{"title":"Mercedes-AMG A45 \/ CLA45 \/ GLA45 Performance Parts","description":"\u003cp\u003eParts confirmed to fit the Mercedes-AMG A45, CLA45 and GLA45.\u003c\/p\u003e\u003cp\u003eThe largest group is brakes: brake rotors, brake pads, replacement rotor rings and stainless brake lines. You will also find suspension (lowering springs, sway bars and coilovers). Brands include H\u0026amp;R, DBA, GiroDisc, EBC, Goodridge and Hawk.\u003c\/p\u003e\u003cp\u003eCheck the chassis code on each listing (W176, C117 and X156, or the later C118). Parts are not shared between generations unless the listing says so. Installation available at our shop in Andover, NJ.\u003c\/p\u003e","products":[{"product_id":"girodisc-14-18-mercedes-benz-a45-cla45-gla45-amg-w176-c117-x117-slotted-front-rotors","title":"GiroDisc 14-18 Mercedes-Benz A45\/CLA45\/GLA45 AMG (W176\/C117\/X117) Slotted Front Rotors","description":"\u003cp\u003eGiroDisc two-piece slotted front rotors for the 14-18 Mercedes-Benz A45\/CLA45\/GLA45 AMG (W176\/C117\/X117). These replace the factory one-piece front rotors with a lighter, rebuildable floating assembly built for repeated track use.\u003c\/p\u003e\u003ch3\u003eWhy a GiroDisc two-piece rotor\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloating two-piece design.\u003c\/strong\u003e A cast iron disc ring is mounted to a central hat with high-strength alloy steel drive pins, so the ring can expand axially and radially with heat instead of fighting the hat. Anti-noise spring washers keep the float silent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6061-T6 aluminum hat.\u003c\/strong\u003e The hat is machined from U.S.-sourced 6061-T6 aircraft-specification aluminum, cutting rotating and unsprung weight against the one-piece factory casting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved internal vanes\u003c\/strong\u003e act as a centrifugal pump, forcing cooling air through the disc on track.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted, not cross-drilled.\u003c\/strong\u003e Slots sweep the pad face clean without the stress risers that make drilled rotors crack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRebuildable.\u003c\/strong\u003e When the iron is worn out you replace the rings only and keep the hats and hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 14-18 Mercedes-Benz A45\/CLA45\/GLA45 AMG (W176\/C117\/X117)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e A1-310\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant fitment notes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eW176\/C117\/X117.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePriced and sold as a pair — one complete front axle set.\u003c\/li\u003e\n\u003cli\u003eTwo-piece rotor assemblies with aluminum hats, iron rings and all mounting hardware, assembled and ready to bolt on.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787568017706,"sku":"girA1-310","price":1150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/408mm72v_0020__09130.1686164523.jpg?v=1790618990"},{"product_id":"girodisc-14-18-mercedes-benz-a45-cla45-gla45-amg-w176-c117-x117-slotted-front-rings","title":"GiroDisc 14-18 Mercedes-Benz A45\/CLA45\/GLA45 AMG (W176\/C117\/X117) Slotted Front Rings","description":"\u003cp\u003eGiroDisc replacement cast iron rotor rings for the 14-18 Mercedes-Benz A45\/CLA45\/GLA45 AMG (W176\/C117\/X117), front axle. When the iron is worn or heat-checked, you replace the rings and keep the hats — the reason a two-piece rotor is cheaper to own over time.\u003c\/p\u003e\u003ch3\u003eAbout replacement rings\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRings only — \u003cstrong\u003ealuminum hats are not included\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eNew installation hardware (cap screws, hardened washers and anti-noise spring washers) is supplied. GiroDisc does not recommend reusing old hardware.\u003c\/li\u003e\n\u003cli\u003eSlotted friction surface with curved internal cooling vanes, same specification as the original assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThese rings are machined for GiroDisc hats and will not mount to factory center hats.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 14-18 Mercedes-Benz A45\/CLA45\/GLA45 AMG (W176\/C117\/X117)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e D1-310\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant fitment notes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eW176\/C117\/X117.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePriced and sold as a pair — one axle set of rings, plus new mounting hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787568050474,"sku":"girD1-310","price":780.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/GD355.35.52_006__17371.1697065123.jpg?v=1790619964"},{"product_id":"goodridge-gri34022-mercedes-a45-cla45-amg-brake-lines","title":"Goodridge 13-18 Mercedes-Benz A 45 \/ CLA 45 AMG (All Models) Stainless Steel Brake Line Kit","description":"\u003cp\u003e13-18 Mercedes-Benz A 45 \/ CLA 45 AMG (All Models) braided stainless steel brake line kit from Goodridge. PTFE inner liner with a stainless steel outer braid, DOT compliant, 90-day Goodridge warranty.\u003c\/p\u003e\u003cp\u003eHelps remove pedal sponginess and gives a more consistent pedal under hard braking. \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your car and trim and we will confirm fitment before you order.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/small\u003e\u003c\/p\u003e","brand":"Goodridge","offers":[{"title":"Default Title","offer_id":52926192189738,"sku":"gri34022","price":171.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/02c3bd86b33f32c783346e69f7421489.jpg?v=1791861288"},{"product_id":"hawk-hps-5-0-front-brake-pads-14-17-mercedes-benz-cla-45-amg-15-17-mercedes-benz-gla-45-amg-hb795b-618","title":"Hawk HPS 5.0 Front Brake Pads - 2014-2017 Mercedes-Benz CLA 45 AMG \/ 2015-2017 Mercedes-Benz GLA 45 AMG (HB795B.618)","description":"\u003cp\u003eHawk HPS 5.0 front brake pads for the 2014-2017 Mercedes-Benz CLA 45 AMG \/ 2015-2017 Mercedes-Benz GLA 45 AMG. Aggressive torque, great rotor and pad wear life, smooth and predictable control, and consistent release for big motors and high deceleration rates.\u003c\/p\u003e\u003cp\u003eSee the \u003ca href=\"\/pages\/hawk-brake-pad-compounds\"\u003eHawk compound guide\u003c\/a\u003e. Please confirm fitment: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e with your car, year and caliper. Installation available at our shop in Andover, NJ.\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":52928114622762,"sku":"hawkHB795B.618","price":203.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/4317ee8243bfd1a7997d04f1bd641ff5_09cfd345-8acc-48ec-9516-3d050085b310.jpg?v=1791905456"},{"product_id":"dba42698s-mercedes-amg-a45-cla45-gla45-4000-series-t3-slotted-front-brake-rotor","title":"DBA Mercedes-AMG A45 \/ CLA45 \/ GLA45 4000 Series T3 Slotted Front Brake Rotor (DBA42698S)","description":"\u003cp\u003eThe DBA 4000 Series T3 Slotted front rotor for the Mercedes-AMG A45 \/ CLA45 \/ GLA45 is built by Disc Brakes Australia (DBA), a specialist rotor maker with more than 45 years in the business. This one has DBA's T3 slot pattern: precision CNC-machined slots, with more exit points for pad dust and gas than the T2, for a quieter, more consistent pedal. DBA rotors are sold individually, so order two for a full axle set.\u003c\/p\u003e\u003ch3\u003eRotor details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one-piece vented rotor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e DBA 4000 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace:\u003c\/strong\u003e slotted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter diameter:\u003c\/strong\u003e 350 mm (13.78 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 32 mm (1.26 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall height:\u003c\/strong\u003e 51 mm (2.01 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter bore:\u003c\/strong\u003e 67.02 mm (2.64 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually (one rotor per part number)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Mercedes-AMG A45 \/ CLA45 \/ GLA45\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDBA part number:\u003c\/strong\u003e DBA42698S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listed by DBA:\u003c\/strong\u003e 2012+ Mercedes Benz A45 AMG 4000 Series Slotted Front Brake Rotor\u003c\/li\u003e\n\u003cli\u003eBrake packages and rotor sizes vary within a model line, so compare this rotor's 350 mm diameter with your current rotor before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout the DBA 4000 Series\u003c\/h3\u003e\u003cp\u003eThe 4000 Series is DBA's one-piece performance upgrade. It is cast from XG-150 high-carbon alloyed iron and put through Thermal Stability Profiling (TSP), so the rotor copes with repeated heat cycles in hard braking. Vented versions use DBA's Kangaroo Paw vane layout (144 diamond and teardrop-shaped pillars), which DBA says adds surface area and cooling efficiency compared with a straight-vane design.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eDBA rotors are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"DBA","offers":[{"title":"Default Title","offer_id":52936678703402,"sku":"dbaDBA42698S","price":309.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/4b56f165a30e28983a6c5c024d6931a7.jpg?v=1791955212"},{"product_id":"dba42698xd-mercedes-amg-a45-cla45-gla45-4000-series-xd-drilled-and-dimpled-front-brake-rotor","title":"DBA Mercedes-AMG A45 \/ CLA45 \/ GLA45 4000 Series XD Drilled \u0026 Dimpled Front Brake Rotor (DBA42698XD)","description":"\u003cp\u003eThe DBA 4000 Series XD Drilled \u0026amp; Dimpled front rotor for the Mercedes-AMG A45 \/ CLA45 \/ GLA45 is built by Disc Brakes Australia (DBA), a specialist rotor maker with more than 45 years in the business. This one has DBA's XD pattern: a non-directional cross-drilled and dimpled face that adds cooling over the plain HD finish while keeping more structural support than a drilled-only rotor. DBA rotors are sold individually, so order two for a full axle set.\u003c\/p\u003e\u003ch3\u003eRotor details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one-piece vented rotor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e DBA 4000 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace:\u003c\/strong\u003e drilled \u0026amp; dimpled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter diameter:\u003c\/strong\u003e 350 mm (13.78 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 32 mm (1.26 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall height:\u003c\/strong\u003e 51 mm (2.01 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter bore:\u003c\/strong\u003e 67.02 mm (2.64 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually (one rotor per part number)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Mercedes-AMG A45 \/ CLA45 \/ GLA45\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDBA part number:\u003c\/strong\u003e DBA42698XD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listed by DBA:\u003c\/strong\u003e 14-20 Mercedes-Benz CLA45 AMG (350mm Front Rotor) Front 4000 Series Cross Drilled Rotor\u003c\/li\u003e\n\u003cli\u003eBrake packages and rotor sizes vary within a model line, so compare this rotor's 350 mm diameter with your current rotor before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout the DBA 4000 Series\u003c\/h3\u003e\u003cp\u003eThe 4000 Series is DBA's one-piece performance upgrade. It is cast from XG-150 high-carbon alloyed iron and put through Thermal Stability Profiling (TSP), so the rotor copes with repeated heat cycles in hard braking. Vented versions use DBA's Kangaroo Paw vane layout (144 diamond and teardrop-shaped pillars), which DBA says adds surface area and cooling efficiency compared with a straight-vane design.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eDBA rotors are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"DBA","offers":[{"title":"Default Title","offer_id":52936678736170,"sku":"dbaDBA42698XD","price":344.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/1c36c9c76ea35621d8ba8006055fbd66.jpg?v=1791955213"},{"product_id":"dba2698s-mercedes-amg-a45-cla45-gla45-street-series-t2-slotted-front-brake-rotor","title":"DBA Mercedes-AMG A45 \/ CLA45 \/ GLA45 Street Series T2 Slotted Front Brake Rotor (DBA2698S)","description":"\u003cp\u003eThe DBA Street Series T2 Slotted front rotor for the Mercedes-AMG A45 \/ CLA45 \/ GLA45 is built by Disc Brakes Australia (DBA), a specialist rotor maker with more than 45 years in the business. This one has DBA's T2 slot pattern: CNC-machined slots that give pad dust and gas more places to escape, for a quieter, smoother pedal feel. DBA rotors are sold individually, so order two for a full axle set.\u003c\/p\u003e\u003ch3\u003eRotor details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one-piece vented rotor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e DBA Street Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace:\u003c\/strong\u003e slotted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter diameter:\u003c\/strong\u003e 350 mm (13.78 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 32 mm (1.26 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall height:\u003c\/strong\u003e 51 mm (2.01 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter bore:\u003c\/strong\u003e 67.02 mm (2.64 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually (one rotor per part number)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Mercedes-AMG A45 \/ CLA45 \/ GLA45\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDBA part number:\u003c\/strong\u003e DBA2698S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listed by DBA:\u003c\/strong\u003e 15-20 Mercedes-Benz CLA45 AMG (350mm Front Rotor) Front Slotted Street Series Rotor\u003c\/li\u003e\n\u003cli\u003eBrake packages and rotor sizes vary within a model line, so compare this rotor's 350 mm diameter with your current rotor before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout the DBA Street Series\u003c\/h3\u003e\u003cp\u003eStreet Series is DBA's OE-replacement line: Australian-engineered rotors made to OE standards, finished with a protective paint coating and machined with CBN (cubic boron nitride) tooling for tight thickness variation and parallelism, which reduces the chance of brake shudder.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eDBA rotors are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"DBA","offers":[{"title":"Default Title","offer_id":52936694300970,"sku":"dbaDBA2698S","price":256.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/e93c112ab3499c01d643af1c5118e206.jpg?v=1791955709"},{"product_id":"dba2699s-mercedes-amg-a45-cla45-gla45-street-series-t2-slotted-rear-brake-rotor","title":"DBA Mercedes-AMG A45 \/ CLA45 \/ GLA45 Street Series T2 Slotted Rear Brake Rotor (DBA2699S)","description":"\u003cp\u003eThe DBA Street Series T2 Slotted rear rotor for the Mercedes-AMG A45 \/ CLA45 \/ GLA45 is built by Disc Brakes Australia (DBA), a specialist rotor maker with more than 45 years in the business. This one has DBA's T2 slot pattern: CNC-machined slots that give pad dust and gas more places to escape, for a quieter, smoother pedal feel. DBA rotors are sold individually, so order two for a full axle set.\u003c\/p\u003e\u003ch3\u003eRotor details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one-piece vented rotor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e DBA Street Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace:\u003c\/strong\u003e slotted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter diameter:\u003c\/strong\u003e 330 mm (12.99 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 22 mm (0.87 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall height:\u003c\/strong\u003e 41.6 mm (1.64 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter bore:\u003c\/strong\u003e 67.02 mm (2.64 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually (one rotor per part number)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Mercedes-AMG A45 \/ CLA45 \/ GLA45\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDBA part number:\u003c\/strong\u003e DBA2699S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listed by DBA:\u003c\/strong\u003e 14-20 Mercedes-Benz CLA45 AMG Rear Slotted Street Series Rotor\u003c\/li\u003e\n\u003cli\u003eBrake packages and rotor sizes vary within a model line, so compare this rotor's 330 mm diameter with your current rotor before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout the DBA Street Series\u003c\/h3\u003e\u003cp\u003eStreet Series is DBA's OE-replacement line: Australian-engineered rotors made to OE standards, finished with a protective paint coating and machined with CBN (cubic boron nitride) tooling for tight thickness variation and parallelism, which reduces the chance of brake shudder.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eDBA rotors are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"DBA","offers":[{"title":"Default Title","offer_id":52936694333738,"sku":"dbaDBA2699S","price":168.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/bf79eb67b5f93427ddd0828461263213_4cfe5178-d8ba-4d8d-9530-3dbc26d8d158.jpg?v=1791955710"},{"product_id":"dba42698-mercedes-amg-a45-cla45-gla45-4000-series-hd-plain-front-brake-rotor","title":"DBA Mercedes-AMG A45 \/ CLA45 \/ GLA45 4000 Series HD Plain Front Brake Rotor (DBA42698)","description":"\u003cp\u003eThe DBA 4000 Series HD Plain front rotor for the Mercedes-AMG A45 \/ CLA45 \/ GLA45 is built by Disc Brakes Australia (DBA), a specialist rotor maker with more than 45 years in the business. This one has the HD finish, a smooth OE-style face for drivers who want 4000 Series strength without a drilled or slotted look (it also suits race classes that require an OE-style rotor). DBA rotors are sold individually, so order two for a full axle set.\u003c\/p\u003e\u003ch3\u003eRotor details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one-piece vented rotor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e DBA 4000 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace:\u003c\/strong\u003e plain (smooth)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter diameter:\u003c\/strong\u003e 350 mm (13.78 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 32 mm (1.26 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall height:\u003c\/strong\u003e 51 mm (2.01 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter bore:\u003c\/strong\u003e 67.02 mm (2.64 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually (one rotor per part number)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Mercedes-AMG A45 \/ CLA45 \/ GLA45\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDBA part number:\u003c\/strong\u003e DBA42698\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listed by DBA:\u003c\/strong\u003e 14-19 Mercedes-Benz CLA45 AMG (w\/350mm Front Rotor) Front 4000 Series Plain Rotor\u003c\/li\u003e\n\u003cli\u003eBrake packages and rotor sizes vary within a model line, so compare this rotor's 350 mm diameter with your current rotor before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout the DBA 4000 Series\u003c\/h3\u003e\u003cp\u003eThe 4000 Series is DBA's one-piece performance upgrade. It is cast from XG-150 high-carbon alloyed iron and put through Thermal Stability Profiling (TSP), so the rotor copes with repeated heat cycles in hard braking. Vented versions use DBA's Kangaroo Paw vane layout (144 diamond and teardrop-shaped pillars), which DBA says adds surface area and cooling efficiency compared with a straight-vane design.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eDBA rotors are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"DBA","offers":[{"title":"Default Title","offer_id":52936700690730,"sku":"dbaDBA42698","price":264.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/cbfc0232fc039a3f8e6cad3ddede829b.jpg?v=1791955986"},{"product_id":"ebcdp32311c-mercedes-amg-cla45-redstuff-ceramic-low-dust-front-brake-pads","title":"EBC Mercedes-AMG CLA45 Redstuff Ceramic Low-Dust Front Brake Pads (DP32311C)","description":"\u003cp\u003eThe EBC Redstuff Ceramic Low-Dust front brake pad set for the Mercedes-AMG CLA45 is made by EBC Brakes and is intended for fast street driving (low dust). Pads are sold as a set for one axle, so this part number covers the front axle only.\u003c\/p\u003e\u003ch3\u003ePad details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompound:\u003c\/strong\u003e EBC Redstuff (3000 Series, ceramic)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntended use:\u003c\/strong\u003e fast street driving (low dust)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e as a set for one axle (one part number per axle)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot included:\u003c\/strong\u003e mounting hardware, abutment clips and brake lubricant\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Mercedes-AMG CLA45\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEBC part number:\u003c\/strong\u003e DP32311C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listed by EBC:\u003c\/strong\u003e 2014+ Mercedes-Benz CLA45 AMG 2.0L Turbo Redstuff Front Brake Pads\u003c\/li\u003e\n\u003cli\u003eBrake packages vary within a model line, so compare your current pads and caliper with the application above before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout EBC Redstuff\u003c\/h3\u003e\u003cp\u003eRedstuff is EBC's 3000 Series ceramic street pad. It uses a full ceramic-based formula with no steel fibers, which EBC describes as the lowest-dust pad in its range, with good cold bite and a firm pedal feel across its temperature range. It is aimed at fast street driving on performance and premium cars.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEBC pads are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We fit brake pads and bleed the system in house, \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e, and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":52939375018282,"sku":"ebcDP32311C","price":342.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/bd40b34802493674d20a1bdee8dd96c7L_8ef390ab-9df0-43f4-9d63-5743baf28f88.jpg?v=1791987152"},{"product_id":"ebcdp42311r-mercedes-amg-cla45-yellowstuff-4000-series-front-brake-pads","title":"EBC Mercedes-AMG CLA45 Yellowstuff 4000 Series Front Brake Pads, 13.8 in Rotors (DP42311R)","description":"\u003cp\u003eThe EBC Yellowstuff 4000 Series front brake pad set for the Mercedes-AMG CLA45, 13.8 in Rotors is made by EBC Brakes and is intended for street and track driving. Pads are sold as a set for one axle, so this part number covers the front axle only.\u003c\/p\u003e\u003ch3\u003ePad details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompound:\u003c\/strong\u003e EBC Yellowstuff (4000 Series, aramid fiber)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntended use:\u003c\/strong\u003e street and track driving\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e as a set for one axle (one part number per axle)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot included:\u003c\/strong\u003e mounting hardware, abutment clips and brake lubricant\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Mercedes-AMG CLA45 — 13.8 in Rotors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEBC part number:\u003c\/strong\u003e DP42311R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listed by EBC:\u003c\/strong\u003e 14-18 Mercedes CLA45 AMG w\/13.8in Front Rotors Yellowstuff Front Brake Pads\u003c\/li\u003e\n\u003cli\u003eBrake packages vary within a model line, so compare your current pads and caliper with the application above before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout EBC Yellowstuff\u003c\/h3\u003e\u003cp\u003eYellowstuff is EBC's 4000 Series pad, built on an aramid-fiber compound for street and track driving. EBC says it brakes strongly from cold with no warm-up needed and gets stronger as it heats up in hard driving. It is not a low-dust pad; EBC points drivers who want low dust to Redstuff.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEBC pads are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We fit brake pads and bleed the system in house, \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e, and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":52939375083818,"sku":"ebcDP42311R","price":342.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/696be41fe38932a53034f47ddfcf12c6L_a7a290e3-262e-438c-a2d7-a2e92a7a4857.jpg?v=1791987153"},{"product_id":"hr28809-3-sport-springs-for-2015-2019-mercedes-benz-gla45-amg-x156","title":"H\u0026R Sport Springs for 2015–2019 Mercedes-Benz GLA45 AMG X156 (28809-3)","description":"\u003cp\u003eThese H\u0026amp;R Sport Springs are listed for the 2015–2019 Mercedes-Benz GLA45 AMG X156. Part 28809-3.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct line:\u003c\/strong\u003e Sport Springs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart type:\u003c\/strong\u003e Lowering springs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront lowering (approx.):\u003c\/strong\u003e 1.0 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear lowering (approx.):\u003c\/strong\u003e 0.6 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2015–2019 Mercedes-Benz GLA45 AMG X156\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2015–2019 Mercedes-Benz GLA45 AMG 4Matic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH\u0026amp;R part number:\u003c\/strong\u003e 28809-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e 15-19 Mercedes-Benz GLA45 AMG X156 Sport Spring\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout H\u0026amp;R Sport Springs\u003c\/h3\u003e\u003cp\u003eH\u0026amp;R Sport Springs are progressive-rate lowering springs made in Germany from 54SiCr6 spring steel, shot peened and block set. H\u0026amp;R sells them as its best-selling product and aims for a lower stance and less body roll without a harsh ride.\u003c\/p\u003e\u003cp\u003eH\u0026amp;R makes its springs, coilovers, sway bars and cup kits in Germany and describes its factory as ISO 9001 certified.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eH\u0026amp;R parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":52954342392106,"sku":"hr28809-3","price":415.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5724c25449fbcf199f7c53bd9748e00eL_79d3fa29-d14f-4825-a9b5-379c5175d62e.jpg?v=1792077219"},{"product_id":"hr28657-2-sport-springs-for-2019-2021-mercedes-benz-amg-cla35-amg-cla45-coupe-c118-w-adaptive-damping","title":"H\u0026R Sport Springs for 2019–2021 Mercedes-Benz AMG CLA35\/AMG CLA45 Coupe C118 – w\/Adaptive Damping (28657-2)","description":"\u003cp\u003eThese H\u0026amp;R Sport Springs are listed for the 2019–2021 Mercedes-Benz AMG CLA35\/AMG CLA45 Coupe C118. Part 28657-2.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct line:\u003c\/strong\u003e Sport Springs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart type:\u003c\/strong\u003e Lowering springs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront lowering (approx.):\u003c\/strong\u003e 1 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear lowering (approx.):\u003c\/strong\u003e 1 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication note (distributor):\u003c\/strong\u003e w\/Adaptive Damping\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2019–2021 Mercedes-Benz AMG CLA35\/AMG CLA45 Coupe C118\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2020–2021 Mercedes-Benz A35 AMG 4Matic; 2020–2021 Mercedes-Benz CLA35 AMG 4Matic; 2019–2021 Mercedes-Benz CLA45 AMG 4Matic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH\u0026amp;R part number:\u003c\/strong\u003e 28657-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e 19-21 Mercedes-Benz AMG CLA35\/AMG CLA45 Coupe C118 Sport Spring (w\/Adaptive Damping)\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout H\u0026amp;R Sport Springs\u003c\/h3\u003e\u003cp\u003eH\u0026amp;R Sport Springs are progressive-rate lowering springs made in Germany from 54SiCr6 spring steel, shot peened and block set. H\u0026amp;R sells them as its best-selling product and aims for a lower stance and less body roll without a harsh ride.\u003c\/p\u003e\u003cp\u003eH\u0026amp;R makes its springs, coilovers, sway bars and cup kits in Germany and describes its factory as ISO 9001 certified.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eH\u0026amp;R parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":52954434404650,"sku":"hr28657-2","price":424.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/629fb4e9a5532363001c4b965ed58c49L.jpg?v=1792077380"},{"product_id":"hr28858-3-sport-springs-for-2015-2019-mercedes-benz-amg-cla45-4matic-c117","title":"H\u0026R Sport Springs for 2015–2019 Mercedes-Benz AMG CLA45 4MATIC C117 (28858-3)","description":"\u003cp\u003eThese H\u0026amp;R Sport Springs are listed for the 2015–2019 Mercedes-Benz AMG CLA45 4MATIC C117. Part 28858-3.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct line:\u003c\/strong\u003e Sport Springs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart type:\u003c\/strong\u003e Lowering springs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront lowering (approx.):\u003c\/strong\u003e 1.0 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear lowering (approx.):\u003c\/strong\u003e 1.0 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2015–2019 Mercedes-Benz AMG CLA45 4MATIC C117\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2015–2019 Mercedes-Benz CLA45 AMG 4Matic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH\u0026amp;R part number:\u003c\/strong\u003e 28858-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e 15-19 Mercedes-Benz AMG CLA45 4MATIC C117 Sport Spring\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout H\u0026amp;R Sport Springs\u003c\/h3\u003e\u003cp\u003eH\u0026amp;R Sport Springs are progressive-rate lowering springs made in Germany from 54SiCr6 spring steel, shot peened and block set. H\u0026amp;R sells them as its best-selling product and aims for a lower stance and less body roll without a harsh ride.\u003c\/p\u003e\u003cp\u003eH\u0026amp;R makes its springs, coilovers, sway bars and cup kits in Germany and describes its factory as ISO 9001 certified.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eH\u0026amp;R parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":52954600964394,"sku":"hr28858-3","price":339.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5724c25449fbcf199f7c53bd9748e00eL_4155d2d1-cda8-4049-ab8f-c94862be1335.jpg?v=1792077675"},{"product_id":"hr70849-30-mm-adjustable-front-sway-bar-for-2015-2019-mercedes-benz-gla45-amg","title":"H\u0026R 30 mm Adjustable Front Sway Bar for 2015–2019 Mercedes-Benz GLA45 AMG (70849)","description":"\u003cp\u003eThis H\u0026amp;R 30 mm Adjustable Front Sway Bar is listed for the 2015–2019 Mercedes-Benz GLA45 AMG. Part 70849.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct line:\u003c\/strong\u003e Sway Bars\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart type:\u003c\/strong\u003e Sway bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar diameter:\u003c\/strong\u003e 30 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustability:\u003c\/strong\u003e Adjustable, 2-hole\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2015–2019 Mercedes-Benz GLA45 AMG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2015–2019 Mercedes-Benz CLA250 4Matic; 2015–2019 Mercedes-Benz CLA250 Base; 2015–2019 Mercedes-Benz GLA250 4Matic; 2015–2019 Mercedes-Benz GLA250 Base; 2015–2019 Mercedes-Benz GLA45 AMG 4Matic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH\u0026amp;R part number:\u003c\/strong\u003e 70849\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e 15-19 Mercedes-Benz GLA45 AMG 30mm Adj. 2 Hole Sway Bar - Front\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout H\u0026amp;R Sway Bars\u003c\/h3\u003e\u003cp\u003eH\u0026amp;R sport sway bars raise roll stiffness for sharper cornering without lowering the car or changing ride quality. They are made in Germany from 50CrV4 steel, heat treated, shot peened and powder coated, and where listed use urethane\/Teflon composite bushings that need no lubrication.\u003c\/p\u003e\u003cp\u003eH\u0026amp;R makes its springs, coilovers, sway bars and cup kits in Germany and describes its factory as ISO 9001 certified.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eH\u0026amp;R parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. We can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":52954968621354,"sku":"hr70849","price":422.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/7efd82bbc5acfec9e80b5ac57684f9d3L_4e6e956f-a0c8-4428-aa4a-afaf3af5409a.jpg?v=1792078361"},{"product_id":"hr71849-2-26-mm-adjustable-rear-sway-bar-for-2015-2019-mercedes-benz-gla45-amg","title":"H\u0026R 26 mm Adjustable Rear Sway Bar for 2015–2019 Mercedes-Benz GLA45 AMG (71849-2)","description":"\u003cp\u003eThis H\u0026amp;R 26 mm Adjustable Rear Sway Bar is listed for the 2015–2019 Mercedes-Benz GLA45 AMG. Part 71849-2.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct line:\u003c\/strong\u003e Sway Bars\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart type:\u003c\/strong\u003e Sway bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar diameter:\u003c\/strong\u003e 26 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustability:\u003c\/strong\u003e Adjustable, 2-hole\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2015–2019 Mercedes-Benz GLA45 AMG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2015–2019 Mercedes-Benz GLA250 4Matic; 2015–2019 Mercedes-Benz GLA250 Base; 2015–2019 Mercedes-Benz GLA45 AMG 4Matic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH\u0026amp;R part number:\u003c\/strong\u003e 71849-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e 15-19 Mercedes-Benz GLA45 AMG 26mm Adj. 2 Hole Sway Bar - Rear\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout H\u0026amp;R Sway Bars\u003c\/h3\u003e\u003cp\u003eH\u0026amp;R sport sway bars raise roll stiffness for sharper cornering without lowering the car or changing ride quality. They are made in Germany from 50CrV4 steel, heat treated, shot peened and powder coated, and where listed use urethane\/Teflon composite bushings that need no lubrication.\u003c\/p\u003e\u003cp\u003eH\u0026amp;R makes its springs, coilovers, sway bars and cup kits in Germany and describes its factory as ISO 9001 certified.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eH\u0026amp;R parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. We can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":52954968654122,"sku":"hr71849-2","price":386.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/7efd82bbc5acfec9e80b5ac57684f9d3L_d10cf986-1d45-4a7c-93f9-9dabf7c07e39.jpg?v=1792078362"},{"product_id":"hr72849-2-front-and-rear-sway-bar-kit-30-mm-front-26-mm-rear-for-2015-2019-mercedes-benz-gla45-amg","title":"H\u0026R Front and Rear Sway Bar Kit (30 mm Front \/ 26 mm Rear) for 2015–2019 Mercedes-Benz GLA45 AMG (72849-2)","description":"\u003cp\u003eThis H\u0026amp;R Front and Rear Sway Bar Kit (30 mm Front \/ 26 mm Rear) is listed for the 2015–2019 Mercedes-Benz GLA45 AMG. Part 72849-2.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct line:\u003c\/strong\u003e Sway Bars\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart type:\u003c\/strong\u003e Sway bar kit (front and rear)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront bar diameter:\u003c\/strong\u003e 30 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear bar diameter:\u003c\/strong\u003e 26 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2015–2019 Mercedes-Benz GLA45 AMG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2015–2019 Mercedes-Benz GLA250 4Matic; 2015–2019 Mercedes-Benz GLA250 Base; 2015–2019 Mercedes-Benz GLA45 AMG 4Matic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH\u0026amp;R part number:\u003c\/strong\u003e 72849-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e 15-19 Mercedes-Benz GLA45 AMG Sway Bar Kit 30mm Front \/ 26mm Rear\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout H\u0026amp;R Sway Bars\u003c\/h3\u003e\u003cp\u003eH\u0026amp;R sport sway bars raise roll stiffness for sharper cornering without lowering the car or changing ride quality. They are made in Germany from 50CrV4 steel, heat treated, shot peened and powder coated, and where listed use urethane\/Teflon composite bushings that need no lubrication.\u003c\/p\u003e\u003cp\u003eH\u0026amp;R makes its springs, coilovers, sway bars and cup kits in Germany and describes its factory as ISO 9001 certified.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eH\u0026amp;R parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. We can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":52954982875434,"sku":"hr72849-2","price":808.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/7efd82bbc5acfec9e80b5ac57684f9d3L_6312e168-8215-4e57-ac45-e5b9cc441253.jpg?v=1792078416"},{"product_id":"hr28849-2-street-performance-coilover-kit-for-2015-2019-mercedes-benz-amg-cla45-4matic-c117","title":"H\u0026R Street Performance Coilover Kit for 2015–2019 Mercedes-Benz AMG CLA45 4MATIC C117 (28849-2)","description":"\u003cp\u003eThis H\u0026amp;R Street Performance Coilover Kit is listed for the 2015–2019 Mercedes-Benz AMG CLA45 4MATIC C117. Part 28849-2.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct line:\u003c\/strong\u003e Street Performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart type:\u003c\/strong\u003e Coilover kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2015–2019 Mercedes-Benz AMG CLA45 4MATIC C117\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2015–2019 Mercedes-Benz CLA45 AMG 4Matic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH\u0026amp;R part number:\u003c\/strong\u003e 28849-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e 15-19 Mercedes-Benz AMG CLA45 4MATIC C117 Street Perf. Coil Over\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout H\u0026amp;R Street Performance Coilovers\u003c\/h3\u003e\u003cp\u003eH\u0026amp;R Street Performance Coilovers use a mono-tube gas shock paired with a progressive-rate spring tuned to the shock valving. A fully threaded shock body makes the ride height adjustable. H\u0026amp;R builds them for street use.\u003c\/p\u003e\u003cp\u003eH\u0026amp;R makes its springs, coilovers, sway bars and cup kits in Germany and describes its factory as ISO 9001 certified.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eH\u0026amp;R parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":52955041136938,"sku":"hr28849-2","price":1602.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/3f9f0372-5dd4-4535-8eb8-810824bad0ae-800.jpg?v=1792078701"},{"product_id":"ohlins-mes-mv10s1-road-and-track-coilover-kit-mercedes-amg-a45-w177","title":"Öhlins Road \u0026 Track Coilover Kit for Mercedes-AMG A45 (W177) (MES MV10S1)","description":"\u003cp\u003eThe Öhlins Road \u0026amp; Track coilover kit for the Mercedes-AMG A45 (W177) is Öhlins' dual-purpose suspension: comfortable enough for daily driving, with the traction and control to run on track days. Part MES MV10S1.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Öhlins Road \u0026amp; Track\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamper technology:\u003c\/strong\u003e DFV (Dual Flow Valve)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping adjustment:\u003c\/strong\u003e 1-way 25 click compression and rebound adjuster\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRide height:\u003c\/strong\u003e individual height adjustment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront:\u003c\/strong\u003e McPherson strut, monotube upside-down technology; spring rate 80 N\/mm (about 457 lb\/in); approximately 0-25 mm lowering adjustment range; use with original top mounts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear:\u003c\/strong\u003e Aluminum monotube shock absorber; spring rate 110 N\/mm (about 628 lb\/in); approximately 0-25 mm lowering adjustment range; use with original top mounts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService:\u003c\/strong\u003e rebuildable dampers, so they can be serviced and re-valved for custom tuning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion:\u003c\/strong\u003e salt spray tested to ISO 9227\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Öhlins states about 10 kg (22 lb) less than the standard suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproval:\u003c\/strong\u003e TÜV approved (Germany)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2-year Öhlins warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRide height at Öhlins' recommended setup:\u003c\/strong\u003e about 20 mm\/15 mm lower than stock; the final height is adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e one Öhlins part number, a complete coilover system for this application\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Mercedes-AMG, Mercedes-AMG A45 \/ CLA45 \/ GLA45\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eÖhlins part number:\u003c\/strong\u003e MES MV10S1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e 18-22 Mercedes-Benz A 45 AMG Road \u0026amp; Track Coilover Suspension Kit\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line. Cars with factory electronic dampers (for example PASM, PDCC, EDC, DCC or adaptive M suspension) may need an Öhlins cancellation kit or extra parts. Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Öhlins Road \u0026amp; Track and DFV\u003c\/h3\u003e\u003cp\u003eRoad \u0026amp; Track is Öhlins' range for drivers who want one suspension for the commute and the circuit. Its Dual Flow Valve (DFV) dampers are set with a single adjuster knob: turning it clockwise moves the damper toward its track setting, and that one adjustment changes low- and high-speed compression and rebound damping together. Back on the road, turn it back for a more relaxed ride.\u003c\/p\u003e\u003cp\u003eÖhlins is a Swedish suspension company with a long racing history in motorcycle and car motorsport. Öhlins USA is based in Hendersonville, North Carolina.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eThis is a special-order item from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53318272319786,"sku":"ohlMES MV10S1","price":3800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/8e706854dc917f29ce73be7ee9f802bbL.jpg?v=1793046740"}],"url":"https:\/\/team-anbd.com\/collections\/mercedes-amg-a45-cla45-gla45.oembed","provider":"Team ANBD","version":"1.0","type":"link"}