{"title":"Porsche 718 Cayman \/ Boxster Performance Parts","description":"\u003cp\u003eParts confirmed to fit the 718 Porsche Cayman and Boxster, including the GT4, GT4 RS and Cayman GT4 Clubsport.\u003c\/p\u003e\u003cp\u003eAdjustable suspension and alignment hardware lead this page — bump steer tie rod ends, caster arms, monoball bushings and camber hardware — with aero, brake parts and cooling alongside.\u003c\/p\u003e\u003cp\u003eThe 718 is mid-engined and already close to neutral, so the useful work is holding that balance as tyre and brake temperature climb rather than chasing more grip. Tell us the variant and how you use it and we will confirm what fits. Installation and corner balancing available at our shop in Andover, NJ.\u003c\/p\u003e","products":[{"product_id":"front-splitter-kit-porsche-718-gt4","title":"Front Splitter Kit - Porsche 718 GT4","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eFront splitters produce front-end downforce without significantly increasing drag, by creating a large pressure delta between their top and bottom surfaces. This one was sized against the rear wing to hold a proper aero balance and reduce lap times.\u003c\/p\u003e\n\u003cp\u003eThe splitter is produced from carbon thermoplastic, the same material used in top-tier motorsport. It isn't brittle, so no cracking like carbon fiber or ABS, and it won't grab and bend under the car like aluminum. It abrades and takes a beating without losing performance or appearance.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Carbon Composite Splitter, left-hand\u003c\/li\u003e\n\u003cli\u003e(1) Carbon Composite Splitter, right-hand\u003c\/li\u003e\n\u003cli\u003e(7 pieces) Sheet Metal Bracket Kit\u003c\/li\u003e\n\u003cli\u003e(1) Cross Brace Beam\u003c\/li\u003e\n\u003cli\u003e(1) Splitter Tie\u003c\/li\u003e\n\u003cli\u003e(1) Machined Clevis\u003c\/li\u003e\n\u003cli\u003e(1) Hardware Kit including all necessary bolts, nuts and washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGreatly increases front-end downforce\u003c\/li\u003e\n\u003cli\u003eProduces high downforce suitable for large rear wings\u003c\/li\u003e\n\u003cli\u003eCapable of handling 300+ lbs\u003c\/li\u003e\n\u003cli\u003eCarbon thermoplastic construction — strength, low weight, durability and appearance\u003c\/li\u003e\n\u003cli\u003eSame material used in Indy Car, NASCAR and F1\u003c\/li\u003e\n\u003cli\u003eNon-invasive, easy install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon thermoplastic front splitter\u003c\/li\u003e\n\u003cli\u003eWill not grab and bend surfaces like aluminum units\u003c\/li\u003e\n\u003cli\u003eWill not crack and break like carbon and ABS units\u003c\/li\u003e\n\u003cli\u003eAbrasion resistant while remaining stiff\u003c\/li\u003e\n\u003cli\u003eCarbon fiber air dam\u003c\/li\u003e\n\u003cli\u003eCNC cut and bent brackets\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eIterative design work extracted more performance from the splitter, air dam and diffuser combination, sizing the splitter and dive planes to counteract the rear wing and diffuser for a safe, effective aero balance. Part of the Ventus 2 kit for the 718 GT4, which boosts downforce significantly over factory while keeping the car street-usable through reasonable splitter protrusion and wing widths.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0300A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556774834474,"sku":"A0300A","price":3299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0300A_5D_20Front_20Splitter_20Kit_20-_20Porsche_20718_20GT4.jpg?v=1789009837"},{"product_id":"ucw-rear-wing-kit-porsche-981-718-gt4","title":"UCW Rear Wing Kit - Porsche 981\/718 GT4","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe UCW Rear Wing significantly increases rear downforce on the Porsche 981 and 718, boosting confidence on track and reducing lap times. Designed to work with factory or aftermarket uprights, it bolts on like a stock replacement wing.\u003c\/p\u003e\n\u003cp\u003eThe airfoil was optimized within the available build volume — derived from the V1X — using state-of-the-art analysis software, with CFD confirming the wing receives adequate airflow once installed. In-house scan data gives a near-OEM fit and finish across both the 718 GT4 and the 981 GT4.\u003c\/p\u003e\n\u003cp\u003eBest suited to the track driver needing a moderate increase in rear downforce to balance a significant front aero package.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUCW Wings are assembled per order and ship within 5 business days of receipt of order unless otherwise specified.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear Wing Element Assembly\u003c\/li\u003e\n\u003cli\u003eFFV Rear Wing Carbon Endplate (2)\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all parts necessary for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized airfoil using the ANSYS Adjoint Solver\u003c\/li\u003e\n\u003cli\u003eImproved efficiency (L\/D)\u003c\/li\u003e\n\u003cli\u003eIncreased downforce\u003c\/li\u003e\n\u003cli\u003eCapable of generating and withstanding 500+ lbs of downforce\u003c\/li\u003e\n\u003cli\u003eCapable of balancing out significant front aerodynamic systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon fiber rear wing — 2x2 twill pre-preg carbon, autoclave cured, automotive high-gloss clear\u003c\/li\u003e\n\u003cli\u003eMachined billet aluminum wing mount\u003c\/li\u003e\n\u003cli\u003e2x2 twill carbon fiber endplates\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe wing generates downforce across a 0 to 15 degree angle of attack range, letting it balance a variety of front aerodynamic kits. Verus CFD data and real-world experimental data correlate closely.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0292A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 981 GT4 and 718 GT4.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556775948586,"sku":"A0292A","price":3299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0292A_5D_20UCW_20Rear_20Wing_20Kit_20-_20Porsche_20981-718_20GT4.jpg?v=1789009855"},{"product_id":"rear-diffuser-panel-kit-porsche-718-gt4-gt4rs","title":"Rear Diffuser Panel Kit - Porsche 718 GT4\/GT4RS","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe factory 718 GT4 rear diffuser performs well — until you swap the suitcase-style mufflers for an aftermarket exhaust. At that point the bumper becomes a parachute and hurts vehicle performance.\u003c\/p\u003e\n\u003cp\u003eThis kit fills that void. Using diffuser strakes and a properly fitted panel, it contains the horseshoe vortices coming off the rear wheels, improving performance and ensuring the factory centre diffuser gets clean airflow.\u003c\/p\u003e\n\u003cp\u003eIn-house scan data gives a near-OEM fit and finish, and analysis software confirmed the improvement over the OE setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e not compatible with OEM mufflers. This kit is specifically for cars running an aftermarket exhaust.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDiffuser Panel, left-hand side\u003c\/li\u003e\n\u003cli\u003eDiffuser Panel, right-hand side\u003c\/li\u003e\n\u003cli\u003eDiffuser Panel Bracket (2)\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all necessary pieces for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces drag\u003c\/li\u003e\n\u003cli\u003eFeeds the diffuser clean air\u003c\/li\u003e\n\u003cli\u003eIncreases fuel economy\u003c\/li\u003e\n\u003cli\u003eDecreases lift\u003c\/li\u003e\n\u003cli\u003eSimple, non-invasive bolt-on design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD optimized design\u003c\/li\u003e\n\u003cli\u003e5052 aluminum sheet metal\u003c\/li\u003e\n\u003cli\u003eCNC laser cut, CNC press brake bent\u003c\/li\u003e\n\u003cli\u003ePowder-coated black for durability\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0497A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 718 GT4 and GT4 RS.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556777193770,"sku":"A0497A","price":549.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0497A_5D_20Rear_20Diffuser_20Panel_20Kit_20-_20Porsche_20718_20GT4-GT4RS.jpg?v=1789009871"},{"product_id":"v1x-rear-wing-kit-porsche-981-718-gt4","title":"V1X Rear Wing Kit - Porsche 981\/718 GT4","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eA 300mm chord swan neck wing that dramatically improves rear-end grip at speed. The wing and full aero kit were developed in CFD to improve track performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe wing alone cuts serious lap time.\u003c\/strong\u003e In back-to-back customer testing on a relatively stock GT4 at just 4 degrees angle of attack, Verus recorded a reduction of \u003cstrong\u003e2.5 seconds at Thunderhill and 3.3 seconds at Laguna Seca\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt installs like the OEM wing, with no permanent modifications to the car. Construction matches high-end motorsport practice, which is how the wing weighs a mere 8 lbs. The uprights are CNC machined from 6061-T6 aluminum and FEA analyzed to keep strength high and weight minimal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eV1X Wings are assembled per order and ship within 5 business days of receipt of order unless otherwise specified.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Rear Wing, 300mm swan neck\u003c\/li\u003e\n\u003cli\u003eCarbon Vented Endplate (2)\u003c\/li\u003e\n\u003cli\u003eBillet Swan Neck Mount (2)\u003c\/li\u003e\n\u003cli\u003eBillet Swan Neck Upright (2)\u003c\/li\u003e\n\u003cli\u003eBillet Trunk Beauty Plate (2)\u003c\/li\u003e\n\u003cli\u003eGurney Flap with 3M VHB tape\u003c\/li\u003e\n\u003cli\u003eTrunk Strut\u003c\/li\u003e\n\u003cli\u003eDouble-sided tape for beauty plates and upright bolt covers\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2x2 twill, 3k, pre-preg carbon fiber\u003c\/li\u003e\n\u003cli\u003eCarbon inner rib for strength\u003c\/li\u003e\n\u003cli\u003eCarbon endplates\u003c\/li\u003e\n\u003cli\u003eWing weighs under 9 lbs\u003c\/li\u003e\n\u003cli\u003eMachined 6061-T6 aluminum mounts and uprights\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD optimized airfoil, highly efficient (great L\/D)\u003c\/li\u003e\n\u003cli\u003e15 total adjustment angles, -1 to 14 degrees\u003c\/li\u003e\n\u003cli\u003eCapable of generating and handling over 700 lbs of downforce at 120 MPH\u003c\/li\u003e\n\u003cli\u003eSwan neck design for improved efficiency from the wing element\u003c\/li\u003e\n\u003cli\u003eOEM bolt-on install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe airfoil profile was run through the ANSYS adjoint solver and iteratively improved. The wing was positioned to create a good aero balance with the rest of the Ventus 2 kit, which produces a significant downforce increase over the factory car. Verus CFD data and real-world experimental data correlate closely.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0149A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 981 GT4 and 718 GT4.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556789088554,"sku":"A0149A","price":6499.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0149A_5D_20V1X_20Rear_20Wing_20Kit_20-_20Porsche_20981-718_20GT4.jpg?v=1789009906"},{"product_id":"dive-plane-kit-dual-element-porsche-718-gt4","title":"Dive Plane Kit, Dual Element - Porsche 718 GT4","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThese dive planes increase front-end downforce, feed more high-pressure airflow to the factory intake duct, and keep the drag increase minimal.\u003c\/p\u003e\n\u003cp\u003eThey produce a safe aero balance with or without the Verus rear wing. Designed in CAD from scan data and optimized using CFD in OpenFOAM.\u003c\/p\u003e\n\u003cp\u003eConstruction is 1.5mm thick pre-preg, autoclave cured, 2x2 twill carbon with an automotive clear finish. \u003cstrong\u003eChoose gloss or matte.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e not compatible with the 718 GT4 RS.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDive Plane, upper left\u003c\/li\u003e\n\u003cli\u003eDive Plane, lower left\u003c\/li\u003e\n\u003cli\u003eDive Plane, upper right\u003c\/li\u003e\n\u003cli\u003eDive Plane, lower right\u003c\/li\u003e\n\u003cli\u003eInstall template\u003c\/li\u003e\n\u003cli\u003e3M VHB tape (4 pieces, one per dive plane)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD optimized for improved performance\u003c\/li\u003e\n\u003cli\u003eShifts aero balance forward, improving front-end grip\u003c\/li\u003e\n\u003cli\u003eAllows fine tuning of aero balance\u003c\/li\u003e\n\u003cli\u003eSimple double-sided tape installation with templates included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2x2 weave, autoclave cured, 1.5mm thick carbon fiber\u003c\/li\u003e\n\u003cli\u003eUV resistant, automotive grade clear\u003c\/li\u003e\n\u003cli\u003e3M VHB double-sided tape, cut to dive plane sizes\u003c\/li\u003e\n\u003cli\u003eTemplates to aid installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eDive planes shift aerodynamic balance forward without needing a larger front splitter, which can make a car impractical on the street. Beyond downforce, this kit was designed to feed the intake ducts clean, high-pressure air — at speed that pressure builds in the intake and creates a small supercharge effect in the manifold, improving horsepower and torque while ensuring the coldest possible air reaches the filter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Numbers:\u003c\/strong\u003e A0284A-POL (gloss clear) \/ A0284A-MAT (matte clear)\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Gloss Clear","offer_id":52556800590122,"sku":"A0284A-POL","price":1099.95,"currency_code":"USD","in_stock":true},{"title":"Matte Clear","offer_id":52556800622890,"sku":"A0284A-MAT","price":1099.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0284A-POL_5D_20Dive_20Plane_20Kit_2C_20Dual_20Element_20-_20Porsche_20718_20GT4_20_28Gloss_20Clear_29.jpg?v=1789010063"},{"product_id":"ventus-1-package-porsche-718-gt4","title":"Ventus 1 Package - Porsche 718 GT4","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Ventus 1 package is an entry-level aerodynamic kit for the 718 GT4, designed to increase downforce and reduce lap times — a way to add performance while maintaining the factory warranty.\u003c\/p\u003e\n\u003cp\u003eThe Dual-Element Dive Planes improve front-end downforce by generating downforce on the units themselves and improving front fender evacuation. The Rear Diffuser Panels balance that by containing the horseshoe vortices coming off the rear wheels once the large factory muffler is swapped for an aftermarket exhaust, filling the leftover gaps so the factory centre diffuser gets clean airflow.\u003c\/p\u003e\n\u003cp\u003eEvery product was developed with in-house scan data, CAD and CFD analysis, giving an OEM-like fit and finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoose gloss or matte clear\u003c\/strong\u003e for the dive planes.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Dual Element Dive Planes, gloss or matte finish\u003c\/li\u003e\n\u003cli\u003e(1) Rear Diffuser Panel Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSafe aero balance\u003c\/li\u003e\n\u003cli\u003eImproved efficiency (L\/D)\u003c\/li\u003e\n\u003cli\u003eIncreased downforce\u003c\/li\u003e\n\u003cli\u003eLow impact to drag\u003c\/li\u003e\n\u003cli\u003eTrue OEM-plus performance that flows with the factory body lines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDive planes — 2x2 twill weave, autoclave cured, 1.5mm thick carbon fiber, in your choice of automotive matte or high-gloss clear\u003c\/li\u003e\n\u003cli\u003eRear diffuser panels — 5052 aluminum sheet, CNC laser cut and press brake bent, powder-coated black\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout, with all necessary templates for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eAdding a little front downforce plus diffuser panels to feed the centre diffuser clean air improves aerodynamic efficiency safely while keeping a near-stock, OEM+ appearance. Verus CFD data and real-world testing correlate closely.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0705A-V1\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNote: the diffuser panels are for cars running an aftermarket exhaust — they're not compatible with OEM mufflers.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Gloss Clear","offer_id":52556807209258,"sku":"A0705A-V1-GLOSS","price":1399.95,"currency_code":"USD","in_stock":true},{"title":"Matte Clear","offer_id":52556807242026,"sku":"A0705A-V1-MATTE","price":1399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0705A-V1-GLOSS_5D_20Ventus_201_20Package_20-_20Porsche_20718_20GT4_20_28Gloss_20Clear_29.jpg?v=1789010157"},{"product_id":"ventus-2-package-porsche-718-gt4","title":"Ventus 2 Package - Porsche 718 GT4","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Ventus 2 package delivers a substantial increase in downforce for a small drag penalty over Ventus 1, and improves total aerodynamic efficiency (L\/D) compared to both OEM and Ventus 1 — while still maintaining the balance of the factory warranty.\u003c\/p\u003e\n\u003cp\u003eIt replaces the factory wing with the UCW Rear Wing, significantly increasing rear downforce. Because the UCW can balance a corresponding increase in front aero, the kit adds the carbon polyweave front splitter, which greatly increases front grip and — paired with the dive planes — is sized to balance the wing and diffuser panels for a safe, effective aero balance.\u003c\/p\u003e\n\u003cp\u003eEvery product was developed with in-house scan data, CAD and CFD analysis, giving an OEM-like fit and finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoose gloss or matte clear\u003c\/strong\u003e for the dive planes.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Dual Element Dive Planes, gloss or matte finish\u003c\/li\u003e\n\u003cli\u003e(1) Rear Diffuser Panel Kit\u003c\/li\u003e\n\u003cli\u003e(1) Polyweave Front Splitter Kit\u003c\/li\u003e\n\u003cli\u003e(1) UCW Rear Wing Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSafe, efficient aero balance — more driver confidence, lower lap times\u003c\/li\u003e\n\u003cli\u003eImproved efficiency (L\/D) over Ventus 1 through the front splitter and UCW wing\u003c\/li\u003e\n\u003cli\u003eIncreased downforce front and rear\u003c\/li\u003e\n\u003cli\u003eSubstantially greater downforce than Ventus 1 with minimal added drag\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon fiber rear wing — 2x2 twill pre-preg carbon, autoclave cured, automotive high-gloss clear, with machined billet aluminum uprights\u003c\/li\u003e\n\u003cli\u003eFront splitter — carbon thermoplastic\u003c\/li\u003e\n\u003cli\u003eDive planes — 2x2 weave, autoclave cured, 1.5mm thick carbon fiber, in your choice of matte or high-gloss clear\u003c\/li\u003e\n\u003cli\u003eRear diffuser panels — 5052 aluminum sheet, CNC laser cut and press brake bent, powder-coated black\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout, with all necessary templates for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eBuilt for the 718 GT4 owner wanting balanced aerodynamic performance that builds on the car's existing track capability. The UCW wing and front splitter together add significant downforce, reducing lap times and increasing corner speed, in a package balanced for consistent high-performance use. Verus CFD data and real-world testing correlate closely.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0705A-V2\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNote: the diffuser panels are for cars running an aftermarket exhaust — they're not compatible with OEM mufflers.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Gloss Clear","offer_id":52556808225066,"sku":"A0705A-V2-GLOSS","price":7099.95,"currency_code":"USD","in_stock":true},{"title":"Matte Clear","offer_id":52556808257834,"sku":"A0705A-V2-MATTE","price":7099.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0705A-V2-GLOSS_5D_20Ventus_202_20Package_20-_20Porsche_20718_20GT4_20_28Gloss_20Clear_29.jpg?v=1789010176"},{"product_id":"csf-aluminum-side-radiator-porsche-991-2-718-gt3-gt4","title":"CSF Aluminum Side Radiator - Porsche 991.2 \/ 718 \/ GT3 \/ GT4","description":"\u003ch3\u003eCSF Aluminum Side Radiators — Porsche 991.2 \/ 718 \/ GT3 \/ GT4\u003c\/h3\u003e\n\u003cp\u003eAll-aluminum side radiators covering a broad range of Porsche GT and Carrera models: 991.2 Carrera, GT3, GT3 RS, GT3 R, 991 GT2 and GT2 RS, plus 718 Boxster, Cayman and GT4.\u003c\/p\u003e\n\u003ch3\u003e⚠ Left and Right Are Separate Parts\u003c\/h3\u003e\n\u003cp\u003eThese are \u003cstrong\u003eside-specific\u003c\/strong\u003e and sold individually. Most cars use both — select the side you need, or order one of each for a full set.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eDirect fit, no modification required.\u003c\/em\u003e\u003c\/p\u003e","brand":"CSF","offers":[{"title":"Left","offer_id":52607766659370,"sku":"csf7086","price":685.0,"currency_code":"USD","in_stock":true},{"title":"Right","offer_id":52607766692138,"sku":"csf7087","price":685.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/846f33df09566834eaabf06dc9155436.png?v=1789448503"},{"product_id":"spl-parts-front-endlinks-porsche-991-981-982-718","title":"SPL Parts Front Endlinks - Porsche 991 \/ 981 \/ 982 \/ 718","description":"\u003ch3\u003eSPL Parts Front Endlinks (Droplinks) — Porsche 991 \/ 981 \/ 982 \/ 718\u003c\/h3\u003e\n\u003cp\u003eMassive 2-piece Teflon-lined FK 1\/2\" bearings provide a long service life, with lightweight 6061-T6 aluminum center turnbuckles. Custom heat-treated chromoly high-misalignment studs offer up to 65° of articulation, preventing endlink bind. Length-adjustable to eliminate preload on the sway bars.\u003c\/p\u003e\n\u003ch3\u003eChoosing Your Version\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eRS Weissach\u003c\/strong\u003e is a distinct SKU built specifically for the 991.2 GT3 RS Weissach package chassis — check your car's exact configuration if you're unsure which applies.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 991 911, 981\/982 Boxster\/Cayman, and 718.\u003c\/em\u003e\u003c\/p\u003e","brand":"SPL Parts","offers":[{"title":"Standard","offer_id":52621770457386,"sku":"SPL-FE-991","price":329.0,"currency_code":"USD","in_stock":true},{"title":"RS Weissach","offer_id":52621770490154,"sku":"SPL-FE-991-WS","price":329.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/SPL-FE-991-L1-0-Front-Sway-Bar-Endlinks-HiRes-080423__44762.1709693903.jpg?v=1789571046"},{"product_id":"spc-front-or-rear-camber-arms-pair-porsche-911-718-boxster-cayman","title":"SPC Front or Rear Camber Arms (Pair) - Porsche 911\/718\/Boxster\/Cayman","description":"\u003ch3\u003eSPC Front or Rear Camber Arms (Pair) — Porsche 911 \/ 718 \/ Boxster \/ Cayman\u003c\/h3\u003e\n\u003cp\u003eMakes the non-adjustable lower control arms on 996\/997-era and later Porsches adjustable for up to ±2° camber. 6061-T6 aluminum construction with booted ball joints and high-durometer bonded rubber bushings maintain OE noise, vibration and harshness levels.\u003c\/p\u003e\n\u003cp\u003eSPC's ball joint is greaseable and rebuildable — the only one on the market. If you wear out the ball joint race under heavy track use, a rebuild kit is available rather than needing to replace the whole arm. Comes with preset turning torque; adjust preload by turning the retainer for a looser or tighter feel.\u003c\/p\u003e\n\u003ch3\u003eFront or Rear\u003c\/h3\u003e\n\u003cp\u003eThis set works for either the front or rear. Want adjustability at all four corners? Order two sets.\u003c\/p\u003e\n\u003ch3\u003e⚠ Fitment Note\u003c\/h3\u003e\n\u003cp\u003eRear suspension fitment excludes vehicles with the Xenon headlamp option.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 911 (1999–2019), 718 Boxster\/Cayman, and Boxster\/Cayman (1997–2016).\u003c\/em\u003e\u003c\/p\u003e","brand":"SPC","offers":[{"title":"Default Title","offer_id":52622071398698,"sku":"SPC-72610","price":1290.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/72610.jpg?v=1789574612"},{"product_id":"spc-rear-toe-cam-bolt-porsche-911-718-boxster-cayman","title":"SPC Rear Toe Cam Bolt - Porsche 911\/718\/Boxster\/Cayman","description":"\u003ch3\u003eSPC Rear Toe Cam Bolt — Porsche 911 \/ 718 \/ Boxster \/ Cayman\u003c\/h3\u003e\n\u003cp\u003eReplaces corroded or damaged OE toe cam bolts on the rear of many late-model Porsches, restoring the same adjustment range as the factory part. Hex chromate-free finish, 700-hour salt spray tested for corrosion resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRear toe adjustment: ±1.00° (factory range). Required: 1 per wheel.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 911 (1999–2019), 718 Boxster\/Cayman, and Boxster\/Cayman (1997–2016).\u003c\/em\u003e\u003c\/p\u003e","brand":"SPC","offers":[{"title":"Default Title","offer_id":52622071628074,"sku":"SPC-72645","price":30.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/72645.jpg?v=1789574613"},{"product_id":"suspension-secrets-uprated-spring-package-porsche-718-gt4-rs","title":"Suspension Secrets Uprated Spring Package - Porsche 718 GT4 RS","description":"\u003ch3\u003eSuspension Secrets Uprated Spring Package — Porsche 718 GT4 RS\u003c\/h3\u003e\n\u003cp\u003eAs standard, the GT4 RS suffers rear axle instability, especially obvious when pushed hard on track. Front and rear spring rates aren't perfectly matched for optimum chassis balance and damper efficiency — the rear axle is over-sprung and underdamped, causing a hopping and skipping effect through corners that reduces driver confidence. The standard front springs are also too soft, letting the front compress and unsettle the rear.\u003c\/p\u003e\n\u003cp\u003eThese uprated rates soften the rear axle slightly and stiffen the front slightly — matching the rear springs to the OEM dampers to remove the skipping effect, and reducing front dive under heavy braking to keep the rear wheels planted and turn-in stable.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eImproves front-to-rear balance substantially\u003c\/li\u003e\n\u003cli\u003eIncreases grip and stability, maximizing contact patch through the corner\u003c\/li\u003e\n\u003cli\u003eAllows the car to be lowered 20mm below the standard minimum ride height for track use\u003c\/li\u003e\n\u003cli\u003eStandard ride height can be maintained if preferred\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 718 GT4 RS.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrice includes applicable US import tariffs and fees for this UK-manufactured product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Suspension Secrets","offers":[{"title":"Default Title","offer_id":52622789050666,"sku":"SS-718GT4RS-USP","price":1700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/porschegt4rssprings_1_57f68e0e-0295-430f-bbf9-1c51b05bca2e.jpg?v=1789579556"},{"product_id":"suspension-secrets-performance-strut-tower-protection-package-porsche-718-gt4-rs","title":"Suspension Secrets Performance Strut Tower Protection Package - Porsche 718 GT4 RS","description":"\u003ch3\u003eSuspension Secrets Performance Strut Tower Protection Package — Porsche 718 GT4 RS\u003c\/h3\u003e\n\u003cp\u003eA proven suspension upgrade designed to help prevent front strut tower failure — a known issue on hard-driven Porsche GT models, particularly on track day and motorsport cars.\u003c\/p\u003e\n\u003cp\u003eLowering the chassis significantly reduces bump travel in the OEM front dampers, which can cause them to bottom out over large compressions or kerbs — sending large shock loading forces directly through the damper piston into the top mount assembly, potentially resulting in deformation, cracking, or costly chassis damage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis package combines the Front Camber Caster Plate Top Mounts with uprated spring cups, letting you lower the car while retaining enough bump travel in the OEM dampers to avoid strut tower damage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 718 GT4 RS.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrice includes applicable US import tariffs and fees for this UK-manufactured product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Suspension Secrets","offers":[{"title":"Default Title","offer_id":52622791573802,"sku":"SS-718GT4RS-STPP","price":1360.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/IMG_7012a_90b9e780-4612-4b29-b4e3-673b8229c3e9.jpg?v=1789579574"},{"product_id":"suspension-secrets-front-camber-caster-plate-top-mounts-porsche-718-gt4-rs","title":"Suspension Secrets Front Camber Caster Plate Top Mounts - Porsche 718 GT4 RS","description":"\u003ch3\u003eSuspension Secrets Front Camber Caster Plate Top Mounts — Porsche 718 GT4 RS\u003c\/h3\u003e\n\u003cp\u003eUnlock more front-end grip and steering feel. GT4 RS features adjustable camber as standard, but the range is inadequate to make the best use of grippy track tires.\u003c\/p\u003e\n\u003cp\u003eIncreasing front camber with shims in the control arms pulls the front wheels forward in the arch, causing the leading edge of the tires to collide with the wheel arch liners at steering lock. These camber caster plate top mounts solve that issue.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 718 GT4 RS.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrice includes applicable US import tariffs and fees for this UK-manufactured product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Suspension Secrets","offers":[{"title":"Default Title","offer_id":52622792786218,"sku":"SS-718GT4RS-CCPTM","price":1020.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/IMG_7014aa_3825e952-5bc8-4066-825b-da1e1813433a.jpg?v=1789579592"},{"product_id":"suspension-secrets-rear-top-mount-camber-plate-stage-1-porsche-718-gt4-rs","title":"Suspension Secrets Rear Top Mount Camber Plate Stage 1 - Porsche 718 GT4 RS","description":"\u003ch3\u003eSuspension Secrets Rear Top Mount Camber Plate Stage 1 — Porsche 718 GT4 RS\u003c\/h3\u003e\n\u003cp\u003eTransform rear axle grip on road and track. Installing wider tires can significantly increase grip — moving from a standard 295 rear tire profile to 305 offers a significant grip boost. As standard, a 305 tire will contact the rear arches, making it impossible to run.\u003c\/p\u003e\n\u003cp\u003eA direct bolt-on replacement rear top mount with offset rear camber lets you fit a 305-width rear tire on the standard wheels inside the wheel arches without contact, while maintaining the OEM damper ratio — so there's no difference in damper feel.\u003c\/p\u003e\n\u003ch3\u003eAdditional Components Option\u003c\/h3\u003e\n\u003cp\u003eAdd the Adjustable Rear Toe Arms alongside this top mount, or select no additional components.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 718 GT4 RS.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrice includes applicable US import tariffs and fees for this UK-manufactured product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Suspension Secrets","offers":[{"title":"No Additional Components","offer_id":52622794162474,"sku":"SS-718GT4RS-RTMCP1","price":1020.0,"currency_code":"USD","in_stock":true},{"title":"With Adjustable Rear Toe Arms","offer_id":52622794195242,"sku":"SS-718GT4RS-RTMCP1-RTA","price":1020.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/IMG_7028a.jpg?v=1789579616"},{"product_id":"suspension-secrets-rear-top-mount-camber-plate-stage-2-porsche-718-gt4-rs","title":"Suspension Secrets Rear Top Mount Camber Plate Stage 2 - Porsche 718 GT4 RS","description":"\u003ch3\u003eSuspension Secrets Rear Top Mount Camber Plate Stage 2 — Porsche 718 GT4 RS\u003c\/h3\u003e\n\u003cp\u003eA ground-breaking, world-first upgrade that allows you to install and run up to a 325 rear profile tire with no body modifications or other permanent changes required. Previously considered impossible, this design packages a 325-section tire on the stock body.\u003c\/p\u003e\n\u003cp\u003eDeveloped to match the same tire widths as a 991.2 GT3 RS Weissach on the front and rear axles — after months of development and road\/track testing.\u003c\/p\u003e\n\u003ch3\u003eAdditional Components Option\u003c\/h3\u003e\n\u003cp\u003eChoose from: no additional components, Adjustable Rear Toe Arms, Rear Spring Kit, or Adjustable Rear Toe Arms with Rear Spring Kit.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 718 GT4 RS.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrice includes applicable US import tariffs and fees for this UK-manufactured product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Suspension Secrets","offers":[{"title":"No Additional Components","offer_id":52622798586154,"sku":"SS-718GT4RS-RTMCP2","price":1700.0,"currency_code":"USD","in_stock":true},{"title":"With Adjustable Rear Toe Arms","offer_id":52622798618922,"sku":"SS-718GT4RS-RTMCP2-RTA","price":1700.0,"currency_code":"USD","in_stock":true},{"title":"With Rear Spring Kit","offer_id":52622798651690,"sku":"SS-718GT4RS-RTMCP2-RSK","price":1700.0,"currency_code":"USD","in_stock":true},{"title":"With Rear Toe Arms and Spring Kit","offer_id":52622798684458,"sku":"SS-718GT4RS-RTMCP2-RTASK","price":1700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/IMG_7030a.jpg?v=1789579654"},{"product_id":"suspension-secrets-adjustable-rear-toe-arms-porsche-718-gt4-rs","title":"Suspension Secrets Adjustable Rear Toe Arms - Porsche 718 GT4 RS","description":"\u003ch3\u003eSuspension Secrets Adjustable Rear Toe Arms — Porsche 718 GT4 RS\u003c\/h3\u003e\n\u003cp\u003eWhile the GT4 RS features longer toe arms than the standard GT4, allowing more aggressive track geometry, the range of adjustment is still limited.\u003c\/p\u003e\n\u003cp\u003eThese toe arms provide a larger adjustment range, letting you increase rear camber — for more cornering grip — while retaining good toe-in for traction. Solidly mounted, so toe angle stays constant throughout the duration of a corner, increasing cornering stability.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 718 GT4 RS.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrice includes applicable US import tariffs and fees for this UK-manufactured product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Suspension Secrets","offers":[{"title":"Default Title","offer_id":52622801076522,"sku":"SS-718GT4RS-RTA","price":911.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/IMG_7032a.jpg?v=1789579675"},{"product_id":"suspension-secrets-adjustable-bump-steer-tie-rod-ends-porsche-718-gt4-rs","title":"Suspension Secrets Adjustable Bump Steer Tie Rod Ends - Porsche 718 GT4 RS","description":"\u003ch3\u003eSuspension Secrets Adjustable Bump Steer Tie Rod Ends — Porsche 718 GT4 RS\u003c\/h3\u003e\n\u003cp\u003eLowering the front ride height improves braking stability and turn-in response, but can create bump steer — leading to vague and inaccurate steering when pushing hard on track.\u003c\/p\u003e\n\u003cp\u003eThese fully adjustable tie rod ends can be shimmed to eliminate bump steer completely.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eImproved steering accuracy\u003c\/li\u003e\n\u003cli\u003eRemoval of bump steer\u003c\/li\u003e\n\u003cli\u003eReduced understeer\u003c\/li\u003e\n\u003cli\u003eEnables a lower front ride height on track without inducing bump steer\u003c\/li\u003e\n\u003cli\u003eFully adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 718 GT4 RS.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrice includes applicable US import tariffs and fees for this UK-manufactured product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Suspension Secrets","offers":[{"title":"Default Title","offer_id":52622801502506,"sku":"SS-718GT4RS-BSTRE","price":654.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/IMG_7008a_bb8e043f-4a6d-4ff7-977e-7f4181d29d2d.jpg?v=1789579693"},{"product_id":"suspension-secrets-front-amp-rear-camber-shim-kit-porsche-718-gt4-rs","title":"Suspension Secrets Front \u0026amp; Rear Camber Shim Kit - Porsche 718 GT4 RS","description":"\u003ch3\u003eSuspension Secrets Front \u0026amp; Rear Camber Shim Kit — Porsche 718 GT4 RS\u003c\/h3\u003e\n\u003cp\u003eCamber angle is adjustable as standard on the GT4 RS, but not enough for a true track day setup. Stainless steel camber shims slot easily into the front lower suspension arms — a cost-effective upgrade.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eImproved negative camber on the front axle\u003c\/li\u003e\n\u003cli\u003eReduction in tire wear\u003c\/li\u003e\n\u003cli\u003eGreatly improved handling and steering feedback\u003c\/li\u003e\n\u003cli\u003eMore neutral chassis balance\u003c\/li\u003e\n\u003cli\u003eEasy to install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit includes: 4× 0.5mm, 4× 1mm, and 4× 2mm shims\u003c\/strong\u003e — a variety of thicknesses for precise camber adjustment.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 718 GT4 RS.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrice includes applicable US import tariffs and fees for this UK-manufactured product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Suspension Secrets","offers":[{"title":"Default Title","offer_id":52622804189482,"sku":"SS-718GT4RS-FRCSK","price":176.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/IMG_7016a_e9a40459-a526-4738-b3e4-f0a81638a4cb.jpg?v=1789579716"},{"product_id":"suspension-secrets-seat-raisers-porsche-718-gt4-rs","title":"Suspension Secrets Seat Raisers - Porsche 718 GT4 RS","description":"\u003ch3\u003eSuspension Secrets Seat Raisers — Porsche 718 GT4 RS\u003c\/h3\u003e\n\u003cp\u003eRecline your seat further backwards, accentuating the seat's \"bucket\" shape to help prevent sliding forward under hard braking on track.\u003c\/p\u003e\n\u003cp\u003eParticularly useful if your GT4 RS isn't equipped with harnesses — the improved seating position lets you modulate the brakes more effectively, since less effort is spent preventing yourself from sliding around.\u003c\/p\u003e\n\u003ch3\u003e⚠ Compatibility Note\u003c\/h3\u003e\n\u003cp\u003eOnly compatible with cars fitted with the Porsche 918-style non-folding carbon fiber seats.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 718 GT4 RS.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrice includes applicable US import tariffs and fees for this UK-manufactured product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Suspension Secrets","offers":[{"title":"Default Title","offer_id":52622807925034,"sku":"SS-718GT4RS-SR","price":422.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/IMG_7022a_456f249c-9871-40d8-96d2-984a8b5e1aed.jpg?v=1789579733"},{"product_id":"suspension-secrets-performance-strut-tower-protection-package-porsche-981-718-cayman-gt4","title":"Suspension Secrets Performance Strut Tower Protection Package - Porsche 981\/718 Cayman GT4","description":"\u003ch3\u003eSuspension Secrets Performance Strut Tower Protection Package — Porsche 981 \/ 718 Cayman GT4\u003c\/h3\u003e\n\u003cp\u003eA proven suspension upgrade designed to help prevent front strut tower failure — a known issue on hard-driven Porsche GT models, particularly on track day and motorsport cars.\u003c\/p\u003e\n\u003cp\u003eLowering the chassis significantly reduces bump travel in the OEM front dampers, which can cause them to bottom out over large compressions or kerbs — sending large shock loading forces directly through the damper piston into the top mount assembly, potentially resulting in deformation, cracking, or costly chassis damage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis package combines the Front Camber Caster Plate Top Mounts with uprated spring cups, letting you lower the car while retaining enough bump travel in the OEM dampers to avoid strut tower damage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 981 and 718 Cayman GT4.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrice includes applicable US import tariffs and fees for this UK-manufactured product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Suspension Secrets","offers":[{"title":"Default Title","offer_id":52622812578090,"sku":"SS-CAYGT4-STPP","price":1360.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/IMG_7012a_430eb6c2-7aeb-41e2-9c9e-cc9f1360939e.jpg?v=1789579793"},{"product_id":"suspension-secrets-uprated-spring-package-porsche-981-718-cayman-gt4","title":"Suspension Secrets Uprated Spring Package - Porsche 981\/718 Cayman GT4","description":"\u003ch3\u003eSuspension Secrets Uprated Spring Package — Porsche 981 \/ 718 Cayman GT4\u003c\/h3\u003e\n\u003cp\u003eAs standard, the GT4 suffers rear axle instability, especially obvious when pushed hard on track. Front and rear spring rates aren't perfectly matched for optimum chassis balance and damper efficiency — the rear axle is over-sprung and underdamped, causing a hopping and skipping effect through corners that reduces driver confidence. The standard front springs are also too soft, letting the front compress and unsettle the rear.\u003c\/p\u003e\n\u003cp\u003eThese uprated rates soften the rear axle slightly and stiffen the front slightly — matching the rear springs to the OEM dampers to remove the skipping effect, and reducing front dive under heavy braking to keep the rear wheels planted and turn-in stable.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eImproves front-to-rear balance substantially\u003c\/li\u003e\n\u003cli\u003eIncreases grip and stability, maximizing contact patch through the corner\u003c\/li\u003e\n\u003cli\u003eAllows the car to be lowered below the standard minimum ride height for track use\u003c\/li\u003e\n\u003cli\u003eStandard ride height can be maintained if preferred\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 981 and 718 Cayman GT4.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrice includes applicable US import tariffs and fees for this UK-manufactured product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Suspension Secrets","offers":[{"title":"Default Title","offer_id":52622815166762,"sku":"SS-CAYGT4-USP","price":1700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/porschegt4rssprings_1_35e2cbb8-122f-474f-b923-ef7db729a262.jpg?v=1789579812"},{"product_id":"suspension-secrets-front-camber-caster-plate-top-mounts-porsche-981-718-cayman-gt4","title":"Suspension Secrets Front Camber Caster Plate Top Mounts - Porsche 981\/718 Cayman GT4","description":"\u003ch3\u003eSuspension Secrets Front Camber Caster Plate Top Mounts — Porsche 981 \/ 718 Cayman GT4\u003c\/h3\u003e\n\u003cp\u003eUnlock more front-end grip and steering feel. The GT4 features adjustable camber as standard, but the range is inadequate to make the best use of grippy track tires.\u003c\/p\u003e\n\u003cp\u003eIncreasing front camber with shims in the control arms pulls the front wheels forward in the arch, causing the leading edge of the tires to collide with the wheel arch liners at steering lock. These camber caster plate top mounts solve that issue.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 981 and 718 Cayman GT4.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrice includes applicable US import tariffs and fees for this UK-manufactured product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Suspension Secrets","offers":[{"title":"Default Title","offer_id":52622816444714,"sku":"SS-CAYGT4-CCPTM","price":1020.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/IMG_7014aa_b721ad2d-06a2-4e7c-9e02-4e216ab298f7.jpg?v=1789579829"},{"product_id":"suspension-secrets-rear-top-mount-camber-plate-stage-1-porsche-981-718-cayman-gt4","title":"Suspension Secrets Rear Top Mount Camber Plate Stage 1 - Porsche 981\/718 Cayman GT4","description":"\u003ch3\u003eSuspension Secrets Rear Top Mount Camber Plate Stage 1 — Porsche 981 \/ 718 Cayman GT4\u003c\/h3\u003e\n\u003cp\u003eTransform rear axle grip on road and track. Installing wider tires can significantly increase grip levels. As standard, a wider rear tire will make contact with the rear arches, making it impossible to operate.\u003c\/p\u003e\n\u003cp\u003eA direct bolt-on replacement rear top mount with offset rear camber lets you fit a wider rear tire on the standard wheels inside the wheel arches without contact, while maintaining the OEM damper ratio — so there's no difference in damper feel.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 981 and 718 Cayman GT4.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrice includes applicable US import tariffs and fees for this UK-manufactured product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Suspension Secrets","offers":[{"title":"Default Title","offer_id":52622819524906,"sku":"SS-CAYGT4-RTMCP1","price":1020.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/IMG_7028a_1ea15c9f-5b20-45e3-96ac-9c5461cc8f29.jpg?v=1789579866"},{"product_id":"suspension-secrets-rear-top-mount-camber-plate-stage-2-porsche-981-718-cayman-gt4","title":"Suspension Secrets Rear Top Mount Camber Plate Stage 2 - Porsche 981\/718 Cayman GT4","description":"\u003ch3\u003eSuspension Secrets Rear Top Mount Camber Plate Stage 2 — Porsche 981 \/ 718 Cayman GT4\u003c\/h3\u003e\n\u003cp\u003eA ground-breaking, world-first upgrade that allows you to run a significantly wider rear profile tire with no body modifications or other permanent changes required. This design packages a much wider rear tire on the stock body.\u003c\/p\u003e\n\u003cp\u003eDeveloped through months of research and road\/track testing to push the limits of what tire width is possible on the standard chassis.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 981 and 718 Cayman GT4.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrice includes applicable US import tariffs and fees for this UK-manufactured product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Suspension Secrets","offers":[{"title":"Default Title","offer_id":52622821982506,"sku":"SS-CAYGT4-RTMCP2","price":1700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/IMG_7030a_6648a556-6ad1-4afa-bbcd-73a6d1e9785b.jpg?v=1789579883"},{"product_id":"suspension-secrets-adjustable-bump-steer-tie-rod-ends-porsche-718-cayman-boxster-gt4","title":"Suspension Secrets Adjustable Bump Steer Tie Rod Ends - Porsche 718 Cayman\/Boxster GT4","description":"\u003ch3\u003eSuspension Secrets Adjustable Bump Steer Tie Rod Ends — Porsche 718 Cayman\/Boxster GT4\u003c\/h3\u003e\n\u003cp\u003eLowering the front ride height improves braking stability and turn-in response, but can create bump steer — leading to vague and inaccurate steering when pushing hard on track.\u003c\/p\u003e\n\u003cp\u003eThese fully adjustable tie rod ends can be shimmed to eliminate bump steer completely.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eImproved steering accuracy\u003c\/li\u003e\n\u003cli\u003eRemoval of bump steer\u003c\/li\u003e\n\u003cli\u003eReduced understeer\u003c\/li\u003e\n\u003cli\u003eEnables a lower front ride height on track without inducing bump steer\u003c\/li\u003e\n\u003cli\u003eFully adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 718 Cayman GT4.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrice includes applicable US import tariffs and fees for this UK-manufactured product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Suspension Secrets","offers":[{"title":"Default Title","offer_id":52622823850282,"sku":"SS-718CAYGT4-BSTRE","price":654.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/IMG_7008a_88b39994-68b7-4e41-ab78-a5f76487dc99.jpg?v=1789579901"},{"product_id":"suspension-secrets-lower-control-arm-inner-monoball-porsche-718-cayman-boxster-gt4","title":"Suspension Secrets Lower Control Arm Inner Monoball - Porsche 718 Cayman\/Boxster GT4","description":"\u003ch3\u003eSuspension Secrets Lower Control Arm Inner Monoball — Porsche 718 Cayman\/Boxster GT4\u003c\/h3\u003e\n\u003cp\u003eIncrease chassis rigidity and sharpness. The standard inner suspension bushes are pliable rubber, which flexes when driving quickly — causing suspension geometry to change and the car to feel sloppy and vague.\u003c\/p\u003e\n\u003cp\u003eBillet aluminum monoballs replace the OEM rubber bushes, so the suspension isn't deflected when driving hard.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased chassis rigidity\u003c\/li\u003e\n\u003cli\u003eReduced geometry change when cornering\u003c\/li\u003e\n\u003cli\u003eImproved steering sharpness and chassis feedback\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 718 Cayman GT4.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrice includes applicable US import tariffs and fees for this UK-manufactured product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Suspension Secrets","offers":[{"title":"Default Title","offer_id":52622829551914,"sku":"SS-718CAYGT4-LCAIM","price":516.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/IMG_7020a_49bea953-022b-4958-93f6-720dfd286e69.jpg?v=1789579967"},{"product_id":"suspension-secrets-front-amp-rear-camber-shim-kit-porsche-981-718-cayman-gt4","title":"Suspension Secrets Front \u0026amp; Rear Camber Shim Kit - Porsche 981\/718 Cayman GT4","description":"\u003ch3\u003eSuspension Secrets Front \u0026amp; Rear Camber Shim Kit — Porsche 981 \/ 718 Cayman GT4\u003c\/h3\u003e\n\u003cp\u003eCamber angle is adjustable as standard on the GT4, but not enough for a true track day setup. Stainless steel camber shims slot easily into the front lower suspension arms — a cost-effective upgrade.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eImproved negative camber on the front axle\u003c\/li\u003e\n\u003cli\u003eReduction in tire wear\u003c\/li\u003e\n\u003cli\u003eGreatly improved handling and steering feedback\u003c\/li\u003e\n\u003cli\u003eMore neutral chassis balance\u003c\/li\u003e\n\u003cli\u003eEasy to install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit includes a variety of shim thicknesses for precise camber adjustment.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 981 and 718 Cayman GT4.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrice includes applicable US import tariffs and fees for this UK-manufactured product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Suspension Secrets","offers":[{"title":"Default Title","offer_id":52622830928170,"sku":"SS-CAYGT4-FRCSK","price":176.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/IMG_7016a_e2980fbb-98eb-455c-98f6-9a9b5ee1c691.jpg?v=1789580005"},{"product_id":"suspension-secrets-solid-control-arm-bushes-porsche-981-718-cayman-gt4","title":"Suspension Secrets Solid Control Arm Bushes - Porsche 981\/718 Cayman GT4","description":"\u003ch3\u003eSuspension Secrets Solid Control Arm Bushes — Porsche 981 \/ 718 Cayman GT4\u003c\/h3\u003e\n\u003cp\u003eImprove steering accuracy and braking stability. The standard control arm bushes are rubber, which flexes during cornering and braking — resulting in vague steering feel and instability under braking.\u003c\/p\u003e\n\u003cp\u003eMachined aluminum bushes replace the original Porsche rubber bushes. Being solid, they don't flex during fast driving, delivering more accurate and communicative steering along with increased braking stability.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 981 and 718 Cayman GT4.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrice includes applicable US import tariffs and fees for this UK-manufactured product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Suspension Secrets","offers":[{"title":"Default Title","offer_id":52622833287466,"sku":"SS-CAYGT4-SCAB","price":320.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/IMG_7018a_e9fec069-c1b7-4d89-a401-2886eea91637.jpg?v=1789580022"},{"product_id":"suspension-secrets-front-camber-caster-plate-top-mounts-porsche-981-718-cayman-gts","title":"Suspension Secrets Front Camber Caster Plate Top Mounts - Porsche 981\/718 Cayman GTS","description":"\u003ch3\u003eSuspension Secrets Front Camber Caster Plate Top Mounts — Porsche 981 \/ 718 Cayman GTS\u003c\/h3\u003e\n\u003cp\u003eUnlock more front-end grip and steering feel. The GTS features adjustable camber as standard, but the range is inadequate to make the best use of grippy track tires.\u003c\/p\u003e\n\u003cp\u003eIncreasing front camber with shims in the control arms pulls the front wheels forward in the arch, causing the leading edge of the tires to collide with the wheel arch liners at steering lock. These camber caster plate top mounts solve that issue.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 981 and 718 Cayman GTS.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrice includes applicable US import tariffs and fees for this UK-manufactured product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Suspension Secrets","offers":[{"title":"Default Title","offer_id":52622864089386,"sku":"SS-CAYGTS-CCPTM","price":1156.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/IMG_7038a.jpg?v=1789580266"},{"product_id":"suspension-secrets-rear-camber-plate-top-mounts-porsche-981-718-cayman-gts","title":"Suspension Secrets Rear Camber Plate Top Mounts - Porsche 981\/718 Cayman GTS","description":"\u003ch3\u003eSuspension Secrets Rear Camber Plate Top Mounts — Porsche 981 \/ 718 Cayman GTS\u003c\/h3\u003e\n\u003cp\u003eTransform rear axle grip on road and track. Rear camber adjustment is limited as standard on the GTS, restricting how aggressive a track setup can be.\u003c\/p\u003e\n\u003cp\u003eA direct bolt-on replacement rear top mount with offset rear camber gives a much wider adjustment range, while maintaining the OEM damper ratio — so there's no difference in damper feel.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 981 and 718 Cayman GTS.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrice includes applicable US import tariffs and fees for this UK-manufactured product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Suspension Secrets","offers":[{"title":"Default Title","offer_id":52622864777514,"sku":"SS-CAYGTS-RCPTM","price":1020.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/IMG_7040a.jpg?v=1789580291"},{"product_id":"suspension-secrets-adjustable-rear-toe-arms-porsche-981-718-cayman-gts","title":"Suspension Secrets Adjustable Rear Toe Arms - Porsche 981\/718 Cayman GTS","description":"\u003ch3\u003eSuspension Secrets Adjustable Rear Toe Arms — Porsche 981 \/ 718 Cayman GTS\u003c\/h3\u003e\n\u003cp\u003eTake on-track performance to the next level. The standard toe arms allow only limited adjustment for track geometry setups.\u003c\/p\u003e\n\u003cp\u003eThese arms provide a larger adjustment range, letting you increase rear camber — for more cornering grip — while retaining good toe-in for traction. Solidly mounted, so toe angle stays constant throughout the duration of a corner, increasing cornering stability.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 981 and 718 Cayman GTS.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrice includes applicable US import tariffs and fees for this UK-manufactured product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Suspension Secrets","offers":[{"title":"Default Title","offer_id":52622869528874,"sku":"SS-CAYGTS-RTA","price":775.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/IMG_7032a_07ed0d0d-034b-405a-bb14-4da724fd6b83.jpg?v=1789580315"},{"product_id":"suspension-secrets-adjustable-bump-steer-tie-rod-ends-porsche-981-718-cayman-gts","title":"Suspension Secrets Adjustable Bump Steer Tie Rod Ends - Porsche 981\/718 Cayman GTS","description":"\u003ch3\u003eSuspension Secrets Adjustable Bump Steer Tie Rod Ends — Porsche 981 \/ 718 Cayman GTS\u003c\/h3\u003e\n\u003cp\u003eLowering the front ride height improves braking stability and turn-in response, but can create bump steer — leading to vague and inaccurate steering when pushing hard on track.\u003c\/p\u003e\n\u003cp\u003eThese fully adjustable tie rod ends can be shimmed to eliminate bump steer completely.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eImproved steering accuracy\u003c\/li\u003e\n\u003cli\u003eRemoval of bump steer\u003c\/li\u003e\n\u003cli\u003eReduced understeer\u003c\/li\u003e\n\u003cli\u003eEnables a lower front ride height on track without inducing bump steer\u003c\/li\u003e\n\u003cli\u003eFully adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 981 and 718 Cayman GTS.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrice includes applicable US import tariffs and fees for this UK-manufactured product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Suspension Secrets","offers":[{"title":"Default Title","offer_id":52622873362730,"sku":"SS-CAYGTS-BSTRE","price":654.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/IMG_7008a_7c05ba1c-a2b2-459c-82f0-2b191807465d.jpg?v=1789580338"},{"product_id":"suspension-secrets-solid-control-arm-bushes-porsche-981-718-cayman-gts","title":"Suspension Secrets Solid Control Arm Bushes - Porsche 981\/718 Cayman GTS","description":"\u003ch3\u003eSuspension Secrets Solid Control Arm Bushes — Porsche 981 \/ 718 Cayman GTS\u003c\/h3\u003e\n\u003cp\u003eImprove steering accuracy and braking stability. The standard control arm bushes are rubber, which flexes during cornering and braking — resulting in vague steering feel and instability under braking.\u003c\/p\u003e\n\u003cp\u003eMachined aluminum bushes replace the original Porsche rubber bushes. Being solid, they don't flex during fast driving, delivering more accurate and communicative steering along with increased braking stability.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 981 and 718 Cayman GTS.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrice includes applicable US import tariffs and fees for this UK-manufactured product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Suspension Secrets","offers":[{"title":"Default Title","offer_id":52622876279082,"sku":"SS-CAYGTS-SCAB","price":320.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/IMG_7018a_4006ecd3-1d3b-4195-804c-0a6a00f1fd08.jpg?v=1789580363"},{"product_id":"suspension-secrets-lower-control-arm-inner-monoball-porsche-981-718-cayman-gts","title":"Suspension Secrets Lower Control Arm Inner Monoball - Porsche 981\/718 Cayman GTS","description":"\u003ch3\u003eSuspension Secrets Lower Control Arm Inner Monoball — Porsche 981 \/ 718 Cayman GTS\u003c\/h3\u003e\n\u003cp\u003eIncrease chassis rigidity and sharpness. The standard inner suspension bushes are pliable rubber, which flexes when driving quickly — causing suspension geometry to change and the car to feel sloppy and vague.\u003c\/p\u003e\n\u003cp\u003eBillet aluminum monoballs replace the OEM rubber bushes, so the suspension isn't deflected when driving hard.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased chassis rigidity\u003c\/li\u003e\n\u003cli\u003eReduced geometry change when cornering\u003c\/li\u003e\n\u003cli\u003eImproved steering sharpness and chassis feedback\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 981 and 718 Cayman GTS.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrice includes applicable US import tariffs and fees for this UK-manufactured product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Suspension Secrets","offers":[{"title":"Default Title","offer_id":52622879981866,"sku":"SS-CAYGTS-LCAIM","price":516.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/IMG_7020a_982ce841-85ab-4460-8898-d7be6c17e67e.jpg?v=1789580387"},{"product_id":"girodisc-porsche-718-cayman-gt4-rs-982-excl-pccb-slotted-front-rotors","title":"GiroDisc Porsche 718 Cayman GT4 RS (982) excl PCCB Slotted Front Rotors","description":"\u003cp\u003eGiroDisc two-piece slotted front rotors for the Porsche 718 Cayman GT4 RS (982) excl PCCB. These replace the factory one-piece front rotors with a lighter, rebuildable floating assembly built for repeated track use.\u003c\/p\u003e\u003ch3\u003eWhy a GiroDisc two-piece rotor\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloating two-piece design.\u003c\/strong\u003e A cast iron disc ring is mounted to a central hat with high-strength alloy steel drive pins, so the ring can expand axially and radially with heat instead of fighting the hat. Anti-noise spring washers keep the float silent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6061-T6 aluminum hat.\u003c\/strong\u003e The hat is machined from U.S.-sourced 6061-T6 aircraft-specification aluminum, cutting rotating and unsprung weight against the one-piece factory casting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved internal vanes\u003c\/strong\u003e act as a centrifugal pump, forcing cooling air through the disc on track.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted, not cross-drilled.\u003c\/strong\u003e Slots sweep the pad face clean without the stress risers that make drilled rotors crack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRebuildable.\u003c\/strong\u003e When the iron is worn out you replace the rings only and keep the hats and hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Porsche 718 Cayman\/Boxster\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e A1-291\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePriced and sold as a pair — one complete front axle set.\u003c\/li\u003e\n\u003cli\u003eTwo-piece rotor assemblies with aluminum hats, iron rings and all mounting hardware, assembled and ready to bolt on.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can bed the system in and \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787516244266,"sku":"girA1-291","price":1950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/408mm72v__16593.1677861783.jpg?v=1790619267"},{"product_id":"girodisc-porsche-cayman-gt4-clubsport-slotted-front-rotors","title":"GiroDisc Porsche Cayman GT4 Clubsport Slotted Front Rotors","description":"\u003cp\u003eGiroDisc two-piece slotted front rotors for the Porsche Cayman GT4 Clubsport. These replace the factory one-piece front rotors with a lighter, rebuildable floating assembly built for repeated track use.\u003c\/p\u003e\u003ch3\u003eWhy a GiroDisc two-piece rotor\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloating two-piece design.\u003c\/strong\u003e A cast iron disc ring is mounted to a central hat with high-strength alloy steel drive pins, so the ring can expand axially and radially with heat instead of fighting the hat. Anti-noise spring washers keep the float silent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6061-T6 aluminum hat.\u003c\/strong\u003e The hat is machined from U.S.-sourced 6061-T6 aircraft-specification aluminum, cutting rotating and unsprung weight against the one-piece factory casting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved internal vanes\u003c\/strong\u003e act as a centrifugal pump, forcing cooling air through the disc on track.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted, not cross-drilled.\u003c\/strong\u003e Slots sweep the pad face clean without the stress risers that make drilled rotors crack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRebuildable.\u003c\/strong\u003e When the iron is worn out you replace the rings only and keep the hats and hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Porsche 718 Cayman\/Boxster\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e A1-266\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePriced and sold as a pair — one complete front axle set.\u003c\/li\u003e\n\u003cli\u003eTwo-piece rotor assemblies with aluminum hats, iron rings and all mounting hardware, assembled and ready to bolt on.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can bed the system in and \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787522437418,"sku":"girA1-266","price":1750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/408mm72v__89090.1677861591.jpg?v=1790619291"},{"product_id":"girodisc-porsche-cayman-gt4-clubsport-slotted-rear-rotors","title":"GiroDisc Porsche Cayman GT4 Clubsport Slotted Rear Rotors","description":"\u003cp\u003eGiroDisc two-piece slotted rear rotors for the Porsche Cayman GT4 Clubsport. These replace the factory one-piece rear rotors with a lighter, rebuildable floating assembly built for repeated track use.\u003c\/p\u003e\u003ch3\u003eWhy a GiroDisc two-piece rotor\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloating two-piece design.\u003c\/strong\u003e A cast iron disc ring is mounted to a central hat with high-strength alloy steel drive pins, so the ring can expand axially and radially with heat instead of fighting the hat. Anti-noise spring washers keep the float silent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6061-T6 aluminum hat.\u003c\/strong\u003e The hat is machined from U.S.-sourced 6061-T6 aircraft-specification aluminum, cutting rotating and unsprung weight against the one-piece factory casting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved internal vanes\u003c\/strong\u003e act as a centrifugal pump, forcing cooling air through the disc on track.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted, not cross-drilled.\u003c\/strong\u003e Slots sweep the pad face clean without the stress risers that make drilled rotors crack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRebuildable.\u003c\/strong\u003e When the iron is worn out you replace the rings only and keep the hats and hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Porsche 718 Cayman\/Boxster\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e A2-266\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePriced and sold as a pair — one complete rear axle set.\u003c\/li\u003e\n\u003cli\u003eTwo-piece rotor assemblies with aluminum hats, iron rings and all mounting hardware, assembled and ready to bolt on.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can bed the system in and \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787531907370,"sku":"girA2-266","price":1750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/408mm72v__64267.1677861729.jpg?v=1790619794"},{"product_id":"girodisc-porsche-718-cayman-boxster-s-gts-982-slotted-front-rings","title":"GiroDisc Porsche 718 Cayman\/Boxster S\/GTS (982) Slotted Front Rings","description":"\u003cp\u003eGiroDisc replacement cast iron rotor rings for the Porsche 718 Cayman\/Boxster S\/GTS (982), front axle. When the iron is worn or heat-checked, you replace the rings and keep the hats — the reason a two-piece rotor is cheaper to own over time.\u003c\/p\u003e\u003ch3\u003eAbout replacement rings\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRings only — \u003cstrong\u003ealuminum hats are not included\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eNew installation hardware (cap screws, hardened washers and anti-noise spring washers) is supplied. GiroDisc does not recommend reusing old hardware.\u003c\/li\u003e\n\u003cli\u003eSlotted friction surface with curved internal cooling vanes, same specification as the original assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThese rings are machined for GiroDisc hats and will not mount to factory center hats.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Porsche 718 Cayman\/Boxster\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e D1-203\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePriced and sold as a pair — one axle set of rings, plus new mounting hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can bed the system in and \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787555369258,"sku":"girD1-203","price":880.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/rings__40536.1689725195.jpg?v=1790620149"}],"url":"https:\/\/team-anbd.com\/collections\/porsche-718-cayman-boxster.oembed?page=2","provider":"Team ANBD","version":"1.0","type":"link"}