{"title":"Front Splitters","description":"\u003cp\u003eFront splitters build downforce at the nose by separating the high-pressure air stacking up against the bumper from the low-pressure air passing underneath.\u003c\/p\u003e\u003cp\u003eStreet and race-spec splitters, two-piece designs, splitter support kits and air dams, plus lip hardware and a diffuser tunnel kit. A splitter shifts balance forward, so on a car being set up properly it pairs with a rear wing or diffuser.\u003c\/p\u003e\u003cp\u003eFitment is chassis-specific. Send us the year, make and model, or see the full range in \u003ca href=\"\/collections\/aerodynamics\"\u003eAerodynamics\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"front-splitter-kit-bmw-e92-m3","title":"Front Splitter Kit - BMW E92 M3","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe BMW E92 M3 is a modern classic — sharp handling paired with a sublime naturally aspirated V8, and a favorite among track-day enthusiasts. Verus Engineering set out to build a cohesive aerodynamics suite for the E92 centered on balance and driver confidence, and this Front Splitter Kit is its foundation.\u003c\/p\u003e\n\u003cp\u003eFront splitters produce front-end downforce with minimal drag increase by creating a large pressure delta between the upper and lower surfaces. Using scan data taken directly from the car, this splitter was developed to pair with the UCW Rear Wing Kit and comfortably handles the downforce that pairing generates. It mounts at multiple chassis locations for a strong, durable install, and all hardware locations are recessed for improved aerodynamic performance and a factory-like finish.\u003c\/p\u003e\n\u003cp\u003eThe blade is produced from carbon polyweave, the same material used in top-tier motorsport. It isn't brittle, so it avoids the cracking common to carbon fiber and ABS, and it won't grab and bend under the car the way aluminum units can. It's also light and stiff — an ideal splitter material.\u003c\/p\u003e\n\u003cp\u003eThe air dam brings the splitter flat with the vehicle's underbody to improve performance further. It's made from sheet aluminum and powder-coated black for durability.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Carbon Polyweave Splitter Blade\u003c\/li\u003e\n\u003cli\u003e(2) Carbon Fiber Splitter Diffuser\u003c\/li\u003e\n\u003cli\u003e(1) Sheet Aluminum Air Dam (2 pieces)\u003c\/li\u003e\n\u003cli\u003e(1) Chassis Mount Bracket Kit (steel tubing)\u003c\/li\u003e\n\u003cli\u003e(1) Hardware Kit including all necessary hardware for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGreatly increases front-end downforce, providing balance for large rear wings\u003c\/li\u003e\n\u003cli\u003eCapable of handling 300+ lbs\u003c\/li\u003e\n\u003cli\u003eCarbon polyweave construction — strength, low weight, durability, and great appearance\u003c\/li\u003e\n\u003cli\u003eChassis-mounted splitter support throughout\u003c\/li\u003e\n\u003cli\u003eIntegrated aluminum air dam contoured to the front bumper lines for an OEM+ appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon polyweave front splitter: carbon thermoplastic composition, a durable material used in Indy Car, NASCAR, and F1\u003c\/li\u003e\n\u003cli\u003eSplitter air dam: 5052 sheet aluminum, powder-coated for durability\u003c\/li\u003e\n\u003cli\u003eSupport tube and brackets: steel mounting system that holds the splitter securely even at high speed\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout, with all necessary templates for a seamless installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eProperly designed front splitters greatly increase front-end grip. Using state-of-the-art software, Verus extracted additional performance from the splitter and air dam combination through an iterative design process, and sized the splitter to counteract the rear wing and diffuser for a safe, effective aero balance — important, since an unbalanced car is harder to drive at the limit.\u003c\/p\u003e\n\u003cp\u003eThis kit is part of the Ventus Aerodynamic Kit, a system designed to work in concert to add significant downforce, reduce lap times, and increase corner speed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0540A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556004688170,"sku":"A0540A","price":2599.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0540A_5D_20Front_20Splitter_20Kit_20-_20BMW_20E92_20M3.jpg?v=1789000558"},{"product_id":"front-splitter-toyota-gr86","title":"Front Splitter - Toyota GR86","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Verus Engineering Front Splitter increases front-end downforce and reduces drag in a simple bolt-on package. It's made from a hard, durable, stiff plastic that won't bend under the car the way aluminum does, and resists cracking when struck from below.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D to estimate the splitter's performance and confirm it balances the car across the various Ventus packages. OEM CAD data was used during the design process, giving a near-OEM fit and finish.\u003c\/p\u003e\n\u003cp\u003eBuilt for owners looking to combat front-end lift, increasing front downforce and traction at high speeds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e designed for compatibility with the standard factory bumper.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Front Splitter Blade\u003c\/li\u003e\n\u003cli\u003e(2) Splitter Support Rod\u003c\/li\u003e\n\u003cli\u003e(4) Splitter Support Clevis\u003c\/li\u003e\n\u003cli\u003e(1) Splitter Support Brace\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces lift \/ increases downforce\u003c\/li\u003e\n\u003cli\u003eImproved overall aerodynamic efficiency\u003c\/li\u003e\n\u003cli\u003eReduces lap times\u003c\/li\u003e\n\u003cli\u003eIncreases gas mileage\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on installation\u003c\/li\u003e\n\u003cli\u003eWill not pull under the vehicle like aluminum units\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD tested\u003c\/li\u003e\n\u003cli\u003eHard, durable plastic splitter body\u003c\/li\u003e\n\u003cli\u003eStainless hardware used throughout\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThis splitter is part of the Ventus 2 package for the Toyota GR86, designed to improve aerodynamic performance over factory in a safe, balanced way. Ventus 2 targets the enthusiast who frequents track days and wants a package that balances the car at speed — every component was designed to work together. The splitter suits anyone after additional front-end grip at speed, and balances out a range of rear aero devices.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0433A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556028346666,"sku":"A0433A","price":569.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0433A_5D_20Front_20Splitter_20-_20Toyota_20GR86.jpg?v=1789001505"},{"product_id":"two-piece-front-splitter-toyota-gr86","title":"Two-Piece Front Splitter - Toyota GR86","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Verus Engineering Two-Piece Front Splitter is designed to increase front-end downforce, work in concert with the Verus rear diffuser, and reduce lap times on track. The kit ships with the front splitter tie kit (PN A0004A) included, ensuring rigidity and durability from the two-piece blade system.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D to estimate on-car performance and to design the diffuser and splitter to work well together. In-house scan data was used throughout, resulting in a near-OEM fit and finish.\u003c\/p\u003e\n\u003cp\u003eThe two-piece design reduces cost through shipping savings and makes replacement easier — individual half-splitter pieces can be purchased if one is damaged.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo-Piece Splitter Blade (2)\u003c\/li\u003e\n\u003cli\u003eTwo-Piece Splitter Bracket\u003c\/li\u003e\n\u003cli\u003eCrash Beam Bracket (4)\u003c\/li\u003e\n\u003cli\u003eSplitter Tie Assembly (2)\u003c\/li\u003e\n\u003cli\u003eSplitter Clevis (2)\u003c\/li\u003e\n\u003cli\u003eSplitter Support Bracket (1)\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces lift \/ increases downforce\u003c\/li\u003e\n\u003cli\u003eImproved overall aerodynamic efficiency\u003c\/li\u003e\n\u003cli\u003eReduces lap times\u003c\/li\u003e\n\u003cli\u003eIncreases gas mileage\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD tested\u003c\/li\u003e\n\u003cli\u003eHard, durable plastic splitter body\u003c\/li\u003e\n\u003cli\u003eStainless hardware used throughout\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003ePart of the Ventus 1 package for the Toyota GR86, which decreases overall lift and reduces drag, improving the car's aerodynamic efficiency. The splitter creates a low-pressure zone beneath its underside and high pressure above, improving front-end downforce. Ventus 1 is a well-balanced package that helps the GR86 get more from its tires on track while also improving mileage on a daily driver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0459A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556029165866,"sku":"A0459A","price":449.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0459A_5D_20Two-Piece_20Front_20Splitter_20-_C2_A0Toyota_20GR86.jpg?v=1789001526"},{"product_id":"front-splitter-2022-subaru-brz","title":"Front Splitter - 2022+ Subaru BRZ","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Verus Engineering Front Splitter increases front-end downforce and reduces drag in a simple bolt-on package. It's made from a hard, durable, stiff plastic that won't bend under the car the way aluminum does, and resists cracking when struck from below.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D to estimate the splitter's performance and confirm it balances the car across the various Ventus packages. OEM CAD data was used during the design process, giving a near-OEM fit and finish.\u003c\/p\u003e\n\u003cp\u003eBuilt for owners looking to combat front-end lift, increasing front downforce and traction at high speeds.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Front Splitter Blade\u003c\/li\u003e\n\u003cli\u003e(2) Splitter Support Rod\u003c\/li\u003e\n\u003cli\u003e(4) Splitter Support Clevis\u003c\/li\u003e\n\u003cli\u003e(4) Splitter Tie Rod Extensions\u003c\/li\u003e\n\u003cli\u003e(1) Splitter Support Brace\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces lift \/ increases downforce\u003c\/li\u003e\n\u003cli\u003eImproved overall aerodynamic efficiency\u003c\/li\u003e\n\u003cli\u003eReduces lap times\u003c\/li\u003e\n\u003cli\u003eIncreases gas mileage\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD tested design\u003c\/li\u003e\n\u003cli\u003eHard, durable plastic composition\u003c\/li\u003e\n\u003cli\u003eStainless hardware used throughout\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThis splitter is part of the Ventus 2 package for the Subaru BRZ, designed to improve aerodynamic performance over factory in a safe, balanced way. Ventus 2 targets the enthusiast who frequents track days and wants a package that balances the car at speed — every component was designed to work together. The splitter suits anyone after additional front-end grip at speed, and balances out a range of rear aero devices.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0614A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits 2022 and newer Subaru BRZ.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556029985066,"sku":"A0614A","price":569.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0614A_5D_20Front_20Splitter_20-_202022_2B_20Subaru_20BRZ.jpg?v=1789001557"},{"product_id":"two-piece-front-splitter-2022-subaru-brz","title":"Two-Piece Front Splitter - 2022+ Subaru BRZ","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Verus Engineering Two-Piece Front Splitter is designed to increase front-end downforce, work in concert with the Verus rear diffuser, and reduce lap times on track. The kit ships with the front splitter tie kit (PN A0004A) included, ensuring rigidity and durability from the two-piece blade system.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D to estimate on-car performance and to design the diffuser and splitter to work well together. In-house scan data was used throughout, resulting in a near-OEM fit and finish.\u003c\/p\u003e\n\u003cp\u003eThe two-piece design reduces cost through shipping savings and makes replacement easier — individual half-splitter pieces can be purchased if one is damaged.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Two-Piece Splitter Blade\u003c\/li\u003e\n\u003cli\u003e(1) Two-Piece Splitter Bracket\u003c\/li\u003e\n\u003cli\u003e(4) Splitter Tie Rod Extensions\u003c\/li\u003e\n\u003cli\u003e(2) Splitter Tie Assembly\u003c\/li\u003e\n\u003cli\u003e(4) Splitter Clevis\u003c\/li\u003e\n\u003cli\u003e(1) Splitter Support Bracket\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces lift \/ increases downforce\u003c\/li\u003e\n\u003cli\u003eImproved overall aerodynamic efficiency\u003c\/li\u003e\n\u003cli\u003eReduces lap times\u003c\/li\u003e\n\u003cli\u003eIncreases gas mileage\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD tested design\u003c\/li\u003e\n\u003cli\u003eHard, durable plastic composition\u003c\/li\u003e\n\u003cli\u003eStainless hardware used throughout\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003ePart of the Ventus 1 package, which decreases overall lift and reduces drag, improving the car's aerodynamic efficiency. The splitter creates a low-pressure zone beneath its underside and high pressure above, improving front-end downforce. Ventus 1 is a well-balanced package that helps the car get more from its tires on track while also improving mileage on a daily driver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0615A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits 2022 and newer Subaru BRZ.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556032442666,"sku":"A0615A","price":459.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0615A_5D_20Two-Piece_20Front_20Splitter_20-_C2_A02022_2B_20Subaru_20BRZ.jpg?v=1789001573"},{"product_id":"front-splitter-kit-mk5-toyota-supra","title":"Front Splitter Kit - Mk5 Toyota Supra","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eFront splitters produce front-end downforce with minimal drag increase by creating a large pressure delta between the top and bottom surfaces. Using scan data taken directly from the car alongside CFD, this splitter was developed to pair with the Verus UCW rear wing and comfortably handle the loads it sees. It mounts at multiple chassis locations for a strong, durable install, with all hardware locations recessed for improved aerodynamic performance.\u003c\/p\u003e\n\u003cp\u003eThe blade is produced from carbon polyweave, the same material used in top-tier motorsport. It isn't brittle, so it avoids the cracking common to carbon fiber and ABS, and it won't grab and bend under the car the way aluminum units can. It's also light and stiff — an ideal splitter material.\u003c\/p\u003e\n\u003cp\u003eThe air dam brings the splitter flat with the underbody to improve performance further, produced from sheet aluminum and powder-coated black for durability.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo-Piece Carbon Polyweave Splitter Blade\u003c\/li\u003e\n\u003cli\u003eTwo-Piece Aluminum Front Air Dam\u003c\/li\u003e\n\u003cli\u003eSheet Aluminum \/ Steel Chassis Bracket (10 pieces)\u003c\/li\u003e\n\u003cli\u003eRubber Splitter Edge Seal\u003c\/li\u003e\n\u003cli\u003eHardware Kit including all necessary bolts, nuts and washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGreatly increases front-end downforce\u003c\/li\u003e\n\u003cli\u003eProduces high downforce suitable for large rear wings\u003c\/li\u003e\n\u003cli\u003eCapable of handling 300+ lbs\u003c\/li\u003e\n\u003cli\u003eCarbon polyweave construction — strength, low weight, durability and appearance\u003c\/li\u003e\n\u003cli\u003eSame material used in Indy Car, NASCAR and F1\u003c\/li\u003e\n\u003cli\u003eIntegrated air dam that follows the front bumper lines closely\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon polyweave front splitter\u003c\/li\u003e\n\u003cli\u003eWill not grab and bend surfaces like aluminum units\u003c\/li\u003e\n\u003cli\u003eWill not crack and break like carbon and ABS units\u003c\/li\u003e\n\u003cli\u003eAbrasion resistant while remaining stiff\u003c\/li\u003e\n\u003cli\u003e5052 aluminum air dam\u003c\/li\u003e\n\u003cli\u003eCNC cut and bent brackets\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eProperly designed front splitters greatly increase front-end grip. Iterative design work using state-of-the-art analysis software extracted more performance from the splitter and air dam combination, and sized the splitter and dive planes to counteract the rear wing and diffuser — creating a safe, effective aero balance, which matters since an unbalanced car is harder to drive at the limit.\u003c\/p\u003e\n\u003cp\u003eThis splitter is part of the Ventus 2 and 3 packages for the Mk5 Supra, which boost downforce significantly over the factory car while retaining street usability through reasonable splitter protrusion and rear wing widths.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0232A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556114952490,"sku":"A0232A","price":1899.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0232A_5D_20Front_20Splitter_20Kit_20-_20Mk5_20Toyota_20Supra_3ca60e7a-56f2-45dc-bea2-b2cf75019bab.jpg?v=1789002960"},{"product_id":"high-downforce-front-splitter-kit-mk5-toyota-supra","title":"High Downforce Front Splitter Kit - Mk5 Toyota Supra","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eDeveloped in response to customers asking for a splitter that makes more downforce, allowing higher rear wing angles of attack and lower lap times. This tunneled front splitter bolts on in the same fashion as the standard Verus splitter and makes \u003cstrong\u003e27% more front downforce\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt mounts at multiple chassis locations for a strong, durable install, with all hardware locations recessed for improved aerodynamic performance.\u003c\/p\u003e\n\u003cp\u003eThe blade is produced from carbon polyweave, the same material used in top-tier motorsport. It isn't brittle, so it avoids the cracking common to carbon fiber and ABS, and it won't grab and bend under the car the way aluminum units can. The air dam brings the splitter flat with the underbody, produced from sheet aluminum and powder-coated black for durability.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Carbon Polyweave Splitter Blade\u003c\/li\u003e\n\u003cli\u003e(2) Sheet Aluminum Air Dam\u003c\/li\u003e\n\u003cli\u003e(2) Carbon Fiber Splitter Diffuser\u003c\/li\u003e\n\u003cli\u003e(1) Chassis Mount Bracket Kit (10 pieces, steel and aluminum)\u003c\/li\u003e\n\u003cli\u003e(1) Rubber Splitter Edge Seal\u003c\/li\u003e\n\u003cli\u003e(2) Cut Template\u003c\/li\u003e\n\u003cli\u003eHardware Kit including all necessary bolts, nuts and washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGreatly increases front-end downforce\u003c\/li\u003e\n\u003cli\u003eProduces high downforce suitable for large rear wings\u003c\/li\u003e\n\u003cli\u003eCapable of handling 300+ lbs\u003c\/li\u003e\n\u003cli\u003eCarbon polyweave construction — strength, low weight, durability and appearance\u003c\/li\u003e\n\u003cli\u003eSame material used in Indy Car, NASCAR and F1\u003c\/li\u003e\n\u003cli\u003eIntegrated air dam that follows the front bumper lines closely\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon polyweave front splitter\u003c\/li\u003e\n\u003cli\u003eWill not grab and bend surfaces like aluminum units\u003c\/li\u003e\n\u003cli\u003eWill not crack and break like carbon and ABS units\u003c\/li\u003e\n\u003cli\u003eAbrasion resistant while remaining stiff\u003c\/li\u003e\n\u003cli\u003e5052 aluminum air dam\u003c\/li\u003e\n\u003cli\u003e2x2 twill carbon splitter diffuser\u003c\/li\u003e\n\u003cli\u003eCNC cut and bent brackets\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eIterative design work using state-of-the-art analysis software extracted more performance from the splitter, splitter diffuser tunnels and air dam combination, and sized the splitter and dive planes to counteract the rear wing and diffuser for a safe, effective aero balance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e with this splitter you will need to run your rear wing at a higher angle of attack than with the standard Verus splitter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0420A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556123046186,"sku":"A0420A","price":2599.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0420A_5D_20High_20Downforce_20Front_20Splitter_20Kit_20-_20Mk5_20Toyota_20Supra_607f812d-ca62-48d7-b357-942a6ae415d0.webp?v=1789003216"},{"product_id":"front-splitter-support-kit-toyota-supra","title":"Front Splitter Support Kit - Toyota Supra","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Verus Engineering Splitter Support Kit reduces deflection in the factory crash beam that the Verus splitters attach to — cutting deflection by roughly \u003cstrong\u003e85% under a 160 lb load\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIncreasing the rigidity of the factory bar means it won't fatigue and break over time, and the splitter itself deflects less at speed.\u003c\/p\u003e\n\u003cp\u003eA strong option for anyone wanting to tie the lower crash beam to a stronger, more rigid part of the chassis easily and without additional parts.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSplitter Tie Assembly (2)\u003c\/li\u003e\n\u003cli\u003eLH Rod End, stainless\u003c\/li\u003e\n\u003cli\u003eRH Rod End, stainless\u003c\/li\u003e\n\u003cli\u003eLH Nut, stainless\u003c\/li\u003e\n\u003cli\u003eRH Nut, stainless\u003c\/li\u003e\n\u003cli\u003eSupport Rod\u003c\/li\u003e\n\u003cli\u003eSplitter Clevis, no threads (4)\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all necessary hardware and install tools for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces lift \/ increases downforce\u003c\/li\u003e\n\u003cli\u003eIncreases structural rigidity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBillet aluminum splitter ties\u003c\/li\u003e\n\u003cli\u003eBillet aluminum clevis\u003c\/li\u003e\n\u003cli\u003eStainless rod ends and nuts\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0509A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556125241642,"sku":"A0509A","price":109.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0509A_5D_20Front_20Splitter_20Support_20Kit_20-_20Toyota_20Supra_bd10d159-cc68-48f7-b655-2471c2af1f9d.jpg?v=1789003328"},{"product_id":"carbon-polyweave-adjustable-front-splitter-brz-frs-gt86","title":"Carbon Polyweave Adjustable Front Splitter - BRZ\/FRS\/GT86","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eFront splitters produce front-end downforce with minimal drag increase, thanks to the large pressure delta between their top and bottom surfaces.\u003c\/p\u003e\n\u003cp\u003eThe Verus Composite Adjustable Front Splitter is four splitter sizes in one — it extends between 2 and 5 inches from the front bumper, letting you balance a variety of rear aerodynamic devices. It's constructed from durable, lightweight carbon thermoplastic and mounts to chassis hardpoints through six splitter ties, so it handles high downforce loads. That material is the same one used in top-tier motorsport and isn't brittle: no cracking like carbon or ABS, no bending under the car like aluminum.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D to extract more performance from the available build volume, and in-house scan data gives a near-OEM fit and finish.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComposite Front Splitter Blade\u003c\/li\u003e\n\u003cli\u003eComposite Front Splitter Extension (4)\u003c\/li\u003e\n\u003cli\u003eFront Splitter Clevis (10)\u003c\/li\u003e\n\u003cli\u003eFront Splitter Support Rod Assembly (6)\u003c\/li\u003e\n\u003cli\u003eFront Splitter Support Rod Extension (6)\u003c\/li\u003e\n\u003cli\u003eCrash Beam Mounting Bracket (4)\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all necessary pieces for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces lift \/ increases downforce\u003c\/li\u003e\n\u003cli\u003eImproved overall aerodynamic efficiency\u003c\/li\u003e\n\u003cli\u003eReduces lap times\u003c\/li\u003e\n\u003cli\u003eIncreases gas mileage\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD optimized design\u003c\/li\u003e\n\u003cli\u003eCarbon thermoplastic composition\u003c\/li\u003e\n\u003cli\u003eStainless hardware used throughout\u003c\/li\u003e\n\u003cli\u003eAdjustable design, 2 to 5 inches longitudinally\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe splitter creates a large high-pressure zone above it and a large low-pressure zone beneath, producing front downforce. Being able to adjust how far it protrudes lets the owner tune front downforce to improve aerodynamic balance. It can form part of the Ventus 1 package; the Ventus 2 package goes further on downforce.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0036A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556176523562,"sku":"A0036A","price":1699.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0036A_5D_20Carbon_20Polyweave_20Adjustable_20Front_20Splitter_20-_20BRZ-FRS-GT86.jpg?v=1789003845"},{"product_id":"street-front-splitter-2013-2016-brz-frs-gt86","title":"Street Front Splitter - 2013-2016 BRZ\/FRS\/GT86","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Verus Engineering Street Front Splitter increases front-end downforce and reduces drag in a simple bolt-on package. It's made from a hard, durable, stiff plastic that won't bend under the car the way aluminum does, and resists cracking when struck from below.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D to estimate performance and confirm the splitter balances the car across the various Ventus packages. OEM CAD data was used during design, giving a near-OEM fit and finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e bolts to 2013–2016 bumpers only. For 2017+ cars, see the respective front splitter kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e this kit does not include the Race Upgrade mounting kit (A0004A). Verus recommends running that upgrade if the car regularly sees speeds over 100 MPH.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront Splitter Blade\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces lift \/ increases downforce\u003c\/li\u003e\n\u003cli\u003eImproved overall aerodynamic efficiency\u003c\/li\u003e\n\u003cli\u003eReduces lap times\u003c\/li\u003e\n\u003cli\u003eIncreases gas mileage\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on installation\u003c\/li\u003e\n\u003cli\u003eWill not pull under the vehicle like aluminum units\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD tested\u003c\/li\u003e\n\u003cli\u003eHard, durable plastic splitter body\u003c\/li\u003e\n\u003cli\u003eStainless hardware used throughout\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003ePart of the Ventus 1 package, designed to improve aerodynamic performance over factory in a safe, balanced way for the enthusiast who frequents track days. A good choice for additional front-end grip at speed, and effective at balancing out various rear aero devices.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0001A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556177441066,"sku":"A0001A","price":399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0001A_5D_20Street_20Front_20Splitter_20-_202013-2016_20BRZ-FRS-GT86.jpg?v=1789003865"},{"product_id":"race-splitter-upgrade-brz-frs-gt86","title":"Race Splitter Upgrade - BRZ\/FRS\/GT86","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Verus Engineering Race Splitter Upgrade increases the structural rigidity of your front splitter. By tying the splitter's leading edge to a structural point on the chassis, the splitter handles the loads it sees at triple-digit speeds without deformation.\u003c\/p\u003e\n\u003cp\u003eRecommended alongside the Street Front Splitter (A0001A) for any car that regularly sees speeds over 100 MPH.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCrash Beam Bracket (4)\u003c\/li\u003e\n\u003cli\u003eSplitter Tie Assembly (2)\u003c\/li\u003e\n\u003cli\u003eSplitter Clevis (2)\u003c\/li\u003e\n\u003cli\u003eSplitter Support Bracket (1)\u003c\/li\u003e\n\u003cli\u003eSplitter Vane (8)\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all necessary hardware for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces lift \/ increases downforce\u003c\/li\u003e\n\u003cli\u003eIncreases structural rigidity\u003c\/li\u003e\n\u003cli\u003eReduces lap times\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e5052-H32 sheet aluminum composition\u003c\/li\u003e\n\u003cli\u003eBillet aluminum splitter ties and rod ends\u003c\/li\u003e\n\u003cli\u003eHard-anodized throughout for durability\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe race upgrade is part of the Ventus 1 package, designed to improve aerodynamic performance over factory in a safe, balanced way, with every component designed to work together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0004A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556177801514,"sku":"A0004A","price":179.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0004A_5D_20Race_20Splitter_20Upgrade_20-_20BRZ-FRS-GT86.jpg?v=1789003880"},{"product_id":"two-piece-front-splitter-brz-frs-gt86-2017-2021","title":"Two-Piece Front Splitter - BRZ\/FRS\/GT86 (2017-2021)","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Verus Engineering Two-Piece Front Splitter increases front-end downforce, works in concert with the Verus rear diffuser, and reduces lap times on track. The kit ships with the front splitter tie kit (PN A0004A) included, ensuring rigidity and durability from the two-piece blade system.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D to estimate on-car performance and design the diffuser and splitter to work well together. In-house scan data gives a near-OEM fit and finish.\u003c\/p\u003e\n\u003cp\u003eThe two-piece design reduces cost through shipping savings and makes replacement easier — individual half-splitter pieces can be purchased if one is damaged.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Two-Piece Splitter Blade\u003c\/li\u003e\n\u003cli\u003e(1) Two-Piece Splitter Bracket\u003c\/li\u003e\n\u003cli\u003e(4) Crash Beam Bracket\u003c\/li\u003e\n\u003cli\u003e(2) Splitter Tie Assembly\u003c\/li\u003e\n\u003cli\u003e(2) Splitter Clevis\u003c\/li\u003e\n\u003cli\u003e(1) Splitter Support Bracket\u003c\/li\u003e\n\u003cli\u003e(1) Hardware Kit, including all hardware necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces lift \/ increases downforce\u003c\/li\u003e\n\u003cli\u003eImproved overall aerodynamic efficiency\u003c\/li\u003e\n\u003cli\u003eReduces lap times\u003c\/li\u003e\n\u003cli\u003eIncreases gas mileage\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD tested design\u003c\/li\u003e\n\u003cli\u003eHard, durable plastic composition\u003c\/li\u003e\n\u003cli\u003eStainless hardware used throughout\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003ePart of the Ventus 1 package, designed to improve aerodynamic performance over factory in a safe, balanced way for the enthusiast who frequents track days. A good choice for additional front-end grip at speed, and effective at balancing out various rear aero devices.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0202A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits 2017–2021 BRZ, FRS and GT86.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556260442410,"sku":"A0202A","price":449.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0202A_5D_20Two-Piece_20Front_20Splitter_20-_20BRZ-FRS-GT86_20_282017-2021_29.jpg?v=1789004401"},{"product_id":"two-piece-front-splitter-brz-frs-gt86-2013-2016","title":"Two-Piece Front Splitter - BRZ\/FRS\/GT86 (2013-2016)","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Verus Engineering Two-Piece Front Splitter increases front-end downforce, works in concert with the Verus rear diffuser, and reduces lap times on track. The kit ships with the front splitter tie kit (PN A0004A) included, ensuring rigidity and durability from the two-piece blade system.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D to estimate on-car performance and design the diffuser and splitter to work well together. In-house scan data gives a near-OEM fit and finish.\u003c\/p\u003e\n\u003cp\u003eThe two-piece design reduces cost through shipping savings and makes replacement easier — individual half-splitter pieces can be purchased if one is damaged.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Two-Piece Splitter Blade\u003c\/li\u003e\n\u003cli\u003e(1) Two-Piece Splitter Bracket\u003c\/li\u003e\n\u003cli\u003e(4) Crash Beam Bracket\u003c\/li\u003e\n\u003cli\u003e(2) Splitter Tie Assembly\u003c\/li\u003e\n\u003cli\u003e(2) Splitter Clevis\u003c\/li\u003e\n\u003cli\u003e(1) Splitter Support Bracket\u003c\/li\u003e\n\u003cli\u003e(1) Hardware Kit, including all hardware necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces lift \/ increases downforce\u003c\/li\u003e\n\u003cli\u003eImproved overall aerodynamic efficiency\u003c\/li\u003e\n\u003cli\u003eReduces lap times\u003c\/li\u003e\n\u003cli\u003eIncreases gas mileage\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD tested design\u003c\/li\u003e\n\u003cli\u003eHard, durable plastic composition\u003c\/li\u003e\n\u003cli\u003eStainless hardware used throughout\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003ePart of the Ventus 1 package, designed to improve aerodynamic performance over factory in a safe, balanced way for the enthusiast who frequents track days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0091A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits 2013–2016 BRZ, FRS and GT86.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556260737322,"sku":"A0091A","price":449.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0091A_5D_20Two-Piece_20Front_20Splitter_20-_20BRZ-FRS-GT86_20_282013-2016_29.jpg?v=1789004417"},{"product_id":"front-splitter-kit-brz-gt86-2017-2021","title":"Front Splitter Kit - BRZ\/GT86 (2017-2021)","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Verus Engineering Street Front Splitter increases front-end downforce and reduces drag in a simple bolt-on package. It's made from a hard, durable, stiff plastic that won't bend under the car the way aluminum does, and resists cracking when struck from below.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D to estimate performance and confirm the splitter balances the car across the various Ventus packages. In-house scan data gives a near-OEM fit and finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e bolts to 2017+ bumpers only. For 2013–2016 cars, see the respective front splitter kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e the 2017+ kit includes the race upgrade kit automatically, due to the location of the splitter mounting.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSplitter Blade, 2017+ design\u003c\/li\u003e\n\u003cli\u003eCrash Beam Bracket (4)\u003c\/li\u003e\n\u003cli\u003eSplitter Tie Assembly (2)\u003c\/li\u003e\n\u003cli\u003eSplitter Clevis (2)\u003c\/li\u003e\n\u003cli\u003eSplitter Support Bracket\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all necessary hardware for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces lift \/ increases downforce\u003c\/li\u003e\n\u003cli\u003eImproved overall aerodynamic efficiency\u003c\/li\u003e\n\u003cli\u003eReduces lap times\u003c\/li\u003e\n\u003cli\u003eIncreases gas mileage\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on installation\u003c\/li\u003e\n\u003cli\u003eWill not pull under the vehicle like aluminum units\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD tested\u003c\/li\u003e\n\u003cli\u003eHard, durable plastic composition\u003c\/li\u003e\n\u003cli\u003eStainless hardware used throughout\u003c\/li\u003e\n\u003cli\u003eChassis-mounted splitter support rods\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003ePart of the Ventus 1 package, designed to improve aerodynamic performance over factory in a safe, balanced way for the enthusiast who frequents track days. A good choice for additional front-end grip at speed, and effective at balancing out various rear aero devices.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0124A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits 2017–2021 Subaru BRZ and Toyota GT86.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556260802858,"sku":"A0124A","price":574.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0124A_5D_20Front_20Splitter_20Kit_20-_20BRZ-GT86_20_282017-2021_29.jpg?v=1789004433"},{"product_id":"front-splitter-miata-mx5-nd","title":"Front Splitter - Miata MX5 (ND)","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Verus Engineering Front Splitter balances moderate rear aerodynamic loads and increases front-end grip on the ND Miata at high speeds.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D to ensure the splitter generates enough downforce to offset rear downforce-producing components. In-house scan data gives a near-OEM fit and finish.\u003c\/p\u003e\n\u003cp\u003eBuilt for owners looking to combat front-end lift, increasing front downforce and corner traction at speed.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront Splitter Blade\u003c\/li\u003e\n\u003cli\u003eFront Splitter Bracket\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces lift \/ increases downforce\u003c\/li\u003e\n\u003cli\u003eImproved overall aerodynamic efficiency\u003c\/li\u003e\n\u003cli\u003eReduces lap times\u003c\/li\u003e\n\u003cli\u003eIncreases gas mileage\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD tested design\u003c\/li\u003e\n\u003cli\u003eHard, durable plastic composition\u003c\/li\u003e\n\u003cli\u003eStainless hardware used throughout\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe splitter negates some of the front-end lift the ND Miata carries from factory. Paired with the Verus rear diffuser the car reaches a good aero balance with reduced overall drag — since both parts cut lift and drag, aerodynamic efficiency improves. The result is more front tire grip at speed, lower lap times and better overall handling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0088A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556636881194,"sku":"A0088A","price":429.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0088A_5D_20Front_20Splitter_20-_20Miata_20MX5_20_28ND_29.jpg?v=1789008884"},{"product_id":"front-splitter-kit-ford-mustang-shelby-gt350","title":"Front Splitter Kit - Ford Mustang Shelby GT350","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eFront splitters produce front-end downforce with minimal drag increase by creating a large pressure delta between their top and bottom surfaces. Using scan data taken directly from the car alongside CFD, this splitter was developed to pair with the UCW Rear Wing Kit and comfortably handles the downforce that pairing generates.\u003c\/p\u003e\n\u003cp\u003eIt mounts to two main chassis locations with quick releases — strong and durable, but easy to remove. All hardware locations are recessed for improved aerodynamic performance and a factory-like finish.\u003c\/p\u003e\n\u003cp\u003eThe blade is produced from carbon polyweave, the same material used in top-tier motorsport. It isn't brittle, so it avoids the cracking common to carbon fiber and ABS, and it won't grab and bend under the car the way aluminum units can. The air dam brings the splitter flat with the underbody, made from sheet aluminum and powder-coated black.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Carbon Polyweave Splitter Blade\u003c\/li\u003e\n\u003cli\u003e(1) Sheet Aluminum Air Dam (3 pieces)\u003c\/li\u003e\n\u003cli\u003e(1) Aluminium Splitter Mounting Bracket Assembly\u003c\/li\u003e\n\u003cli\u003e(1) Hardware Kit including all necessary hardware for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGreatly increases front-end downforce\u003c\/li\u003e\n\u003cli\u003eProduces high downforce suitable for large rear wings\u003c\/li\u003e\n\u003cli\u003eCapable of handling 300+ lbs\u003c\/li\u003e\n\u003cli\u003eCarbon polyweave construction — strength, low weight, durability and appearance\u003c\/li\u003e\n\u003cli\u003eSame material used in Indy Car, NASCAR and F1\u003c\/li\u003e\n\u003cli\u003eIntegrated air dam that follows the front bumper lines closely\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon polyweave front splitter\u003c\/li\u003e\n\u003cli\u003eWill not grab and bend surfaces like aluminum units\u003c\/li\u003e\n\u003cli\u003eWill not crack and break like carbon and ABS units\u003c\/li\u003e\n\u003cli\u003eAbrasion resistant while remaining stiff\u003c\/li\u003e\n\u003cli\u003e5052 aluminum air dam\u003c\/li\u003e\n\u003cli\u003eCNC cut and bent brackets\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eIterative design work extracted more performance from the splitter and air dam combination, and sized the splitter and dive planes to counteract the rear wing and diffuser for a safe, effective aero balance. Part of the Ventus 3 package for the GT350, which boosts downforce significantly over factory while keeping the car street-usable through reasonable splitter protrusion and wing widths.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0285A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556671779114,"sku":"A0285A","price":2199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0285A_5D_20Front_20Splitter_20Kit_20-_20Ford_20Mustang_20Shelby_20GT350.jpg?v=1789009189"},{"product_id":"front-splitter-kit-porsche-718-gt4","title":"Front Splitter Kit - Porsche 718 GT4","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eFront splitters produce front-end downforce without significantly increasing drag, by creating a large pressure delta between their top and bottom surfaces. This one was sized against the rear wing to hold a proper aero balance and reduce lap times.\u003c\/p\u003e\n\u003cp\u003eThe splitter is produced from carbon thermoplastic, the same material used in top-tier motorsport. It isn't brittle, so no cracking like carbon fiber or ABS, and it won't grab and bend under the car like aluminum. It abrades and takes a beating without losing performance or appearance.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Carbon Composite Splitter, left-hand\u003c\/li\u003e\n\u003cli\u003e(1) Carbon Composite Splitter, right-hand\u003c\/li\u003e\n\u003cli\u003e(7 pieces) Sheet Metal Bracket Kit\u003c\/li\u003e\n\u003cli\u003e(1) Cross Brace Beam\u003c\/li\u003e\n\u003cli\u003e(1) Splitter Tie\u003c\/li\u003e\n\u003cli\u003e(1) Machined Clevis\u003c\/li\u003e\n\u003cli\u003e(1) Hardware Kit including all necessary bolts, nuts and washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGreatly increases front-end downforce\u003c\/li\u003e\n\u003cli\u003eProduces high downforce suitable for large rear wings\u003c\/li\u003e\n\u003cli\u003eCapable of handling 300+ lbs\u003c\/li\u003e\n\u003cli\u003eCarbon thermoplastic construction — strength, low weight, durability and appearance\u003c\/li\u003e\n\u003cli\u003eSame material used in Indy Car, NASCAR and F1\u003c\/li\u003e\n\u003cli\u003eNon-invasive, easy install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon thermoplastic front splitter\u003c\/li\u003e\n\u003cli\u003eWill not grab and bend surfaces like aluminum units\u003c\/li\u003e\n\u003cli\u003eWill not crack and break like carbon and ABS units\u003c\/li\u003e\n\u003cli\u003eAbrasion resistant while remaining stiff\u003c\/li\u003e\n\u003cli\u003eCarbon fiber air dam\u003c\/li\u003e\n\u003cli\u003eCNC cut and bent brackets\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eIterative design work extracted more performance from the splitter, air dam and diffuser combination, sizing the splitter and dive planes to counteract the rear wing and diffuser for a safe, effective aero balance. Part of the Ventus 2 kit for the 718 GT4, which boosts downforce significantly over factory while keeping the car street-usable through reasonable splitter protrusion and wing widths.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0300A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556774834474,"sku":"A0300A","price":3299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0300A_5D_20Front_20Splitter_20Kit_20-_20Porsche_20718_20GT4.jpg?v=1789009837"},{"product_id":"front-splitter-kit-porsche-981-gt4-cayman","title":"Front Splitter Kit - Porsche 981 GT4 Cayman","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eFront splitters produce front-end downforce without significantly increasing drag, by creating a large pressure delta between their top and bottom surfaces. This one adds design tweaks to the splitter's underside, working with the carbon splitter diffusers to improve flow.\u003c\/p\u003e\n\u003cp\u003eThe splitter is produced from carbon thermoplastic, the same material used in top-tier motorsport — not brittle, so no cracking like carbon fiber or ABS, and it won't grab and bend under the car like aluminum.\u003c\/p\u003e\n\u003cp\u003eThe air dam brings the splitter flat with the underbody, produced from pre-preg carbon fiber and autoclave cured for reduced weight and improved strength.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping note:\u003c\/strong\u003e ships via freight on a pallet due to the size of the package.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Spill Plate (2)\u003c\/li\u003e\n\u003cli\u003eCarbon Front Air Dam\u003c\/li\u003e\n\u003cli\u003eCarbon Composite Splitter\u003c\/li\u003e\n\u003cli\u003eCarbon Splitter Diffuser (2)\u003c\/li\u003e\n\u003cli\u003eSheet Aluminum Bracket (10 pieces)\u003c\/li\u003e\n\u003cli\u003eHardware Kit including all necessary bolts, nuts and washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGreatly increases front-end downforce\u003c\/li\u003e\n\u003cli\u003eProduces high downforce suitable for large rear wings\u003c\/li\u003e\n\u003cli\u003eCapable of handling 300+ lbs\u003c\/li\u003e\n\u003cli\u003eCarbon thermoplastic construction — strength, low weight, durability and appearance\u003c\/li\u003e\n\u003cli\u003eSame material used in Indy Car, NASCAR and F1\u003c\/li\u003e\n\u003cli\u003eNon-invasive, easy install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon thermoplastic front splitter\u003c\/li\u003e\n\u003cli\u003eWill not grab and bend surfaces like aluminum units\u003c\/li\u003e\n\u003cli\u003eWill not crack and break like carbon and ABS units\u003c\/li\u003e\n\u003cli\u003eAbrasion resistant while remaining stiff\u003c\/li\u003e\n\u003cli\u003eCarbon fiber air dam with aircraft nut plates\u003c\/li\u003e\n\u003cli\u003eCNC cut and bent brackets\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eIterative design work extracted more performance from the splitter, air dam and diffuser combination, sizing the splitter and dive planes to counteract the rear wing and diffuser for a safe, effective aero balance. Part of the Ventus 2 kit for the 981 GT4.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0153A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556789514538,"sku":"A0153A","price":5899.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0153A_5D_20Front_20Splitter_20Kit_20-_20Porsche_20981_20GT4_20Cayman.jpg?v=1789009924"},{"product_id":"front-splitter-kit-porsche-cayman-987-2-only","title":"Front Splitter Kit - Porsche Cayman, 987.2 Only","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eFront splitters produce front-end downforce without significantly increasing drag, by creating a large pressure delta between their top and bottom surfaces. This one adds design tweaks to the splitter's underside to improve flow while working with the OE plastic underbody panels.\u003c\/p\u003e\n\u003cp\u003eThe splitter is produced from carbon thermoplastic, the same material used in top-tier motorsport — not brittle, so no cracking like carbon fiber or ABS, and it won't grab and bend under the car like aluminum.\u003c\/p\u003e\n\u003cp\u003eThe air dam brings the splitter flat with the underbody, produced from pre-preg carbon fiber and autoclave cured for reduced weight and improved strength.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e 987.2 only. This will not fit a 987.1.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping note:\u003c\/strong\u003e ships via freight on a pallet due to the size of the package.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Front Air Dam\u003c\/li\u003e\n\u003cli\u003eCarbon Composite Front Splitter Blade\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGreatly increases front-end downforce\u003c\/li\u003e\n\u003cli\u003eProduces high downforce suitable for large rear wings\u003c\/li\u003e\n\u003cli\u003eCapable of handling 300+ lbs\u003c\/li\u003e\n\u003cli\u003eCarbon thermoplastic construction — strength, low weight, durability and appearance\u003c\/li\u003e\n\u003cli\u003eSame material used in Indy Car, NASCAR and F1\u003c\/li\u003e\n\u003cli\u003eNon-invasive install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon thermoplastic front splitter\u003c\/li\u003e\n\u003cli\u003eWill not grab and bend surfaces like aluminum units\u003c\/li\u003e\n\u003cli\u003eWill not crack and break like carbon and ABS units\u003c\/li\u003e\n\u003cli\u003eAbrasion resistant while remaining stiff\u003c\/li\u003e\n\u003cli\u003eCarbon fiber air dam with aircraft nut plates\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eIterative design work extracted more performance from the splitter and air dam combination, sizing the splitter and dive planes to counteract the rear wing and diffuser for a safe, effective aero balance. Part of the Ventus 2 kit for the 987.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0135A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556817170730,"sku":"A0135A","price":2995.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0135A_5D_20Front_20Splitter_20Kit_20-_20Porsche_20Cayman_2C_20987.jpg?v=1789010354"},{"product_id":"front-splitter-kit-porsche-991-1-gt3","title":"Front Splitter Kit - Porsche 991.1 GT3","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eFront splitters produce front-end downforce without significantly increasing drag, by creating a large pressure delta between their top and bottom surfaces. This one was sized against the rear wing to hold a proper aero balance and reduce lap times.\u003c\/p\u003e\n\u003cp\u003eThe splitter is produced from carbon thermoplastic, the same material used in top-tier motorsport. It isn't brittle, so no cracking like carbon fiber or ABS, and it won't grab and bend under the car like aluminum. It abrades and takes a beating without losing performance or appearance.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Carbon Composite Splitter, left-hand\u003c\/li\u003e\n\u003cli\u003e(1) Carbon Composite Splitter, right-hand\u003c\/li\u003e\n\u003cli\u003e(11 pieces) Sheet Metal Bracket Kit\u003c\/li\u003e\n\u003cli\u003e(1) Cross Brace Beam\u003c\/li\u003e\n\u003cli\u003e(2) Splitter Tie\u003c\/li\u003e\n\u003cli\u003e(4) Machined Clevis\u003c\/li\u003e\n\u003cli\u003e(1) Hardware Kit including all necessary bolts, nuts and washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGreatly increases front-end downforce\u003c\/li\u003e\n\u003cli\u003eProduces high downforce suitable for large rear wings\u003c\/li\u003e\n\u003cli\u003eCapable of handling 300+ lbs\u003c\/li\u003e\n\u003cli\u003eCarbon thermoplastic construction — strength, low weight, durability and appearance\u003c\/li\u003e\n\u003cli\u003eSame material used in Indy Car, NASCAR and F1\u003c\/li\u003e\n\u003cli\u003eNon-invasive, easy install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon thermoplastic front splitter\u003c\/li\u003e\n\u003cli\u003eWill not grab and bend surfaces like aluminum units\u003c\/li\u003e\n\u003cli\u003eWill not crack and break like carbon and ABS units\u003c\/li\u003e\n\u003cli\u003eAbrasion resistant while remaining stiff\u003c\/li\u003e\n\u003cli\u003eCNC cut and bent brackets\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eThe splitter was sized specifically for the UCW rear wing blade upgrade Verus designed for the GT3, giving a safe, effective aero balance. Part of the Ventus 3 kit for the 991 GT3, which boosts downforce significantly over factory while keeping the car street-usable through reasonable splitter protrusion and wing widths.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0244A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 991.1 GT3 only.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556837552426,"sku":"A0244A","price":3599.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0244A_5D_20Front_20Splitter_20Kit_20-_20Porsche_20991.jpg?v=1789010594"},{"product_id":"front-splitter-kit-porsche-991-2-gt3","title":"Front Splitter Kit - Porsche 991.2 GT3","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eFront splitters produce front-end downforce without significantly increasing drag, by creating a large pressure delta between their top and bottom surfaces. This one was sized against the rear wing to hold a proper aero balance and reduce lap times.\u003c\/p\u003e\n\u003cp\u003eThe splitter is produced from carbon thermoplastic, the same material used in top-tier motorsport. It isn't brittle, so no cracking like carbon fiber or ABS, and it won't grab and bend under the car like aluminum. It abrades and takes a beating without losing performance or appearance.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Carbon Composite Splitter, left-hand\u003c\/li\u003e\n\u003cli\u003e(1) Carbon Composite Splitter, right-hand\u003c\/li\u003e\n\u003cli\u003e(11 pieces) Sheet Metal Bracket Kit\u003c\/li\u003e\n\u003cli\u003e(1) Cross Brace Beam\u003c\/li\u003e\n\u003cli\u003e(2) Splitter Tie\u003c\/li\u003e\n\u003cli\u003e(4) Machined Clevis\u003c\/li\u003e\n\u003cli\u003e(1) Hardware Kit including all necessary bolts, nuts and washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGreatly increases front-end downforce\u003c\/li\u003e\n\u003cli\u003eProduces high downforce suitable for large rear wings\u003c\/li\u003e\n\u003cli\u003eCapable of handling 300+ lbs\u003c\/li\u003e\n\u003cli\u003eCarbon thermoplastic construction — strength, low weight, durability and appearance\u003c\/li\u003e\n\u003cli\u003eSame material used in Indy Car, NASCAR and F1\u003c\/li\u003e\n\u003cli\u003eNon-invasive, easy install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon thermoplastic front splitter\u003c\/li\u003e\n\u003cli\u003eWill not grab and bend surfaces like aluminum units\u003c\/li\u003e\n\u003cli\u003eWill not crack and break like carbon and ABS units\u003c\/li\u003e\n\u003cli\u003eAbrasion resistant while remaining stiff\u003c\/li\u003e\n\u003cli\u003eCNC cut and bent brackets\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eSized specifically for the UCW rear wing blade upgrade Verus designed for the GT3, giving a safe, effective aero balance. Part of the Ventus 3 kit for the 991 GT3.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0213A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 991.2 GT3 only — not the 991.1, and not the GT3 RS.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556842238250,"sku":"A0213A","price":3599.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0213A_5D_20Front_20Splitter_20Kit_20-_20Porsche_20991.jpg?v=1789010701"},{"product_id":"front-splitter-kit-porsche-991-1-gt3rs","title":"Front Splitter Kit - Porsche 991.1 GT3RS","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eFront splitters produce front-end downforce without significantly increasing drag, by creating a large pressure delta between their top and bottom surfaces. This RS kit goes further than the standard GT3 splitter, adding carbon splitter diffusers and grind strakes to work the underbody harder.\u003c\/p\u003e\n\u003cp\u003eThe splitter is produced from carbon polyweave, the same material used in top-tier motorsport. It isn't brittle, so no cracking like carbon fiber or ABS, and it won't grab and bend under the car like aluminum.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Polyweave Splitter (1)\u003c\/li\u003e\n\u003cli\u003ePolyweave Grind Strake (4)\u003c\/li\u003e\n\u003cli\u003eCarbon Splitter Diffuser (2)\u003c\/li\u003e\n\u003cli\u003eSheet Aluminum Diffuser Block Off (2)\u003c\/li\u003e\n\u003cli\u003eSheet Metal Bracket Kit (13 pieces)\u003c\/li\u003e\n\u003cli\u003eSteel Cross Beam Tube (1)\u003c\/li\u003e\n\u003cli\u003eClevis (4)\u003c\/li\u003e\n\u003cli\u003eSplitter Support Rod Assembly (2)\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGreatly increases front-end downforce\u003c\/li\u003e\n\u003cli\u003eProduces high downforce suitable for large rear wings\u003c\/li\u003e\n\u003cli\u003eCapable of handling 300+ lbs\u003c\/li\u003e\n\u003cli\u003eCarbon polyweave construction — strength, low weight, durability and appearance\u003c\/li\u003e\n\u003cli\u003eSame material used in Indy Car, NASCAR and F1\u003c\/li\u003e\n\u003cli\u003eIntegrated splitter diffusers and grind strakes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon polyweave front splitter\u003c\/li\u003e\n\u003cli\u003eWill not grab and bend surfaces like aluminum units\u003c\/li\u003e\n\u003cli\u003eWill not crack and break like carbon and ABS units\u003c\/li\u003e\n\u003cli\u003eAbrasion resistant while remaining stiff\u003c\/li\u003e\n\u003cli\u003eCNC cut and bent brackets\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eSized to counteract the rear wing and diffuser for a safe, effective aero balance — an unbalanced car is considerably harder to drive at the limit. Designed to pair with the V1X Swan Neck Rear Wing on the RS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0243A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 991.1 GT3 RS only — not the 991.2 RS, and not the standard GT3.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556843319594,"sku":"A0243A","price":4999.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0243A_5D_20Front_20Splitter_20Kit_20-_20Porsche_20991.jpg?v=1789010718"},{"product_id":"front-splitter-kit-porsche-991-2-gt3rs","title":"Front Splitter Kit - Porsche 991.2 GT3RS","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eFront splitters produce front-end downforce without significantly increasing drag, by creating a large pressure delta between their top and bottom surfaces. This RS kit adds carbon splitter diffusers and grind strakes to work the underbody harder than the standard GT3 splitter.\u003c\/p\u003e\n\u003cp\u003eThe splitter is produced from carbon polyweave, the same material used in top-tier motorsport. It isn't brittle, so no cracking like carbon fiber or ABS, and it won't grab and bend under the car like aluminum.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Polyweave Splitter (1)\u003c\/li\u003e\n\u003cli\u003ePolyweave Grind Strake (4)\u003c\/li\u003e\n\u003cli\u003eCarbon Splitter Diffuser (2)\u003c\/li\u003e\n\u003cli\u003eSheet Aluminum Diffuser Block Off (2)\u003c\/li\u003e\n\u003cli\u003eSheet Metal Bracket Kit (13 pieces)\u003c\/li\u003e\n\u003cli\u003eSteel Cross Beam Tube (1)\u003c\/li\u003e\n\u003cli\u003eClevis (4)\u003c\/li\u003e\n\u003cli\u003eSplitter Support Rod Assembly (2)\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGreatly increases front-end downforce\u003c\/li\u003e\n\u003cli\u003eProduces high downforce suitable for large rear wings\u003c\/li\u003e\n\u003cli\u003eCapable of handling 300+ lbs\u003c\/li\u003e\n\u003cli\u003eCarbon polyweave construction — strength, low weight, durability and appearance\u003c\/li\u003e\n\u003cli\u003eSame material used in Indy Car, NASCAR and F1\u003c\/li\u003e\n\u003cli\u003eIntegrated splitter diffusers and grind strakes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon polyweave front splitter\u003c\/li\u003e\n\u003cli\u003eWill not grab and bend surfaces like aluminum units\u003c\/li\u003e\n\u003cli\u003eWill not crack and break like carbon and ABS units\u003c\/li\u003e\n\u003cli\u003eAbrasion resistant while remaining stiff\u003c\/li\u003e\n\u003cli\u003eCNC cut and bent brackets\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eSized to counteract the rear wing and diffuser for a safe, effective aero balance — an unbalanced car is considerably harder to drive at the limit. Designed to pair with the V1X Swan Neck Rear Wing on the RS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0219A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Porsche 991.2 GT3 RS only — not the 991.1 RS, and not the standard GT3.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556845187370,"sku":"A0219A","price":4999.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0219A_5D_20Front_20Splitter_20Kit_20-_20Porsche_20991.jpg?v=1789010734"},{"product_id":"front-splitter-kit-porsche-992-gt3","title":"Front Splitter Kit - Porsche 992 GT3","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eFront splitters produce front-end downforce without significantly increasing drag, by creating a large pressure delta between their top and bottom surfaces. This one adds design tweaks to the splitter's underside to improve flow with the carbon polyweave blades, with CFD used to confirm an appropriate aero balance for on-track performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe splitter installs with absolutely no cutting or permanent modification to the car.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt's produced from carbon thermoplastic, the same material used in top-tier motorsport. It isn't brittle, so no cracking like carbon fiber or ABS, and it won't grab and bend under the car like aluminum. The polyweave abrades away and takes a considerable beating.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Front Splitter Blade, left-hand and right-hand\u003c\/li\u003e\n\u003cli\u003e(1) Bracket Kit\u003c\/li\u003e\n\u003cli\u003e(2) Chassis Mount\u003c\/li\u003e\n\u003cli\u003e(1) Leading Edge Mount\u003c\/li\u003e\n\u003cli\u003e(1) Tube Kit\u003c\/li\u003e\n\u003cli\u003e(1) Cross Beam\u003c\/li\u003e\n\u003cli\u003e(2) Outer Support Beam\u003c\/li\u003e\n\u003cli\u003e(1) Hardware Kit, including all necessary hardware for a seamless install — stainless for the vast majority\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGreatly increases front-end downforce\u003c\/li\u003e\n\u003cli\u003eProduces high downforce suitable for large rear wings\u003c\/li\u003e\n\u003cli\u003eNo cutting or permanent modification required\u003c\/li\u003e\n\u003cli\u003eCarbon thermoplastic construction — strength, low weight, durability and appearance\u003c\/li\u003e\n\u003cli\u003eSame material used in Indy Car, NASCAR and F1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon polyweave front splitter\u003c\/li\u003e\n\u003cli\u003eWill not grab and bend surfaces like aluminum units\u003c\/li\u003e\n\u003cli\u003eWill not crack and break like carbon and ABS units\u003c\/li\u003e\n\u003cli\u003eAbrasion resistant while remaining stiff\u003c\/li\u003e\n\u003cli\u003eCNC cut and bent brackets\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Engineering\u003c\/h3\u003e\n\u003cp\u003eSized against the rear wing and diffuser for a safe, effective aero balance — an unbalanced car is considerably harder to drive at the limit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0426A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556855771434,"sku":"A0426A","price":3899.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0426A_5D_20Front_20Splitter_20Kit_20-_20Porsche_20992_20GT3.jpg?v=1789010860"},{"product_id":"front-splitter-kit-g87-bmw-m2","title":"Front Splitter Kit - G87 BMW M2","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eFront splitters produce front-end downforce without significantly increasing drag, by creating a large pressure delta between their top and bottom surfaces. Using scan data taken directly from the car alongside CFD, this splitter was developed to pair with the UCW or V1X rear wings and comfortably handles the loads involved.\u003c\/p\u003e\n\u003cp\u003eSplitter tunnels — or splitter diffusers — were added to increase front-end downforce beyond what a flat blade alone can produce. The splitter mounts at multiple chassis locations for a strong, durable install, with all hardware locations recessed for improved aerodynamic performance.\u003c\/p\u003e\n\u003cp\u003eThe kit also includes oil cooler ducting: an exit duct and block-off plate to manage flow through that area.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo-Piece Carbon Polyweave Splitter Blade\u003c\/li\u003e\n\u003cli\u003eThree-Piece Aluminum Front Air Dam\u003c\/li\u003e\n\u003cli\u003e(6) Sheet Steel Chassis Bracket\u003c\/li\u003e\n\u003cli\u003e(2) Steel Chassis Bracket\u003c\/li\u003e\n\u003cli\u003e(2) Splitter Diffuser Tunnel\u003c\/li\u003e\n\u003cli\u003e(1) Oil Cooler Exit Duct\u003c\/li\u003e\n\u003cli\u003e(1) Oil Cooler Block Off Plate\u003c\/li\u003e\n\u003cli\u003eRubber edge seal for the air dam\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all necessary hardware for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGreatly increases front-end downforce\u003c\/li\u003e\n\u003cli\u003eSplitter diffuser tunnels for downforce beyond a flat blade\u003c\/li\u003e\n\u003cli\u003eIntegrated oil cooler ducting\u003c\/li\u003e\n\u003cli\u003eRecessed hardware locations for improved aerodynamic performance\u003c\/li\u003e\n\u003cli\u003eCarbon polyweave construction — the same material used in Indy Car, NASCAR and F1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon polyweave splitter blade\u003c\/li\u003e\n\u003cli\u003eWill not grab and bend surfaces like aluminum units\u003c\/li\u003e\n\u003cli\u003eWill not crack and break like carbon and ABS units\u003c\/li\u003e\n\u003cli\u003eAluminum air dam with rubber edge seal\u003c\/li\u003e\n\u003cli\u003eCNC cut and bent steel brackets\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0536A\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556868157738,"sku":"A0536A","price":2899.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0536A_5D_20Front_20Splitter_20Kit_20-_20G87_20BMW_20M2.jpg?v=1789011089"},{"product_id":"front-splitter-kit-g80-bmw-m3-g82-bmw-m4","title":"Front Splitter Kit - G80 BMW M3, G82 BMW M4","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe G80 M3 and G82 M4 handle well and carry a strong turbocharged inline-six, but BMW left room for aerodynamic improvement. A front splitter helps balance larger rear aerodynamic systems and adds real front-end grip.\u003c\/p\u003e\n\u003cp\u003eFront splitters produce downforce by creating a large pressure delta between their top and bottom surfaces. This kit adds carbon nylon diffuser sections underneath to work the airflow harder than a flat blade alone, and mounts through a steel structural support tube and bracket set for a rigid install.\u003c\/p\u003e\n\u003cp\u003eThe blades are carbon polyweave, the same material used in top-tier motorsport — not brittle like carbon fiber or ABS, and it won't grab and bend under the car like aluminum.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Carbon Polyweave Splitter Blade, right-hand side\u003c\/li\u003e\n\u003cli\u003e(1) Carbon Polyweave Splitter Blade, left-hand side\u003c\/li\u003e\n\u003cli\u003e(1) Sheet Aluminum Air Dam (2 pieces)\u003c\/li\u003e\n\u003cli\u003e(1) Long Steel Structural Support Tube\u003c\/li\u003e\n\u003cli\u003e(4) Steel Splitter Mounting Bracket\u003c\/li\u003e\n\u003cli\u003e(2) Carbon Nylon Diffuser Add-On\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all necessary hardware for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGreatly increases front-end downforce\u003c\/li\u003e\n\u003cli\u003eProduces high downforce suitable for large rear wings\u003c\/li\u003e\n\u003cli\u003eCarbon nylon diffuser sections for downforce beyond a flat blade\u003c\/li\u003e\n\u003cli\u003eCarbon polyweave construction — the same material used in Indy Car, NASCAR and F1\u003c\/li\u003e\n\u003cli\u003eSteel structural support tube for a rigid mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon polyweave splitter blades\u003c\/li\u003e\n\u003cli\u003eWill not grab and bend surfaces like aluminum units\u003c\/li\u003e\n\u003cli\u003eWill not crack and break like carbon and ABS units\u003c\/li\u003e\n\u003cli\u003eSheet aluminum air dam\u003c\/li\u003e\n\u003cli\u003eCNC cut and bent steel brackets\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0654A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits BMW G80 M3 and G82 M4.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556884214058,"sku":"A0654A","price":2999.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0654A_5D_20Front_20Splitter_20Kit_20-_20G80_20BMW_20M3_2C_20G82_20BMW_20M4.jpg?v=1789011294"},{"product_id":"front-splitter-subaru-vb-wrx","title":"Front Splitter - Subaru VB WRX","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Verus Engineering Front Splitter increases front-end downforce and reduces drag in a simple bolt-on package. It's made from a hard, durable, stiff plastic that doesn't bend under the car the way aluminum does, and resists cracking when struck from below.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D to estimate performance and confirm the splitter balances the car across the various Ventus packages. In-house scan data gives a near-OEM fit and finish.\u003c\/p\u003e\n\u003cp\u003eThe two-piece blade design reduces shipping cost and makes replacement easier if one half is damaged.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront Splitter Blade Half (2)\u003c\/li\u003e\n\u003cli\u003eSupport Rod (2)\u003c\/li\u003e\n\u003cli\u003eSupport Plate (1)\u003c\/li\u003e\n\u003cli\u003eClevis (4)\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces lift \/ increases downforce\u003c\/li\u003e\n\u003cli\u003eImproved overall aerodynamic efficiency\u003c\/li\u003e\n\u003cli\u003eReduces lap times\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on installation\u003c\/li\u003e\n\u003cli\u003eWill not pull under the vehicle like aluminum units\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD tested design\u003c\/li\u003e\n\u003cli\u003eHard, durable plastic composition\u003c\/li\u003e\n\u003cli\u003eChassis-mounted splitter support rods\u003c\/li\u003e\n\u003cli\u003eStainless hardware used throughout\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0484A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits 2022+ Subaru WRX (VB).\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556908822826,"sku":"A0484A","price":499.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0484A_5D_20Front_20Splitter_20-_20Subaru_20VB_20WRX.jpg?v=1789011657"},{"product_id":"splitter-air-dam-subaru-vb-wrx","title":"Splitter Air Dam - Subaru VB WRX","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Splitter Air Dam is a simple bolt-on addition that improves front splitter performance and makes any front splitter a more complete system.\u003c\/p\u003e\n\u003cp\u003eIt stops high-pressure air finding its way between the splitter and the bumper, which increases the pressure differential across the splitter and improves its performance. Better-controlled airflow around the front bumper also improves how other components — dive planes in particular — work.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Air Dam, left-hand and right-hand\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eImproves front splitter performance\u003c\/li\u003e\n\u003cli\u003eIncreases the pressure differential across the splitter\u003c\/li\u003e\n\u003cli\u003eImproves airflow around the front bumper, benefiting dive planes\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD developed design\u003c\/li\u003e\n\u003cli\u003eDurable construction\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0506A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits 2022+ Subaru WRX (VB). Designed to complement the Verus front splitter (A0484A).\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556919865642,"sku":"A0506A","price":144.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0506A_5D_20Splitter_20Air_20Dam_20-_20Subaru_20VB_20WRX.jpg?v=1789011874"},{"product_id":"street-front-splitter-wrx-sti-va","title":"Street Front Splitter - WRX\/STI (VA)","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Street Front Splitter increases front-end downforce and reduces drag in a simple bolt-on package. It's made from a hard, durable, stiff plastic that doesn't bend under the car the way aluminum does, and resists cracking when struck from below.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D to estimate performance and confirm the splitter balances the car. In-house scan data gives a near-OEM fit and finish.\u003c\/p\u003e\n\u003cp\u003eBuilt for owners looking to combat front-end lift and increase traction at speed.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront Splitter Blade\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all necessary components for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces lift \/ increases downforce\u003c\/li\u003e\n\u003cli\u003eImproved overall aerodynamic efficiency\u003c\/li\u003e\n\u003cli\u003eReduces lap times\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on installation\u003c\/li\u003e\n\u003cli\u003eWill not pull under the vehicle like aluminum units\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD tested design\u003c\/li\u003e\n\u003cli\u003eHard, durable plastic composition\u003c\/li\u003e\n\u003cli\u003eStainless hardware used throughout\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0027A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits 2015+ Subaru WRX and STI (VA). For a version that ships in two pieces and adds splitter tie supports, see the Two-Piece Front Splitter (A0076A).\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556924158250,"sku":"A0027A","price":399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0027A_5D_20Street_20Front_20Splitter_20-_20WRX-STI_20_28VA_29.jpg?v=1789011976"},{"product_id":"two-piece-front-splitter-wrx-sti-va","title":"Two-Piece Front Splitter - WRX\/STI (VA)","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Two-Piece Front Splitter increases front-end downforce and works alongside the Verus rear diffuser to reduce lap times. The two-piece design lowers shipping cost and makes replacement easier — a single damaged half can be replaced rather than the whole blade.\u003c\/p\u003e\n\u003cp\u003eIt includes splitter tie assemblies and a support bracket for rigidity, so the blade holds its shape under load at speed.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D, and in-house scan data gives a near-OEM fit and finish.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo-Piece Front Splitter (2)\u003c\/li\u003e\n\u003cli\u003eSplitter Tie Assembly (2)\u003c\/li\u003e\n\u003cli\u003eSplitter Tie Clevis (4)\u003c\/li\u003e\n\u003cli\u003eSplitter Support Bracket\u003c\/li\u003e\n\u003cli\u003eSplitter Two-Piece Bracket\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces lift \/ increases downforce\u003c\/li\u003e\n\u003cli\u003eImproved overall aerodynamic efficiency\u003c\/li\u003e\n\u003cli\u003eReduces lap times\u003c\/li\u003e\n\u003cli\u003eSplitter ties for rigidity under load\u003c\/li\u003e\n\u003cli\u003eTwo-piece design reduces shipping cost and simplifies replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD tested design\u003c\/li\u003e\n\u003cli\u003eHard, durable plastic composition\u003c\/li\u003e\n\u003cli\u003eStainless hardware used throughout\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0076A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits 2015+ Subaru WRX and STI (VA).\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556924485930,"sku":"A0076A","price":449.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0076A_5D_20Two-Piece_20Front_20Splitter_20-_20WRX-STI_20_28VA_29.jpg?v=1789011990"},{"product_id":"front-splitter-support-system-wrx-sti-va","title":"Front Splitter Support System - WRX\/STI (VA)","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Front Splitter Support System significantly increases the load the front splitter can carry. By tying the leading edge of the splitter to the OEM crash bar, the splitter can comfortably handle \u003cstrong\u003eover 200 lbs of downforce\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVerus recommends this kit for any car intended for use above 100 MPH.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSplitter Tie Assembly (2)\u003c\/li\u003e\n\u003cli\u003eSplitter Tie Clevis (4)\u003c\/li\u003e\n\u003cli\u003eSplitter Support Bracket\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncreases splitter load capacity to over 200 lbs\u003c\/li\u003e\n\u003cli\u003eTies the splitter leading edge to the OEM crash bar\u003c\/li\u003e\n\u003cli\u003eRecommended for high-speed and track use\u003c\/li\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMachined clevises and tie assemblies\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0057A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits 2015+ Subaru WRX and STI (VA). An upgrade for the Street Front Splitter (A0027A) — the Two-Piece Splitter (A0076A) already includes splitter ties.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556937265450,"sku":"A0057A","price":159.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0057A_5D_20Front_20Splitter_20Support_20System_20-_20WRX-STI_20_28VA_29.jpg?v=1789012371"},{"product_id":"splitter-air-dam-subaru-wrx-sti-va","title":"Splitter Air Dam - Subaru WRX\/STI (VA)","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Splitter Air Dam is a simple bolt-on addition that improves front splitter performance and makes any front splitter a more complete system.\u003c\/p\u003e\n\u003cp\u003eIt stops high-pressure air finding its way between the splitter and the bumper, which increases the pressure differential across the splitter and improves its performance. Better-controlled airflow around the front bumper also improves how other components — dive planes in particular — work.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Air Dam, left-hand and right-hand\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eImproves front splitter performance\u003c\/li\u003e\n\u003cli\u003eIncreases the pressure differential across the splitter\u003c\/li\u003e\n\u003cli\u003eImproves airflow around the front bumper, benefiting dive planes\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD developed design\u003c\/li\u003e\n\u003cli\u003eDurable construction\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0393A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits 2015+ Subaru WRX and STI (VA). Designed to complement the Verus front splitters.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556937298218,"sku":"A0393A","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0393A_5D_20Splitter_20Air_20Dam_20-_20Subaru_20WRX-STI_20_28VA_29.jpg?v=1789012385"},{"product_id":"lip-kit-hardware-for-splitter-va-wrx-sti","title":"Lip Kit Hardware for Splitter - VA WRX\/STI","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eRunning the Verus front splitter alongside an OEM-style lip? This hardware kit is what makes that combination work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote from Verus:\u003c\/strong\u003e if you're also running the Front Splitter Support System (A0057A), they suggest adding two to four 25mm support rod extensions for complete compatibility.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllows the Verus front splitter to be fitted with an OEM-style lip\u003c\/li\u003e\n\u003cli\u003eDirect replacement hardware, no fabrication needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes spacer — 1\/4-28 rod end, 25mm long\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0027A-LIP\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits 2015+ Subaru WRX and STI (VA). This is hardware only — the splitter itself is sold separately.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556937888042,"sku":"A0027A-LIP","price":44.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0027A-LIP_5D_20Lip_20Kit_20Hardware_20for_20Splitter_20-_20VA_20WRX-STI.jpg?v=1789012425"},{"product_id":"front-splitter-kit-subaru-wrx-sti-gr-gv-2011-2014","title":"Front Splitter Kit - Subaru WRX\/STI (GR\/GV) 2011-2014","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Verus Engineering Front Splitter increases front-end downforce, works well alongside the Verus rear diffuser and rear wing, and reduces lap times on track.\u003c\/p\u003e\n\u003cp\u003eFitted with the optional air dam, or run in conjunction with the factory STI lip, it makes for a well-rounded and fully considered front-end setup for the track-day enthusiast.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D, and in-house scan data gives a near-OEM fit and finish.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Splitter Blade\u003c\/li\u003e\n\u003cli\u003e(2) Center Mounting Brackets\u003c\/li\u003e\n\u003cli\u003e(2) Outer Mounting Brackets\u003c\/li\u003e\n\u003cli\u003e(1) Hardware Kit, including all hardware necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces lift \/ increases downforce\u003c\/li\u003e\n\u003cli\u003eImproved overall aerodynamic efficiency\u003c\/li\u003e\n\u003cli\u003eReduces lap times\u003c\/li\u003e\n\u003cli\u003eWorks with the factory STI lip or the Verus air dam\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD tested design\u003c\/li\u003e\n\u003cli\u003eHard, durable plastic composition\u003c\/li\u003e\n\u003cli\u003eStainless hardware used throughout\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0206A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits 2011–2014 Subaru WRX and STI (GR\/GV).\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556938641706,"sku":"A0206A","price":429.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0206A_5D_20Front_20Splitter_20Kit_20-_20Subaru_20WRX-STI_20_28GR-GV_29_20_282011-2014_29.jpg?v=1789012554"},{"product_id":"splitter-air-dam-subaru-wrx-sti-gr-gv-2011-2014","title":"Splitter Air Dam - Subaru WRX\/STI (GR\/GV) 2011-2014","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Splitter Air Dam is a simple bolt-on addition that improves front splitter performance and makes any front splitter a more complete system.\u003c\/p\u003e\n\u003cp\u003eIt stops high-pressure air finding its way between the splitter and the bumper, which increases the pressure differential across the splitter and improves its performance. Better-controlled airflow around the front bumper also improves how other components — dive planes in particular — work.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAir Dam, left-hand\u003c\/li\u003e\n\u003cli\u003eAir Dam, right-hand\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eImproves front splitter performance\u003c\/li\u003e\n\u003cli\u003eIncreases the pressure differential across the splitter\u003c\/li\u003e\n\u003cli\u003eImproves airflow around the front bumper, benefiting dive planes\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD developed design\u003c\/li\u003e\n\u003cli\u003eDurable construction\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0386A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits 2011–2014 Subaru WRX and STI (GR\/GV). Designed to complement the Verus front splitter (A0206A).\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556940149034,"sku":"A0386A","price":144.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0386A_5D_20Splitter_20Air_20Dam_20-_20Subaru_20WRX-STI_20_28GR-GV_29_20_282011-2014_29.jpg?v=1789012672"},{"product_id":"front-splitter-kit-fk8-honda-civic-type-r","title":"Front Splitter Kit - FK8 Honda Civic Type R","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Verus Engineering Front Splitter significantly improves front-end downforce while following the OE bumper lines. The kit was designed to handle the loads it creates while keeping installation as straightforward as possible.\u003c\/p\u003e\n\u003cp\u003eThe splitter is made from durable, lightweight plastic and mounts to chassis hardpoints through two splitter ties and several bumper mounts, so the load goes into the structure rather than the bumper skin.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSplitter Blade\u003c\/li\u003e\n\u003cli\u003eSplitter Tie Assembly (2)\u003c\/li\u003e\n\u003cli\u003eSplitter Clevis (4)\u003c\/li\u003e\n\u003cli\u003eSplitter Extensions (4)\u003c\/li\u003e\n\u003cli\u003eSplitter Support Bracket\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all necessary components for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSignificantly increases front-end downforce\u003c\/li\u003e\n\u003cli\u003eFollows the OE bumper lines\u003c\/li\u003e\n\u003cli\u003eMounts to chassis hardpoints via splitter ties\u003c\/li\u003e\n\u003cli\u003eDurable, lightweight plastic construction\u003c\/li\u003e\n\u003cli\u003eStraightforward bolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD tested design\u003c\/li\u003e\n\u003cli\u003eHard, durable plastic composition\u003c\/li\u003e\n\u003cli\u003eStainless hardware used throughout\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0193A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits 2017–2021 Honda Civic Type R (FK8).\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556940968234,"sku":"A0193A","price":549.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0193A_5D_20Front_20Splitter_20Kit_20-_20Fk8_20Honda_20Civic_20Type_20R.jpg?v=1789012716"},{"product_id":"front-splitter-and-air-dam-kit-toyota-gr-corolla","title":"Front Splitter and Air Dam Kit - Toyota GR Corolla","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Verus Engineering Front Splitter increases front-end downforce in a simple bolt-on package. It's made from a hard, durable, stiff plastic that doesn't bend under the car the way aluminum does, and resists cracking when struck from below.\u003c\/p\u003e\n\u003cp\u003eState-of-the-art analysis software was used during R\u0026amp;D to estimate performance and confirm the splitter balances the car. In-house scan data gives a near-OEM fit and finish.\u003c\/p\u003e\n\u003cp\u003eSplitter support rods tie the blade into the chassis so it holds its shape under load at speed.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Front Splitter Blade\u003c\/li\u003e\n\u003cli\u003e(2) Splitter Support Rod\u003c\/li\u003e\n\u003cli\u003e(4) Splitter Support Clevis\u003c\/li\u003e\n\u003cli\u003e(1) Splitter Support Brace\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces lift \/ increases downforce\u003c\/li\u003e\n\u003cli\u003eImproved overall aerodynamic efficiency\u003c\/li\u003e\n\u003cli\u003eReduces lap times\u003c\/li\u003e\n\u003cli\u003eChassis-mounted support rods for rigidity under load\u003c\/li\u003e\n\u003cli\u003eWill not pull under the vehicle like aluminum units\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCFD tested design\u003c\/li\u003e\n\u003cli\u003eHard, durable plastic composition\u003c\/li\u003e\n\u003cli\u003eStainless hardware used throughout\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0517A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Toyota GR Corolla.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556964757802,"sku":"A0517A","price":699.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0517A_5D_20Front_20Splitter_20and_20Air_20Dam_20Kit_20-_20Toyota_20GR_20Corolla.jpg?v=1789013072"},{"product_id":"czf-front-splitter-diffuser-tunnel-kit","title":"CZF Front Splitter Diffuser Tunnel Kit","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe CZF Front Splitter Diffuser Tunnels were developed for one purpose: making large amounts of efficient front-end downforce.\u003c\/p\u003e\n\u003cp\u003eThey're produced from 2x2 pre-preg carbon fiber with a matte clear coat. A large flange makes them straightforward to bolt to a splitter of your choice, and the curved trailing edge improves tire-to-diffuser clearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThese are universal.\u003c\/strong\u003e Unlike the chassis-specific splitter kits that include integrated tunnels, these bolt to whatever splitter you're already running — useful for a custom build or a splitter from another manufacturer.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLeft Carbon Front Diffuser\u003c\/li\u003e\n\u003cli\u003eRight Carbon Front Diffuser\u003c\/li\u003e\n\u003cli\u003eHardware Kit, including all hardware necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGenerates large amounts of efficient front-end downforce\u003c\/li\u003e\n\u003cli\u003eLarge mounting flange for bolting to a splitter of your choice\u003c\/li\u003e\n\u003cli\u003eCurved trailing edge for better tire clearance\u003c\/li\u003e\n\u003cli\u003eCarbon fiber construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2x2 pre-preg carbon fiber\u003c\/li\u003e\n\u003cli\u003eMatte clear coat finish\u003c\/li\u003e\n\u003cli\u003eStainless hardware throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e A0373A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUniversal fit — requires an existing front splitter to mount to. Fitment and positioning are the installer's responsibility.\u003c\/em\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52556995133738,"sku":"A0373A","price":749.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/5BA0373A_5D_20CZF_20Front_20Splitter_20Diffuser_20Tunnel_20Kit.jpg?v=1789013707"},{"product_id":"evs-tuning-carbon-fiber-front-splitter-honda-civic-type-r-fl5","title":"EVS Tuning Carbon Fiber Front Splitter - Honda Civic Type R (FL5)","description":"\u003ch3\u003eEVS Tuning Carbon Fiber Front Splitter — Honda Civic Type R (FL5)\u003c\/h3\u003e\u003cp\u003eFront splitter that extends forward from the bumper's lower edge, creating a high-pressure zone above and low pressure beneath to generate front downforce at speed.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGenuine carbon fiber with UV-stable clear coat\u003c\/li\u003e\n\u003cli\u003eBolt-on fitment to the OEM front bumper\u003c\/li\u003e\n\u003cli\u003ePairs with the EVS front canard and front lip\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFits Honda Civic Type R FL5, 2023 and newer.\u003c\/em\u003e\u003c\/p\u003e","brand":"EVS Tuning","offers":[{"title":"Default Title","offer_id":52663978066218,"sku":"EVS-FL5-FS-CFC","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/EVS-FL5-FL-CFRP_2fd21fee-25f9-42bc-b385-f88d449c6c35.jpg?v=1789747841"},{"product_id":"evs-tuning-carbon-front-lip-splitter-v2-honda-civic-type-r-fk8","title":"EVS Tuning Carbon Front Lip Splitter V2 - Honda Civic Type R (FK8)","description":"\u003ch3\u003eEVS Tuning Carbon Front Lip Splitter V2 — Honda Civic Type R (FK8)\u003c\/h3\u003e\u003cp\u003eRevised carbon splitter that mounts to the leading edge of the FK8's front lip, extending the aero surface forward for additional front downforce.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGenuine carbon fiber with UV-stable clear coat\u003c\/li\u003e\n\u003cli\u003eDesigned to pair with the EVS front lip spoiler\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFits Honda Civic Type R FK8, 2017 to 2021.\u003c\/em\u003e\u003c\/p\u003e","brand":"EVS Tuning","offers":[{"title":"Default Title","offer_id":52663981539626,"sku":"EVS-FK8-FLS","price":660.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/b2_0890b21b-ce6a-4918-abc4-c31ac86734c0.jpg?v=1789747842"},{"product_id":"evs-tuning-carbon-front-splitter-toyota-gr-supra-a90","title":"EVS Tuning Carbon Front Splitter - Toyota GR Supra (A90)","description":"\u003ch3\u003eEVS Tuning Carbon Front Splitter — Toyota GR Supra (A90)\u003c\/h3\u003e\u003cp\u003eFront splitter extending forward from the bumper's lower edge to generate downforce at the front axle.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGenuine carbon fiber with UV-stable clear coat\u003c\/li\u003e\n\u003cli\u003eBolt-on fitment to the OEM front bumper\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFits Toyota GR Supra A90, 2019 and newer.\u003c\/em\u003e\u003c\/p\u003e","brand":"EVS Tuning","offers":[{"title":"Default Title","offer_id":52663983833386,"sku":"EVS-A90-FLS","price":880.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/c3.jpg?v=1789740969"}],"url":"https:\/\/team-anbd.com\/collections\/front-splitters.oembed?page=2","provider":"Team ANBD","version":"1.0","type":"link"}