{"title":"Honda Civic Type R (FK8) Performance Parts","description":"\u003cp\u003eParts confirmed to fit the FK8 Honda Civic Type R.\u003c\/p\u003e\u003cp\u003eAero is the deepest part of this page — splitters, wings, vortex generators and underbody panels — with adjustable suspension, brake upgrades and cooling behind it.\u003c\/p\u003e\u003cp\u003eThe FK8 is quick out of the box and its weak points show up late in a session rather than on the first lap: front tyre temperature and brake heat. Aero that balances the car and hardware that holds alignment under load are where the useful gains sit. Installation and corner balancing available at our shop in Andover, NJ.\u003c\/p\u003e","products":[{"product_id":"front-splitter-kit-fk8-honda-civic-type-r","title":"Front Splitter Kit - FK8 Honda Civic Type R","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Verus Engineering Front Splitter significantly improves front-end downforce while following the OE bumper lines. The kit was designed to handle the loads it creates while keeping installation as straightforward as possible.\u003c\/p\u003e\n\u003cp\u003eThe splitter is made from durable, lightweight plastic and mounts to chassis hardpoints through two splitter ties and several bumper mounts, so the load goes into the structure rather than the bumper skin.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSplitter Blade\u003c\/li\u003e\n\u003cli\u003eSplitter Tie Assembly (2)\u003c\/li\u003e\n\u003cli\u003eSplitter Clevis (4)\u003c\/li\u003e\n\u003cli\u003eSplitter Extensions (4)\u003c\/li\u003e\n\u003cli\u003eSplitter Support Bracket\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all necessary components for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSignificantly increases front-end downforce\u003c\/li\u003e\n\u003cli\u003eFollows the OE bumper lines\u003c\/li\u003e\n\u003cli\u003eMounts to chassis hardpoints via splitter ties\u003c\/li\u003e\n\u003cli\u003eDurable, lightweight plastic construction\u003c\/li\u003e\n\u003cli\u003eStraightforward bolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD tested design\u003c\/li\u003e\n\u003cli\u003eHard, durable plastic composition\u003c\/li\u003e\n\u003cli\u003eStainless hardware used throughout\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0193A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits 2017–2021 Honda Civic Type R (FK8).\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556940968234,"sku":"A0193A","price":549.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0193A_5D_20Front_20Splitter_20Kit_20-_20Fk8_20Honda_20Civic_20Type_20R.jpg?v=1789012716"},{"product_id":"rear-diffuser-fk8-honda-civic-type-r","title":"Rear Diffuser - FK8 Honda Civic Type R","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Verus Engineering Rear Diffuser combines function, form and science on the FK8 Type R. It's produced from aluminum, keeping weight down and longevity up.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo things make it unusually adaptable:\u003c\/strong\u003e the entire centre section tilts to clear a variety of exhausts, and the whole diffuser translates vertically by an inch to fine-tune performance and ride height clearance.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D, and in-house scan data gives a near-OEM fit and finish.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear Diffuser Main Plane (3)\u003c\/li\u003e\n\u003cli\u003eRear Diffuser Front Bracket (2)\u003c\/li\u003e\n\u003cli\u003eRear Diffuser Rear Bracket (4)\u003c\/li\u003e\n\u003cli\u003eRear Diffuser Strake (2)\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all necessary components for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces drag and increases downforce\u003c\/li\u003e\n\u003cli\u003eTilting centre section clears a range of aftermarket exhausts\u003c\/li\u003e\n\u003cli\u003eVertically adjustable by one inch\u003c\/li\u003e\n\u003cli\u003eAluminum construction for low weight and durability\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD optimized design\u003c\/li\u003e\n\u003cli\u003e5052 aluminum sheet construction\u003c\/li\u003e\n\u003cli\u003eCNC laser cut and press brake bent\u003c\/li\u003e\n\u003cli\u003ePowder-coated black for durability\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0192A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits 2017–2021 Honda Civic Type R (FK8).\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556950634794,"sku":"A0192A","price":674.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0192A_5D_20Rear_20Diffuser_20-_20Fk8_20Honda_20Civic_20Type_20R_2010th_20Gen.jpg?v=1789012868"},{"product_id":"ucw-rear-wing-2017-2021-fk8-honda-civic-type-r","title":"UCW Rear Wing - 2017-2021 FK8 Honda Civic Type R","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe UCW Swan Neck Rear Wing significantly increases rear downforce on the FK8 Type R, boosting confidence on track and reducing lap times.\u003c\/p\u003e\n\u003cp\u003eThe airfoil was optimized within the available build volume — derived from the V1X — using state-of-the-art analysis software, with CFD confirming the wing receives adequate airflow once installed. The swan neck mounting feeds the wing clean airflow from above, keeping efficiency higher than a conventional bottom-mount design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoose aluminum or carbon fiber endplates.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUCW Wings are assembled per order and ship within 5 business days of receipt of order unless otherwise specified.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUCW Swan Neck Rear Wing Element Assembly\u003c\/li\u003e\n\u003cli\u003eRear Wing Upright, machined aluminum (2)\u003c\/li\u003e\n\u003cli\u003eRear Wing Trunk Mount, machined aluminum (2)\u003c\/li\u003e\n\u003cli\u003eRear Wing Endplate (2)\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all parts necessary for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized airfoil using the ANSYS Adjoint Solver\u003c\/li\u003e\n\u003cli\u003eImproved efficiency (L\/D) through swan neck mounting\u003c\/li\u003e\n\u003cli\u003eIncreased downforce\u003c\/li\u003e\n\u003cli\u003eCapable of balancing out significant front aerodynamic systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon fiber rear wing — 2x2 twill pre-preg carbon, autoclave cured, automotive high-gloss clear\u003c\/li\u003e\n\u003cli\u003eMachined billet aluminum uprights and trunk mounts\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart Numbers:\u003c\/strong\u003e A0582A (aluminum endplates) \/ A0582A-CRB (carbon fiber endplates)\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits 2017–2021 Honda Civic Type R (FK8).\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Aluminum","offer_id":52556951257386,"sku":"A0582A","price":2599.95,"currency_code":"USD","in_stock":true},{"title":"Carbon Fiber","offer_id":52556951290154,"sku":"A0582A-CRB","price":2719.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0582A-CRB_5D_20UCW_20Rear_20Wing_20for_202017-2021_20FK8_20Honda_20Civic_20Type_20R_20_28Yes_29.jpg?v=1789012884"},{"product_id":"side-splitters-2017-2021-fk8-honda-civic-type-r","title":"Side Splitters - 2017-2021 FK8 Honda Civic Type R","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eSide splitters complete the aerodynamic appearance of the FK8 Type R while doing real work. They reduce the amount of high-pressure air spilling from the top side of the car to the underbody, cutting lift — an effect most pronounced in yaw, while cornering.\u003c\/p\u003e\n\u003cp\u003eConstructed from hard, durable plastic that withstands small impacts without shattering.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSide Splitter (2)\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces lift by sealing the sides of the car\u003c\/li\u003e\n\u003cli\u003eMost effective in yaw, where it matters most\u003c\/li\u003e\n\u003cli\u003eHard, durable plastic body\u003c\/li\u003e\n\u003cli\u003eNon-invasive bolt-on install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD tested design\u003c\/li\u003e\n\u003cli\u003eHard, durable plastic composition\u003c\/li\u003e\n\u003cli\u003eStainless hardware used throughout\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0588A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits 2017–2021 Honda Civic Type R (FK8).\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556952928554,"sku":"A0588A","price":219.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0588A_5D_20Side_20Splitters_20for_202017-2021_20FK8_20Honda_20Civic_20Type_20R.jpg?v=1789012918"},{"product_id":"vortex-generator-kit-fk8-honda-civic-type-r","title":"Vortex Generator Kit - FK8 Honda Civic Type R","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe FK8 Type R is a capable track car from the factory, and better still with aero. While developing their rear wings, Verus found detached flow on the rear glass — that detachment increases drag and, given where the wings sit, reduces flow to the wing's underside and costs efficiency.\u003c\/p\u003e\n\u003cp\u003eThese vortex generators keep that flow attached, improving overall vehicle efficiency. They install with double-sided tape and a supplied template.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoose your material:\u003c\/strong\u003e 3D printed carbon nylon, or 2x2 twill carbon fiber.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVortex Generators — carbon fiber or 3D printed carbon nylon, depending on the option selected\u003c\/li\u003e\n\u003cli\u003e3M double-sided tape\u003c\/li\u003e\n\u003cli\u003eInstall template\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces drag by keeping flow attached over the rear glass\u003c\/li\u003e\n\u003cli\u003eImproves flow to the underside of a rear wing\u003c\/li\u003e\n\u003cli\u003eSimple tape-on installation\u003c\/li\u003e\n\u003cli\u003eOEM fit and function\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2x2 twill pre-preg carbon (carbon fiber option) or 3D printed carbon nylon\u003c\/li\u003e\n\u003cli\u003e3M double-sided tape supplied\u003c\/li\u003e\n\u003cli\u003eInstall template included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart Numbers:\u003c\/strong\u003e A0665A-3D (3D printed carbon nylon) \/ A0665A-CRB (carbon fiber)\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits 2017–2021 Honda Civic Type R (FK8).\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"3D Printed Carbon Nylon","offer_id":52556962595114,"sku":"A0665A-3D","price":219.95,"currency_code":"USD","in_stock":true},{"title":"Carbon Fiber","offer_id":52556962627882,"sku":"A0665A-CRB","price":352.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0665A-CRB_5D_20Vortex_20Generator_20Kit_20-_20FK8_20Honda_20CTR_20_28Carbon_20Fiber_29.jpg?v=1789013031"},{"product_id":"ap-racing-by-essex-radi-cal-front-brake-kit-cp9660-355mm-honda-civic-type-r","title":"AP Racing by Essex Radi-CAL Front Brake Kit (CP9660 \/ 355mm) - Honda Civic Type R","description":"\u003ch3\u003eAP Racing by Essex Radi-CAL Front Competition Brake Kit\u003c\/h3\u003e\n\u003cp\u003eFits Honda Civic Type R.\u003c\/p\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAP Racing CP9660 Radi-CAL six piston calipers\u003c\/li\u003e\n\u003cli\u003e355 x 32mm, 72 vane AP Racing disc\u003c\/li\u003e\n\u003cli\u003eSaves 5 unsprung lbs. from nose vs. OEM FK8 brakes\u003c\/li\u003e\n\u003cli\u003eEvery component designed to resist the heat of extended track sessions\u003c\/li\u003e\n\u003cli\u003ePistons sized properly to allow for seamless integration with OEM master cylinder and ABS system\u003c\/li\u003e\n\u003cli\u003eDesigned to work with OEM rear brakes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFinish\u003c\/h3\u003e\n\u003cp\u003eAvailable in standard finish or ENP (Electroless Nickel Plating).\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eEssex reference the OEM FK8 brakes in the specification for this kit. \u003cstrong\u003eContact us with your year, model, trim and wheel details before ordering\u003c\/strong\u003e — we will confirm the correct kit for your generation of Type R, along with any modification required and wheel clearance, in writing before your order is processed.\u003c\/p\u003e\n\u003cp\u003eProfessional installation is recommended for all competition brake kits.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFront kit. Brake pads and pad tension kits available separately — contact us for a quote alongside the kit.\u003c\/em\u003e\u003c\/p\u003e","brand":"AP Racing by Essex","offers":[{"title":"Standard","offer_id":52562120671530,"sku":"13.01.10087","price":5349.0,"currency_code":"USD","in_stock":true},{"title":"ENP","offer_id":52562120704298,"sku":"13.01.10087-ENP","price":5549.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/9660_355_enp_kit_8.png?v=1789058588"},{"product_id":"ferodo-stock-caliper-brake-pads-honda-civic-type-r-fk8","title":"Ferodo Stock Caliper Brake Pads - Honda Civic Type R (FK8)","description":"\u003ch3\u003eFerodo Stock Caliper Brake Pads\u003c\/h3\u003e\n\u003cp\u003eDirect replacement pads for the factory calipers on the Honda Civic Type R (FK8) — no big brake kit required. This front pad is shared with the Subaru WRX\/STI (GR\/GV), while the rear pad is FK8-specific.\u003c\/p\u003e\n\u003ch3\u003eChoosing a Compound\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDS3.12\u003c\/strong\u003e — high-bite endurance compound for sustained track use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDS2500\u003c\/strong\u003e — Ferodo's most popular fast-road and track day compound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDS3000\u003c\/strong\u003e — dedicated track compound, higher operating temperature range than DS2500\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDS1.11\u003c\/strong\u003e — endurance racing compound with strong resistance to fade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eContact us with your exact year and trim before ordering\u003c\/strong\u003e if you're unsure which position (front or rear) you need.\u003c\/p\u003e","brand":"Ferodo","offers":[{"title":"Front \/ DS2500","offer_id":52606627119402,"sku":"11 FRP3067H-N-FK8","price":457.37,"currency_code":"USD","in_stock":true},{"title":"Front \/ DS3000","offer_id":52606627152170,"sku":"11 FRP3067R-N-FK8","price":659.39,"currency_code":"USD","in_stock":true},{"title":"Front \/ DS1.11","offer_id":52606627184938,"sku":"11 FRP3067W-N-FK8","price":773.07,"currency_code":"USD","in_stock":true},{"title":"Front \/ DS3.12","offer_id":52606627217706,"sku":"11 FRP3067G-N-FK8","price":773.04,"currency_code":"USD","in_stock":true},{"title":"Rear \/ DS2500","offer_id":52606627250474,"sku":"11 FCP5086H-N","price":259.99,"currency_code":"USD","in_stock":true},{"title":"Rear \/ DS1.11","offer_id":52606627283242,"sku":"11 FCP5086W-N","price":406.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/ferodoracingpadssm_4194_2_c45fd462-5ef4-4ed0-b549-bff81ee5fc8b.jpg?v=1789440402"},{"product_id":"csg-spec-brake-pads-front-honda-civic-type-r-fk2-fk8-fl5","title":"CSG Spec Brake Pads (Front) - Honda Civic Type-R FK2\/FK8\/FL5","description":"\u003ch3\u003eCSG Spec Brake Pads (Front) — Honda Civic Type-R (FK2\/FK8\/FL5)\u003c\/h3\u003e\n\u003cp\u003eCounterSpace Garage develops CSG Spec friction materials from extensive motorsport testing across GT racing, time attack, HPDE, and one-make race series — built where \"off the shelf\" pads were often inadequate.\u003c\/p\u003e\n\u003ch3\u003eCompound Options\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eC12 (Sprint, Bedded):\u003c\/strong\u003e High-friction sprint compound, prebedded for immediate use, built for strong initial bite and consistent fade resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eC1XB (Sprint, Bedded):\u003c\/strong\u003e Progressive, medium-high friction. Strong bite, moderate wear. Works with a wide range of grip levels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCP (Performance, Bedded):\u003c\/strong\u003e Low dust and noise, fade resistant, versatile road-and-track solution. Progressive, high friction profile with long life. Avg friction 0.43–0.49 μ, ideal range 50–700°C.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Honda Civic Type-R FK2, FK8, FL5, 2015–2025, front axle.\u003c\/em\u003e\u003c\/p\u003e","brand":"CounterSpace Garage","offers":[{"title":"C12 Sprint (Bedded)","offer_id":52625770840362,"sku":"CSG.1001.16.C12B","price":590.0,"currency_code":"USD","in_stock":true},{"title":"C1XB Sprint","offer_id":52625770873130,"sku":"CSG.1001.16.C1XB","price":490.0,"currency_code":"USD","in_stock":true},{"title":"CP Performance (Bedded)","offer_id":52625770905898,"sku":"CSG.1001.16.CPB","price":390.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/1382.18.c2_02_watermarked_fda99374-bacc-466d-a20f-79aec3dc6398.jpg?v=1789603571"},{"product_id":"csg-spec-brake-pads-rear-honda-civic-type-r-fk8-fl5","title":"CSG Spec Brake Pads (Rear) - Honda Civic Type-R FK8\/FL5","description":"\u003ch3\u003eCSG Spec Brake Pads (Rear) — Honda Civic Type-R (FK2\/FK8\/FL5)\u003c\/h3\u003e\n\u003cp\u003eCounterSpace Garage develops CSG Spec friction materials from extensive motorsport testing across GT racing, time attack, HPDE, and one-make race series — built where \"off the shelf\" pads were often inadequate.\u003c\/p\u003e\n\u003ch3\u003eCompound Options\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eC1X (Sprint):\u003c\/strong\u003e Progressive, medium-high friction. Strong bite, moderate wear. Works with a wide range of grip levels. Avg friction 0.38–0.41 μ, ideal range 150–750°C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCP (Performance):\u003c\/strong\u003e Low dust and noise, fade resistant, versatile road-and-track solution. Progressive, high friction profile with long life. Avg friction 0.43–0.49 μ, ideal range 50–700°C.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Honda Civic Type-R FK2, FK8, FL5, 2017+, rear axle.\u003c\/em\u003e\u003c\/p\u003e","brand":"CounterSpace Garage","offers":[{"title":"C1X Sprint","offer_id":52625771036970,"sku":"CSG.940.14.C1X","price":400.0,"currency_code":"USD","in_stock":true},{"title":"CP Performance","offer_id":52625771069738,"sku":"CSG.940.14.CP","price":390.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/1382.18.c2_02_watermarked_72daf8d0-83a1-48c6-a77c-f71aa946a920.jpg?v=1789603587"},{"product_id":"jackson-racing-fan-shroud-kit-honda-civic-type-r-fk8","title":"Jackson Racing Fan Shroud Kit - Honda Civic Type R (FK8)","description":"\u003ch3\u003eJackson Racing Fan Shroud Kit — Honda Civic Type R (FK8, 2017–2021)\u003c\/h3\u003e\n\u003cp\u003eOver 30% increase in CFM vs. OEM, for increased cooling efficiency.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision-fit aluminum fan shroud with unique \"binding\" edge and silicone rubber strips for a proper seal\u003c\/li\u003e\n\u003cli\u003eTIG-welded and CNC-machined mounting pins, integrated blow-through flap doors\u003c\/li\u003e\n\u003cli\u003eFits all OEM, JR, and aftermarket radiators — built in the USA\u003c\/li\u003e\n\u003cli\u003e12\" SPAL Heavy Duty High Output fan — the highest-output 12\" fan available, includes an OEM Honda-to-SPAL connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eFits Honda Civic Type R FK8, 2017–2021.\u003c\/em\u003e\u003c\/p\u003e","brand":"Jackson Racing","offers":[{"title":"Default Title","offer_id":52625870717226,"sku":"5200-10-J01","price":529.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/FK8_Fanshroud-800x800.png?v=1789606735"},{"product_id":"jackson-racing-radiator-ducting-kit-honda-civic-type-r-fk8","title":"Jackson Racing Radiator Ducting Kit - Honda Civic Type R (FK8)","description":"\u003ch3\u003eJackson Racing Radiator Ducting Kit — Honda Civic Type R (FK8, 2017–2021)\u003c\/h3\u003e\n\u003cp\u003eDirects incoming air over the cooling cores instead of letting it spill over and under the radiator, increasing cooling efficiency with an integrated air guide to the intake.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision-fit aluminum fan ducting, black anodized and laser-etched\u003c\/li\u003e\n\u003cli\u003eFits all OEM, JR, and aftermarket radiators — designed to fit both 17–19 and 20–21 bumper\/grille\u003c\/li\u003e\n\u003cli\u003eLower duct fits OEM intercooler only\u003c\/li\u003e\n\u003cli\u003eBuilt in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eAvailable individually (Upper Duct) or as a complete Upper and Lower kit. Fits Honda Civic Type R FK8, 2017–2021.\u003c\/em\u003e\u003c\/p\u003e","brand":"Jackson Racing","offers":[{"title":"Upper Radiator Duct (Individual)","offer_id":52625873830186,"sku":"5121-10-J01","price":199.0,"currency_code":"USD","in_stock":true},{"title":"Radiator Ducting Kit (Upper and Lower)","offer_id":52625873862954,"sku":"5120-10-J01","price":349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/Duct2-800x800_1836a1f6-1645-4141-b1b2-7dbccda80eaa.png?v=1789606979"},{"product_id":"jackson-racing-aluminum-radiator-honda-civic-type-r-fk8","title":"Jackson Racing Aluminum Radiator - Honda Civic Type R (FK8)","description":"\u003ch3\u003eJackson Racing Aluminum Radiator — Honda Civic Type R (FK8, 2017–2021)\u003c\/h3\u003e\n\u003cp\u003eA direct OEM replacement radiator with a 55% larger core than OEM (42mm vs. 27mm) for increased cooling capacity, built around a 42mm CSF Racing Radiator Core with CSF-exclusive B-Tube technology and multi-louvered fin design.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll-original Jackson Racing design — unique forward mounting provides maximum rear clearance for large fans and airflow\u003c\/li\u003e\n\u003cli\u003eFits with the OEM A\/C condenser and the JR Fan Shroud Kit\u003c\/li\u003e\n\u003cli\u003eSatin finish; high-pressure 1.4 bar radiator cap included\u003c\/li\u003e\n\u003cli\u003eDeveloped in partnership with CSF for maximum cooling and premium fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eFits Honda Civic Type R FK8, 2017–2021 (OEM PN 19010-5BF-A01 for 2017–2019, 19010-5BF-A11 for 2020–2021).\u003c\/em\u003e\u003c\/p\u003e","brand":"Jackson Racing","offers":[{"title":"Default Title","offer_id":52625874551082,"sku":"5100-10-J01","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/Rad1web-800x800.png?v=1789607082"},{"product_id":"whiteline-front-sway-bar-link-assembly-honda-civic-type-r-fk8","title":"Whiteline Front Sway Bar Link Assembly (330-355mm) - Honda Civic Type R (FK8)","description":"\u003ch3\u003eWhiteline Adjustable Sway Bar Link Assembly — 330–355mm\u003c\/h3\u003e\n\u003cp\u003eHeavy-duty, adjustable end links replace the factory sway bar links, eliminating the flex and play that develops in worn factory links — and letting you remove sway bar preload after lowering.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEliminates sway bar preload on installation\u003c\/li\u003e\n\u003cli\u003e330–355mm adjustable length, 10mm ball stud\u003c\/li\u003e\n\u003cli\u003eHeavy-duty steel ball joints that rotate to any angle\u003c\/li\u003e\n\u003cli\u003eAnodized alloy body for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eLimited lifetime warranty.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThis is a universal-fit link sized for the front of the Honda Civic Type R (FK8, 2017+) and Honda Civic (FC\/FK, 2016+). Measure your required centre-to-centre length before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":52644391977258,"sku":"whlKLC140-335","price":181.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/contents_2e6b1fed-aaee-4c09-8cfe-94ad987f26e9.jpg?v=1789667082"},{"product_id":"whiteline-rear-sway-bar-end-link-honda-civic-type-r-fk8","title":"Whiteline Rear Sway Bar End Link - Honda Civic Type R (FK8\/FL5)","description":"\u003ch3\u003eWhiteline Rear Adjustable Sway Bar End Link — Honda Civic 10th\/11th Gen\u003c\/h3\u003e\n\u003cp\u003eHeavy-duty, adjustable end links replace the factory sway bar links, eliminating the flex and play that develops in worn factory links — and letting you remove sway bar preload after lowering.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEliminates sway bar preload on installation\u003c\/li\u003e\n\u003cli\u003eAdjustable length for correct geometry on lowered cars\u003c\/li\u003e\n\u003cli\u003eHeavy-duty steel ball joints that rotate to any angle\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eLimited lifetime warranty.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Honda Civic 10th gen (FC\/FK, includes Type R FK8) and 11th gen (FE\/FL, includes Type R FL5) — confirm your exact year\/chassis before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":52644392796458,"sku":"whlKLC217","price":181.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/contents_6a2f72ce-ff9b-445d-b0f0-3df58f77438d.jpg?v=1789667794"},{"product_id":"whiteline-rear-upper-camber-arm-adjustable-pair-honda-civic-2015","title":"Whiteline Adjustable Rear Upper Camber Arms - Honda Civic Type R (FK8\/FL5) \/ Acura Integra","description":"\u003ch3\u003eWhiteline Adjustable Rear Upper Camber Arms — Honda Civic 10th\/11th Gen \u0026amp; Acura Integra\u003c\/h3\u003e\n\u003cp\u003eHeavy-duty control arms with a turnbuckle design providing on-car camber adjustment. Pre-installed with low-compliance synthetic elastomer bushings.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOn-car camber adjustment via turnbuckle — no disassembly needed to dial in alignment\u003c\/li\u003e\n\u003cli\u003eImproved traction and cornering grip\u003c\/li\u003e\n\u003cli\u003eBetter tire life on lowered and track-focused builds\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eLimited lifetime warranty.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Honda Civic 10th gen (FC\/FK, includes Type R FK8 and Si) and 11th gen (FE\/FL, includes Type R FL5), plus Acura Integra (2023+) — confirm your exact year\/chassis before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":52644393287978,"sku":"whlKTA259","price":294.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/contents_78454b92-e290-4fd6-825b-90b30126f9d2.jpg?v=1789667835"},{"product_id":"whiteline-front-camber-adjuster-kit-lower-ball-joint-honda-civic-x","title":"Whiteline Front Camber Adjuster Kit (Lower Ball Joint) - Honda Civic Type R (FK8\/FL5)","description":"\u003ch3\u003eWhiteline Front Lower Ball Joint Camber Adjuster Kit — Honda Civic 10th\/11th Gen\u003c\/h3\u003e\n\u003cp\u003eReplaces the factory lower ball joint with an adjustable unit, giving you roughly 1° of extra front camber adjustment beyond factory limits — useful for dialing in an aggressive track alignment after lowering.\u003c\/p\u003e\n\u003ch3\u003eKit Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 Ball Joints\u003c\/li\u003e\n\u003cli\u003e6 Bolts, 6 Nuts, 2 Split Pins\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFine-tune camber for optimum tire contact and longer tire life\u003c\/li\u003e\n\u003cli\u003eProtective E-Coat finish for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eCompensates for body roll and tire roll when cornering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eLimited lifetime warranty. Wheel alignment required after installation — approx. 2.5 hour install.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Honda Civic 10th gen (FC\/FK, includes Type R FK8 and Si) and 11th gen (FE\/FL, includes Type R FL5) — confirm your exact year\/chassis before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":52644394631466,"sku":"whlKCA468","price":165.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/contents_72963151-c9da-497a-92a1-226fd148f556.jpg?v=1789667877"},{"product_id":"whiteline-rear-sway-bar-22mm-hd-adjustable-honda-civic-type-r-fk8","title":"Whiteline Rear Sway Bar 22mm (2-Position Adjustable) - Honda Civic Type R (FK8\/FL5)","description":"\u003ch3\u003eWhiteline Rear Sway Bar 22mm (2-Position Adjustable) — Honda Civic 10th\/11th Gen\u003c\/h3\u003e\n\u003cp\u003eA 22mm solid spring-steel rear bar with two adjustment positions, letting you tune rear roll stiffness to dial out understeer on a front-drive chassis.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces body roll for flatter, more confident cornering\u003c\/li\u003e\n\u003cli\u003e2-position adjustment to tune handling balance\u003c\/li\u003e\n\u003cli\u003eIncludes polyurethane mount bushings with internal grease reservoirs\u003c\/li\u003e\n\u003cli\u003eSolid steel construction with protective powder coat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eLimited lifetime warranty. Pairs well with adjustable end links (KLC217) on lowered cars to run the bar at zero preload.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Honda Civic 10th gen (FC\/FK, includes Type R FK8) and 11th gen (FE\/FL, includes Type R FL5) — confirm your exact year\/chassis before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":52644395614506,"sku":"whlBHR97Z","price":204.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/contents_0c932aef-a877-4113-8596-e199c2c0bd4f.jpg?v=1789667955"},{"product_id":"whiteline-front-camber-adjuster-kit-honda-civic-type-r-fk8","title":"Whiteline Front Camber Adjustable Lower Ball Joint Set - Honda Civic Type R (FK8\/FL5) \/ Integra Type S","description":"\u003ch3\u003eWhiteline Camber Adjustable Front Lower Ball Joint Set — Honda Civic Type R FK8\/FL5\u003c\/h3\u003e\n\u003cp\u003eA must for lowered cars. Fine-tune camber with up to \u003cstrong\u003e-3° of negative camber gain in 1° increments\u003c\/strong\u003e, letting you dial in an aggressive alignment for track days without swapping to coilovers.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUp to -3° negative camber, adjustable in 1° steps\u003c\/li\u003e\n\u003cli\u003eSubstantial increase in front roll resistance\u003c\/li\u003e\n\u003cli\u003eLess suspension compression on the outside front tire during cornering\u003c\/li\u003e\n\u003cli\u003eMore even weight distribution, better tire contact and tire life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eLimited lifetime warranty. Wheel alignment required after installation.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Honda Civic Type R FK8 (2017–2021) and FL5 (2023+), plus Acura Integra Type S (2024+).\u003c\/em\u003e\u003c\/p\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":52644398137642,"sku":"whlKCA510","price":323.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/contents_97431fb3-15f1-4e8f-b518-b242f79cd8a5.jpg?v=1789668015"},{"product_id":"whiteline-transmission-mount-insert-honda-civic-1996-2019","title":"Whiteline Front Lower Engine Mount Insert Bushing - Honda Civic Type R (FK8)","description":"\u003ch3\u003eWhiteline Front Lower Engine Mount Insert Bushing — Honda Civic 10th Gen (FC\/FK\/FK8)\u003c\/h3\u003e\n\u003cp\u003eInstalls directly into the factory lower engine (torque) mount, filling the large voids in the OEM rubber bushing. Reduces excessive engine and transmission movement under load for sharper throttle response and cleaner gear engagement.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSharper throttle response and improved shift feel\u003c\/li\u003e\n\u003cli\u003eReduces engine\/drivetrain movement under load\u003c\/li\u003e\n\u003cli\u003eSynthetic elastomer construction balances performance against daily-driver NVH\u003c\/li\u003e\n\u003cli\u003eInsert design — no need to replace the whole mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eLimited lifetime warranty.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Honda Civic 10th gen (FC\/FK), including Civic Si and Type R FK8 (2017–2021).\u003c\/em\u003e\u003c\/p\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":52644398760234,"sku":"whlKDT967","price":31.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/contents_86e86c52-0ece-40be-a90f-80c6eb74e998.jpg?v=1789668078"},{"product_id":"evs-tuning-spec-e-aero-package-honda-civic-type-r-fk8","title":"EVS Tuning Spec E Aero Package - Honda Civic Type R (FK8)","description":"\u003ch3\u003eEVS Tuning Spec E Aero Package — Honda Civic Type R (FK8)\u003c\/h3\u003e\u003cp\u003eEVS Tuning's complete Spec E aero programme for the FK8 Civic Type R, developed through their own time attack campaign. The most comprehensive package offered for the chassis.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCoordinated front, side and rear aero developed as a system\u003c\/li\u003e\n\u003cli\u003eTrack-proven on EVS Tuning's own competition cars\u003c\/li\u003e\n\u003cli\u003ePriced well below sourcing the components individually\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFits Honda Civic Type R FK8, 2017 to 2021.\u003c\/em\u003e\u003c\/p\u003e","brand":"EVS Tuning","offers":[{"title":"Default Title","offer_id":52663979540778,"sku":"EVS-FK8-SPECE","price":3725.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/b1.jpg?v=1789740832"},{"product_id":"evs-tuning-carbon-front-lip-spoiler-v2-honda-civic-type-r-fk8","title":"EVS Tuning Carbon Front Lip Spoiler V2 - Honda Civic Type R (FK8)","description":"\u003ch3\u003eEVS Tuning Carbon Front Lip Spoiler V2 — Honda Civic Type R (FK8)\u003c\/h3\u003e\u003cp\u003eSecond-generation carbon front lip spoiler for the FK8, revised from EVS Tuning's original design based on track development.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGenuine carbon fiber with UV-stable clear coat\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on to the OEM front bumper\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFits Honda Civic Type R FK8, 2017 to 2021.\u003c\/em\u003e\u003c\/p\u003e","brand":"EVS Tuning","offers":[{"title":"Default Title","offer_id":52663979573546,"sku":"EVS-FK8-FL","price":1265.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/b2.jpg?v=1789740832"},{"product_id":"evs-tuning-carbon-rear-spoiler-honda-civic-type-r-fk8","title":"EVS Tuning Carbon Rear Spoiler - Honda Civic Type R (FK8)","description":"\u003ch3\u003eEVS Tuning Carbon Rear Spoiler — Honda Civic Type R (FK8)\u003c\/h3\u003e\u003cp\u003eCarbon rear spoiler for the FK8, adding rear downforce while replacing the factory wing with a cleaner profile.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGenuine carbon fiber with UV-stable clear coat\u003c\/li\u003e\n\u003cli\u003eBolt-on fitment using existing mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFits Honda Civic Type R FK8, 2017 to 2021.\u003c\/em\u003e\u003c\/p\u003e","brand":"EVS Tuning","offers":[{"title":"Default Title","offer_id":52663981441322,"sku":"EVS-FK8-RW","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/b3.jpg?v=1789740833"},{"product_id":"evs-tuning-carbon-side-splitter-honda-civic-type-r-fk8","title":"EVS Tuning Carbon Side Splitter - Honda Civic Type R (FK8)","description":"\u003ch3\u003eEVS Tuning Carbon Side Splitter — Honda Civic Type R (FK8)\u003c\/h3\u003e\u003cp\u003eSide splitters that extend below the FK8's rocker panels, helping seal airflow along the car's flanks and reduce pressure under the floor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGenuine carbon fiber with UV-stable clear coat\u003c\/li\u003e\n\u003cli\u003eBolt-on fitment, sold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFits Honda Civic Type R FK8, 2017 to 2021.\u003c\/em\u003e\u003c\/p\u003e","brand":"EVS Tuning","offers":[{"title":"Default Title","offer_id":52663981506858,"sku":"EVS-FK8-SS","price":935.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/b4.jpg?v=1789740833"},{"product_id":"evs-tuning-carbon-front-lip-splitter-v2-honda-civic-type-r-fk8","title":"EVS Tuning Carbon Front Lip Splitter V2 - Honda Civic Type R (FK8)","description":"\u003ch3\u003eEVS Tuning Carbon Front Lip Splitter V2 — Honda Civic Type R (FK8)\u003c\/h3\u003e\u003cp\u003eRevised carbon splitter that mounts to the leading edge of the FK8's front lip, extending the aero surface forward for additional front downforce.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGenuine carbon fiber with UV-stable clear coat\u003c\/li\u003e\n\u003cli\u003eDesigned to pair with the EVS front lip spoiler\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFits Honda Civic Type R FK8, 2017 to 2021.\u003c\/em\u003e\u003c\/p\u003e","brand":"EVS Tuning","offers":[{"title":"Default Title","offer_id":52663981539626,"sku":"EVS-FK8-FLS","price":660.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/b2_0890b21b-ce6a-4918-abc4-c31ac86734c0.jpg?v=1789747842"},{"product_id":"evs-tuning-carbon-rear-gurney-flap-oe-fit-honda-civic-type-r-fk8","title":"EVS Tuning Carbon Rear Gurney Flap (OE Fit) - Honda Civic Type R (FK8)","description":"\u003ch3\u003eEVS Tuning Carbon Rear Gurney Flap (OE Fit) — Honda Civic Type R (FK8)\u003c\/h3\u003e\u003cp\u003eA gurney flap fitted to the trailing edge of the factory rear wing. Small in size but effective — it increases the wing's pressure differential and adds rear downforce for very little drag penalty.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGenuine carbon fiber with UV-stable clear coat\u003c\/li\u003e\n\u003cli\u003eDesigned for the OEM FK8 wing, no modification needed\u003c\/li\u003e\n\u003cli\u003eOne of the most cost-effective aero upgrades available for the chassis\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFits Honda Civic Type R FK8 with the factory rear wing.\u003c\/em\u003e\u003c\/p\u003e","brand":"EVS Tuning","offers":[{"title":"Default Title","offer_id":52663981605162,"sku":"EVS-FK8-GF","price":133.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/b5.jpg?v=1789740833"},{"product_id":"evs-tuning-license-plate-relocator-honda-civic-type-r-fk8-2017-2019","title":"EVS Tuning License Plate Relocator - Honda Civic Type R (FK8, 2017-2019)","description":"\u003ch3\u003eEVS Tuning License Plate Relocator — Honda Civic Type R (FK8, 2017-2019)\u003c\/h3\u003e\u003cp\u003eRelocates the front plate clear of the FK8's central intake, restoring airflow to the radiator and intercooler.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific to the 2017-2019 front bumper\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFits Honda Civic Type R FK8, 2017 to 2019. For 2020-2021 cars, order the FK8 20-21 version.\u003c\/em\u003e\u003c\/p\u003e","brand":"EVS Tuning","offers":[{"title":"Default Title","offer_id":52663981703466,"sku":"EVS-FK8-LIC","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/b6.jpg?v=1789740833"},{"product_id":"evs-tuning-license-plate-relocator-honda-civic-type-r-fk8-2020-2021","title":"EVS Tuning License Plate Relocator - Honda Civic Type R (FK8, 2020-2021)","description":"\u003ch3\u003eEVS Tuning License Plate Relocator — Honda Civic Type R (FK8, 2020-2021)\u003c\/h3\u003e\u003cp\u003eRelocates the front plate clear of the central intake on the facelifted FK8 bumper, restoring cooling airflow.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific to the 2020-2021 facelift bumper\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFits Honda Civic Type R FK8, 2020 to 2021. For 2017-2019 cars, order the FK8 17-19 version.\u003c\/em\u003e\u003c\/p\u003e","brand":"EVS Tuning","offers":[{"title":"Default Title","offer_id":52663981834538,"sku":"EVS-FK820-LIC","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/d1.jpg?v=1789741082"},{"product_id":"verus-engineering-pinch-weld-jack-pucks-honda-civic-type-r-fk8","title":"Verus Engineering Pinch Weld Jack Pucks - Honda Civic Type R (FK8)","description":"\u003ch3\u003eVerus Engineering Pinch Weld Jack Pucks — Honda Civic Type R (FK8)\u003c\/h3\u003e\u003cp\u003eMachined pucks that locate on the pinch weld and spread the load when you jack or lift the car. They stop the seam crushing and folding — cheap insurance on a car that sees regular track use and frequent lifts.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMachined billet aluminium, anodised\u003c\/li\u003e\n\u003cli\u003eLocates positively on the pinch weld\u003c\/li\u003e\n\u003cli\u003eChoice of three colours\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFits Honda Civic Type R FK8 (2017-2021).\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Black","offer_id":52664396448042,"sku":"A0769A-BLK","price":149.95,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":52664396480810,"sku":"A0769A-BLU","price":149.95,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":52664396513578,"sku":"A0769A-RED","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/image_1024_97b40fe4-8e82-4e23-b0ab-f9a8e709b46d.jpg?v=1789744742"},{"product_id":"girodisc-2015-honda-civic-type-r-fk8-slotted-rear-rotors","title":"GiroDisc 2015+ Honda Civic Type R FK8 Slotted Rear Rotors","description":"\u003cp\u003eGiroDisc two-piece slotted rear rotors for the 2015+ Honda Civic Type R FK8. These replace the factory one-piece rear rotors with a lighter, rebuildable floating assembly built for repeated track use.\u003c\/p\u003e\u003ch3\u003eWhy a GiroDisc two-piece rotor\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloating two-piece design.\u003c\/strong\u003e A cast iron disc ring is mounted to a central hat with high-strength alloy steel drive pins, so the ring can expand axially and radially with heat instead of fighting the hat. Anti-noise spring washers keep the float silent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6061-T6 aluminum hat.\u003c\/strong\u003e The hat is machined from U.S.-sourced 6061-T6 aircraft-specification aluminum, cutting rotating and unsprung weight against the one-piece factory casting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved internal vanes\u003c\/strong\u003e act as a centrifugal pump, forcing cooling air through the disc on track.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted, not cross-drilled.\u003c\/strong\u003e Slots sweep the pad face clean without the stress risers that make drilled rotors crack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRebuildable.\u003c\/strong\u003e When the iron is worn out you replace the rings only and keep the hats and hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Honda Civic Type R (FK8)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e A2-166\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePriced and sold as a pair — one complete rear axle set.\u003c\/li\u003e\n\u003cli\u003eTwo-piece rotor assemblies with aluminum hats, iron rings and all mounting hardware, assembled and ready to bolt on.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can bed the system in and \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787508642090,"sku":"girA2-166","price":850.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/408mm72v__74831.1677861688.jpg?v=1790619841"},{"product_id":"girodisc-2015-honda-civic-type-r-fk8-slotted-front-rings","title":"GiroDisc 2015+ Honda Civic Type R FK8 Slotted Front Rings","description":"\u003cp\u003eGiroDisc replacement cast iron rotor rings for the 2015+ Honda Civic Type R FK8, front axle. When the iron is worn or heat-checked, you replace the rings and keep the hats — the reason a two-piece rotor is cheaper to own over time.\u003c\/p\u003e\u003ch3\u003eAbout replacement rings\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRings only — \u003cstrong\u003ealuminum hats are not included\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eNew installation hardware (cap screws, hardened washers and anti-noise spring washers) is supplied. GiroDisc does not recommend reusing old hardware.\u003c\/li\u003e\n\u003cli\u003eSlotted friction surface with curved internal cooling vanes, same specification as the original assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThese rings are machined for GiroDisc hats and will not mount to factory center hats.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Honda Civic Type R (FK8)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e D1-047\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePriced and sold as a pair — one axle set of rings, plus new mounting hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can bed the system in and \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787512574250,"sku":"girD1-047","price":680.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/rings__37417.1689725167.jpg?v=1790620196"},{"product_id":"girodisc-2015-honda-civic-type-r-fk8-slotted-front-rotors","title":"GiroDisc 2015+ Honda Civic Type R FK8 Slotted Front Rotors","description":"\u003cp\u003eGiroDisc two-piece slotted front rotors for the 2015+ Honda Civic Type R FK8. These replace the factory one-piece front rotors with a lighter, rebuildable floating assembly built for repeated track use.\u003c\/p\u003e\u003ch3\u003eWhy a GiroDisc two-piece rotor\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloating two-piece design.\u003c\/strong\u003e A cast iron disc ring is mounted to a central hat with high-strength alloy steel drive pins, so the ring can expand axially and radially with heat instead of fighting the hat. Anti-noise spring washers keep the float silent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6061-T6 aluminum hat.\u003c\/strong\u003e The hat is machined from U.S.-sourced 6061-T6 aircraft-specification aluminum, cutting rotating and unsprung weight against the one-piece factory casting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved internal vanes\u003c\/strong\u003e act as a centrifugal pump, forcing cooling air through the disc on track.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted, not cross-drilled.\u003c\/strong\u003e Slots sweep the pad face clean without the stress risers that make drilled rotors crack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRebuildable.\u003c\/strong\u003e When the iron is worn out you replace the rings only and keep the hats and hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Honda Civic Type R (FK8)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e A1-166\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePriced and sold as a pair — one complete front axle set.\u003c\/li\u003e\n\u003cli\u003eTwo-piece rotor assemblies with aluminum hats, iron rings and all mounting hardware, assembled and ready to bolt on.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can bed the system in and \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787513819434,"sku":"girA1-166","price":850.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/408mm72v__80852.1677861529.jpg?v=1790619401"},{"product_id":"girodisc-2015-honda-civic-type-r-fk8-front-caliper-rebuild-kit","title":"GiroDisc 2015+ Honda Civic Type R FK8 Front Caliper Rebuild Kit","description":"\u003cp\u003eGiroDisc caliper rebuild kit for the 2015+ Honda Civic Type R FK8, front caliper. Everything needed to reseal one caliper — piston seals and dust boots — so a leaking or dragging caliper can be serviced instead of replaced.\u003c\/p\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEach kit covers one caliper.\u003c\/strong\u003e Order two for a complete axle.\u003c\/li\u003e\n\u003cli\u003eContains piston seals and dust boots matched to this caliper's piston sizes.\u003c\/li\u003e\n\u003cli\u003eBrake fluid must be flushed and the system bled after a rebuild.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Honda Civic Type R (FK8)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e CCRK1-166\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can bed the system in and \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787539018026,"sku":"girCCRK1-166","price":56.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/CCRK-C4__69534.1638317627.jpg?v=1790620271"},{"product_id":"girodisc-2015-honda-civic-type-r-fk8-front-dust-boot","title":"GiroDisc 2015+ Honda Civic Type R FK8 Front Dust Boot","description":"\u003cp\u003eGiroDisc caliper dust boots for the 2015+ Honda Civic Type R FK8, front caliper. Replacement piston dust boots keep dirt, water and brake dust out of the piston bores — the usual cause of sticking pistons and uneven pad wear.\u003c\/p\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEach set covers one caliper.\u003c\/strong\u003e Order two for a complete axle.\u003c\/li\u003e\n\u003cli\u003eBoots only. If the caliper is also weeping fluid, use the matching caliper rebuild kit, which includes piston seals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Honda Civic Type R (FK8)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e CDB1-166\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can bed the system in and \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787549536554,"sku":"girCDB1-166","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/CDB-4__60422.1638318340.jpg?v=1790620367"},{"product_id":"girodisc-2015-honda-civic-type-r-fk8-slotted-rear-rings","title":"GiroDisc 2015+ Honda Civic Type R FK8 Slotted Rear Rings","description":"\u003cp\u003eGiroDisc replacement cast iron rotor rings for the 2015+ Honda Civic Type R FK8, rear axle. When the iron is worn or heat-checked, you replace the rings and keep the hats — the reason a two-piece rotor is cheaper to own over time.\u003c\/p\u003e\u003ch3\u003eAbout replacement rings\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRings only — \u003cstrong\u003ealuminum hats are not included\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eNew installation hardware (cap screws, hardened washers and anti-noise spring washers) is supplied. GiroDisc does not recommend reusing old hardware.\u003c\/li\u003e\n\u003cli\u003eSlotted friction surface with curved internal cooling vanes, same specification as the original assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThese rings are machined for GiroDisc hats and will not mount to factory center hats.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Honda Civic Type R (FK8)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e D2-166\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePriced and sold as a pair — one axle set of rings, plus new mounting hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can bed the system in and \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787558646058,"sku":"girD2-166","price":630.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/rings__52002.1689725234.jpg?v=1790620077"}],"url":"https:\/\/team-anbd.com\/collections\/honda-civic-type-r-fk8.oembed","provider":"Team ANBD","version":"1.0","type":"link"}