT3","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Ventus 1 package is an entry-level aerodynamic kit for the 992 GT3, increasing downforce and reducing lap times in a safe, predictable way.\u003c\/p\u003e\n\u003cp\u003eThe dive planes improve front-end downforce by generating downforce on the units themselves and improving front fender evacuation. The radiator gurneys add further front downforce while improving cooling of the factory radiator. To balance those front-end gains, the kit includes wing mounts that increase the angle of attack of the factory rear wing.\u003c\/p\u003e\n\u003cp\u003eEvery component was developed with in-house scan data, CAD and CFD analysis, giving an OEM-like fit and finish.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Radiator Outlet Gurney\u003c\/li\u003e\n\u003cli\u003e(1) Dual Element Dive Planes\u003c\/li\u003e\n\u003cli\u003e(1) Upgraded Factory Wing Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSafe, balanced aero gain front and rear\u003c\/li\u003e\n\u003cli\u003eImproved efficiency (L\/D) over the factory car\u003c\/li\u003e\n\u003cli\u003eImproved cooling alongside the aerodynamic gain\u003c\/li\u003e\n\u003cli\u003eRetains the factory wing blade and OEM appearance\u003c\/li\u003e\n\u003cli\u003eNo permanent modification to the car\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDive planes and radiator gurneys — 2x2 twill pre-preg carbon, autoclave cured\u003c\/li\u003e\n\u003cli\u003eWing mounts — 6061-T6 aluminum, CNC machined in-house\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout, with all necessary templates for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eA little front downforce from the dive planes and gurneys, balanced by more angle of attack at the rear, improves aerodynamic performance while keeping a near-stock appearance. A sensible first step before committing to a full wing and splitter package.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0706A-V1\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556863111466,"sku":"A0706A-V1","price":2299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0706A-V1_5D_20Ventus_201_20Package_C2_A0-_20Porsche_20992_20GT3.jpg?v=1789010999"},{"product_id":"csf-aluminum-side-radiator-porsche-991-2-718-gt3-gt4","title":"CSF Aluminum Side Radiator - Porsche 991.2 \/ 718 \/ GT3 \/ GT4","description":"\u003ch3\u003eCSF Aluminum Side Radiators — Porsche 991.2 \/ 718 \/ GT3 \/ GT4\u003c\/h3\u003e\n\u003cp\u003eAll-aluminum side radiators covering a broad range of Porsche GT and Carrera models: 991.2 Carrera, GT3, GT3 RS, GT3 R, 991 GT2 and GT2 RS, plus 718 Boxster, Cayman and GT4.\u003c\/p\u003e\n\u003ch3\u003e⚠ Left and Right Are Separate Parts\u003c\/h3\u003e\n\u003cp\u003eThese are \u003cstrong\u003eside-specific\u003c\/strong\u003e and sold individually. Most cars use both — select the side you need, or order one of each for a full set.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eDirect fit, no modification required.\u003c\/em\u003e\u003c\/p\u003e","brand":"CSF","offers":[{"title":"Left","offer_id":52607766659370,"sku":"csf7086","price":685.0,"currency_code":"USD","in_stock":true},{"title":"Right","offer_id":52607766692138,"sku":"csf7087","price":685.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/846f33df09566834eaabf06dc9155436.png?v=1789448503"},{"product_id":"csf-side-radiator-porsche-911-carrera-991-1-boxster-981-gt4","title":"CSF Side Radiator - Porsche 911 Carrera (991.1) \/ Boxster (981) \/ GT4","description":"\u003ch3\u003eCSF Side Radiators — Porsche 911 Carrera (991.1) \/ Boxster (981) \/ GT4 (991)\u003c\/h3\u003e\n\u003cp\u003eAll-aluminum side radiators for the 991.1 Carrera, 981 Boxster and 991 GT4.\u003c\/p\u003e\n\u003ch3\u003e⚠ Left and Right Are Separate Parts\u003c\/h3\u003e\n\u003cp\u003eThese are \u003cstrong\u003eside-specific\u003c\/strong\u003e and sold individually. Select the side you need, or order one of each for a full set.\u003c\/p\u003e","brand":"CSF","offers":[{"title":"Left","offer_id":52607772295466,"sku":"csf7066","price":575.0,"currency_code":"USD","in_stock":true},{"title":"Right","offer_id":52607772328234,"sku":"csf7067","price":575.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/787983d346291505f976371148a4b889L.jpg?v=1789448503"},{"product_id":"csf-center-radiator-porsche-911-turbo-gt3-rs-gt4-991","title":"CSF Center Radiator - Porsche 911 Turbo \/ GT3 RS \/ GT4 (991)","description":"\u003ch3\u003eCSF Center Radiator — Porsche 911 Turbo \/ GT3 RS \/ GT4 (991)\u003c\/h3\u003e\n\u003cp\u003eAll-aluminum center radiator for the 991-generation 911 Turbo, GT3 RS and GT4. Complements the side radiators as part of the full three-radiator cooling package.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eDirect fit, no modification required.\u003c\/em\u003e\u003c\/p\u003e","brand":"CSF","offers":[{"title":"Default Title","offer_id":52607773278506,"sku":"csf7068","price":629.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/64a79f5ecec058bdc9360bba98e50594L.jpg?v=1789448503"},{"product_id":"csf-auxiliary-center-radiator-porsche-cayman-boxster-carrera-991-981","title":"CSF Auxiliary Center Radiator - Porsche Cayman \/ Boxster \/ Carrera (991\/981)","description":"\u003ch3\u003eCSF Auxiliary Center Radiator — Porsche Cayman \/ Boxster \/ Carrera (991\/981)\u003c\/h3\u003e\n\u003cp\u003eAuxiliary center radiator for the 991 and 981 Porsche range, adding cooling capacity beyond the standard side radiators.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eDirect fit, no modification required.\u003c\/em\u003e\u003c\/p\u003e","brand":"CSF","offers":[{"title":"Default Title","offer_id":52607784616234,"sku":"csf7060","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/ff2bfbb228add966d1c22e8cea1d444eL.jpg?v=1789448503"},{"product_id":"spl-parts-front-lower-control-arms-flca-porsche-991-981-982","title":"SPL Parts Front Lower Control Arms (FLCA) - Porsche 991 \/ 981 \/ 982","description":"\u003ch3\u003eSPL Parts Front Lower Control Arms (FLCA) — Porsche 991 \/ 981 \/ 982\u003c\/h3\u003e\n\u003cp\u003eSignificantly improves front mechanical grip, provides greater stability under hard braking, and precise steering feel. PTFE-lined, F1-fit FK USA spherical bushings eliminate OEM rubber bushing deflection and bind, allowing the suspension to freely articulate without undampened rubber spring forces — preventing camber loss, bumpsteer, and vague feedback.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 991 Carrera\/Turbo, 981\/982 Boxster and Cayman.\u003c\/em\u003e\u003c\/p\u003e","brand":"SPL Parts","offers":[{"title":"Default Title","offer_id":52621757907242,"sku":"SPL-FLCA-981","price":1299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/SPL-FLCA-981-V2-L1-0-Front-Lower-Control-Arms-HiRes__27156.1768428187.jpg?v=1789570972"},{"product_id":"spl-parts-front-lower-control-arm-kit-flcak-porsche-981-982-991","title":"SPL Parts Front Lower Control Arm Kit (FLCAK) - Porsche 981\/982\/991","description":"\u003ch3\u003eSPL Parts Front Lower Control Arm Kit (FLCAK) — Porsche 981\/982 \/ 991\u003c\/h3\u003e\n\u003cp\u003eSignificantly improves front mechanical grip, provides greater stability under hard braking, and precise steering feel. PTFE-lined, F1-fit FK USA spherical bushings eliminate OEM rubber bushing deflection and bind, allowing the suspension to freely articulate without undampened rubber spring forces — preventing camber loss, bumpsteer, and vague feedback.\u003c\/p\u003e\n\u003ch3\u003eKit vs Standalone Arms\u003c\/h3\u003e\n\u003cp\u003eThis is the complete kit version, including additional trailing arm components beyond the standalone Front Lower Control Arms listing — for the full front-end setup rather than just the lower arm.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 981\/982 Boxster\/Cayman and 991 Carrera\/Turbo.\u003c\/em\u003e\u003c\/p\u003e","brand":"SPL Parts","offers":[{"title":"Default Title","offer_id":52621759217962,"sku":"SPL-FLCAK-981","price":1999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/SPL-FLCAK-981-L1-0-Front-Lower-Control-Arm-Kit-HiRes__97233.1764387891.jpg?v=1789570973"},{"product_id":"spl-parts-bumpsteer-adjustable-front-tie-rod-ends-tre-porsche-996-997-991-boxster-cayman","title":"SPL Parts Bumpsteer Adjustable Front Tie Rod Ends (TRE) - Porsche 996\/997\/991\/Boxster\/Cayman","description":"\u003ch3\u003eSPL Parts Bumpsteer Adjustable Front Tie Rod Ends (TRE) — Porsche 996\/997\/991\/Boxster\/Cayman\u003c\/h3\u003e\n\u003cp\u003eAllows the tie rod end pivot to be relocated, correcting bump steer that results from modified caster or lower arm geometry — reducing lap times. On significantly lowered cars, relocating the pivot point also keeps the tie rod end from binding, preventing the inner tie rods from breaking or bending when racing.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSold as a pair. Made in the USA. Fits Porsche 996, 997, 991, Boxster and Cayman.\u003c\/em\u003e\u003c\/p\u003e","brand":"SPL Parts","offers":[{"title":"Default Title","offer_id":52621762920746,"sku":"SPL-TRE-996","price":649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/SPL-TRE-996-L1-0-Tie-Rod-End-HiRes-080423__76490.1740753215.jpg?v=1789571015"},{"product_id":"spl-parts-adjustable-front-caster-arms-w-anti-dive-porsche-981-991","title":"SPL Parts Adjustable Front Caster Arms w\/ Anti-Dive - Porsche 981\/991","description":"\u003ch3\u003eSPL Parts Adjustable Front Caster Arms with Anti-Dive — Porsche 981 \/ 991\u003c\/h3\u003e\n\u003cp\u003eProvides a wide range of front caster adjustment for precise alignment — improving turn-in response and compensating for left-to-right caster variance. Any change to front camber also changes front caster, making adjustable arms necessary for a proper alignment.\u003c\/p\u003e\n\u003cp\u003eLow-friction, smooth-articulating FK spherical bearings replace the stock mushy rubber bushing for a more responsive steering feel.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 981 and 991.\u003c\/em\u003e\u003c\/p\u003e","brand":"SPL Parts","offers":[{"title":"Default Title","offer_id":52621764591914,"sku":"SPL-TR-991","price":629.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/SPL-TR-991-L1-0-Tension-Rod-HiRes-080423__76665.1774718761.jpg?v=1789571015"},{"product_id":"spl-parts-front-endlinks-porsche-991-981-982-718","title":"SPL Parts Front Endlinks - Porsche 991 \/ 981 \/ 982 \/ 718","description":"\u003ch3\u003eSPL Parts Front Endlinks (Droplinks) — Porsche 991 \/ 981 \/ 982 \/ 718\u003c\/h3\u003e\n\u003cp\u003eMassive 2-piece Teflon-lined FK 1\/2\" bearings provide a long service life, with lightweight 6061-T6 aluminum center turnbuckles. Custom heat-treated chromoly high-misalignment studs offer up to 65° of articulation, preventing endlink bind. Length-adjustable to eliminate preload on the sway bars.\u003c\/p\u003e\n\u003ch3\u003eChoosing Your Version\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eRS Weissach\u003c\/strong\u003e is a distinct SKU built specifically for the 991.2 GT3 RS Weissach package chassis — check your car's exact configuration if you're unsure which applies.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 991 911, 981\/982 Boxster\/Cayman, and 718.\u003c\/em\u003e\u003c\/p\u003e","brand":"SPL Parts","offers":[{"title":"Standard","offer_id":52621770457386,"sku":"SPL-FE-991","price":329.0,"currency_code":"USD","in_stock":true},{"title":"RS Weissach","offer_id":52621770490154,"sku":"SPL-FE-991-WS","price":329.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/SPL-FE-991-L1-0-Front-Sway-Bar-Endlinks-HiRes-080423__44762.1709693903.jpg?v=1789571046"},{"product_id":"spl-parts-rear-endlinks-porsche-991-2-rs-weissach","title":"SPL Parts Rear Endlinks - Porsche 991.2 RS Weissach","description":"\u003ch3\u003eSPL Parts Rear Endlinks (Droplinks) — Porsche 991.2 RS Weissach\u003c\/h3\u003e\n\u003cp\u003eMassive 2-piece Teflon-lined FK 1\/2\" bearings provide a long service life, with lightweight 6061-T6 aluminum center turnbuckles. Length-adjustable to eliminate preload on the sway bars, which can result from uneven spring settling or uneven suspension heights from corner weighting.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eA distinct SKU built specifically for the 991.2 GT3 RS Weissach package chassis. Check your car's exact configuration before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"SPL Parts","offers":[{"title":"Default Title","offer_id":52621775405354,"sku":"SPL-RE-991-WS","price":329.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/SPL-RE-991-WS-L1-0-Rear-Sway-Bar-Endlinks-HiRes-080423__46614.1740827629.jpg?v=1789571072"},{"product_id":"spc-front-or-rear-camber-arms-pair-porsche-911-718-boxster-cayman","title":"SPC Front or Rear Camber Arms (Pair) - Porsche 911\/718\/Boxster\/Cayman","description":"\u003ch3\u003eSPC Front or Rear Camber Arms (Pair) — Porsche 911 \/ 718 \/ Boxster \/ Cayman\u003c\/h3\u003e\n\u003cp\u003eMakes the non-adjustable lower control arms on 996\/997-era and later Porsches adjustable for up to ±2° camber. 6061-T6 aluminum construction with booted ball joints and high-durometer bonded rubber bushings maintain OE noise, vibration and harshness levels.\u003c\/p\u003e\n\u003cp\u003eSPC's ball joint is greaseable and rebuildable — the only one on the market. If you wear out the ball joint race under heavy track use, a rebuild kit is available rather than needing to replace the whole arm. Comes with preset turning torque; adjust preload by turning the retainer for a looser or tighter feel.\u003c\/p\u003e\n\u003ch3\u003eFront or Rear\u003c\/h3\u003e\n\u003cp\u003eThis set works for either the front or rear. Want adjustability at all four corners? Order two sets.\u003c\/p\u003e\n\u003ch3\u003e⚠ Fitment Note\u003c\/h3\u003e\n\u003cp\u003eRear suspension fitment excludes vehicles with the Xenon headlamp option.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 911 (1999–2019), 718 Boxster\/Cayman, and Boxster\/Cayman (1997–2016).\u003c\/em\u003e\u003c\/p\u003e","brand":"SPC","offers":[{"title":"Default Title","offer_id":52622071398698,"sku":"SPC-72610","price":1290.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/72610.jpg?v=1789574612"},{"product_id":"spc-rear-toe-cam-bolt-porsche-911-718-boxster-cayman","title":"SPC Rear Toe Cam Bolt - Porsche 911\/718\/Boxster\/Cayman","description":"\u003ch3\u003eSPC Rear Toe Cam Bolt — Porsche 911 \/ 718 \/ Boxster \/ Cayman\u003c\/h3\u003e\n\u003cp\u003eReplaces corroded or damaged OE toe cam bolts on the rear of many late-model Porsches, restoring the same adjustment range as the factory part. Hex chromate-free finish, 700-hour salt spray tested for corrosion resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRear toe adjustment: ±1.00° (factory range). Required: 1 per wheel.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 911 (1999–2019), 718 Boxster\/Cayman, and Boxster\/Cayman (1997–2016).\u003c\/em\u003e\u003c\/p\u003e","brand":"SPC","offers":[{"title":"Default Title","offer_id":52622071628074,"sku":"SPC-72645","price":30.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/72645.jpg?v=1789574613"},{"product_id":"suspension-secrets-front-camber-blocks-porsche-911-gt3-rs-992","title":"Suspension Secrets Front Camber Blocks - Porsche 911 GT3 RS (992)","description":"\u003ch3\u003eSuspension Secrets Front Camber Blocks — Porsche 911 GT3 RS (992)\u003c\/h3\u003e\n\u003cp\u003eGreatly increase front axle grip while reducing understeer and tire wear. Front camber on the 992-generation GT3 RS is adjustable as standard, but the range is limited — leading to understeer and excessive tire wear when driving quickly.\u003c\/p\u003e\n\u003cp\u003eThe original Porsche camber blocks are limited to -2.8° of negative camber. These blocks allow up to -4.0° — ideal for fast road and track day use.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased front axle grip and improved steering feel\u003c\/li\u003e\n\u003cli\u003eReduced tire wear\u003c\/li\u003e\n\u003cli\u003eGreatly reduced understeer\u003c\/li\u003e\n\u003cli\u003eIncreased cornering speed on road and track\u003c\/li\u003e\n\u003cli\u003eEasy to install — remove the wheels, loosen two bolts, and swap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 911 GT3 RS (992).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrice includes applicable US import tariffs and fees for this UK-manufactured product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Suspension Secrets","offers":[{"title":"Default Title","offer_id":52622617346346,"sku":"SS-992GT3RS-FCB","price":1307.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/IMG_6879a.jpg?v=1789578466"},{"product_id":"suspension-secrets-track-pack-porsche-911-gt3-992","title":"Suspension Secrets Track Pack - Porsche 911 GT3 (992.1)","description":"\u003ch3\u003eSuspension Secrets Track Pack — Porsche 911 GT3 (992.1)\u003c\/h3\u003e\n\u003cp\u003eThe 992-generation GT3 is a great track car from the factory. While it features a decent amount of chassis adjustment as standard, it lacks the final level of adjustment needed for a comprehensive track day setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe pack includes: front camber blocks, rear camber shims, and bump-steer tie rod ends.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe front camber blocks and rear camber shims offer a greater adjustment range, letting you run more aggressive camber settings — improving steering feel in the corners and greatly reducing understeer, while reducing tire wear at the limit.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 911 GT3 (992.1).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrice includes applicable US import tariffs and fees for this UK-manufactured product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Suspension Secrets","offers":[{"title":"Default Title","offer_id":52622631993642,"sku":"SS-992GT3.1-TP","price":3538.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/ee714c4d-8fe5-4603-a6ae-ff4b0dbf468d.jpg?v=1789578506"},{"product_id":"suspension-secrets-track-pack-porsche-911-gt3-992-2","title":"Suspension Secrets Track Pack - Porsche 911 GT3 (992.2)","description":"\u003ch3\u003eSuspension Secrets Track Pack — Porsche 911 GT3 (992.2)\u003c\/h3\u003e\n\u003cp\u003eThe 992-generation GT3 is a great track car from the factory. While it features a decent amount of chassis adjustment as standard, it lacks the final level of adjustment needed for a comprehensive track day setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe pack includes: front camber blocks, rear camber shims, and bump-steer tie rod ends.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe front camber blocks and rear camber shims offer a greater adjustment range, letting you run more aggressive camber settings — improving steering feel in the corners and greatly reducing understeer, while reducing tire wear at the limit.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 911 GT3 (992.2).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrice includes applicable US import tariffs and fees for this UK-manufactured product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Suspension Secrets","offers":[{"title":"Default Title","offer_id":52622633402666,"sku":"SS-992GT3.2-TP","price":3538.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/dc45d203-f860-4418-a441-07a00d96349e.jpg?v=1789578522"}],"url":"https:\/\/team-anbd.com\/collections\/porsche.oembed?page=3","provider":"Team ANBD","version":"1.0","type":"link"}