{"title":"Dodge Performance Parts","description":"\u003cp\u003ePerformance parts for the Dodge Viper and the LX Charger and Challenger, including the Hellcat.\u003c\/p\u003e\u003cp\u003eGiroDisc and DBA rotors, Hawk and EBC pads, KW coilovers for the Viper, and Moroso coolant expansion tanks for the LX cars.\u003c\/p\u003e\u003cp\u003eViper brake and suspension parts differ between generations, so check the fitment line on each product before you order. Installation available at our shop in Andover, NJ.\u003c\/p\u003e","products":[{"product_id":"moroso-14-19-dodge-charger-challenger-srt8-coolant-expansion-tank-direct-bolt-in-replacement","title":"Moroso 14-19 Dodge Charger\/Challenger SRT8 Coolant Expansion Tank - Direct Bolt-In Replacement","description":"\u003cp\u003eMoroso coolant expansion tank for the 14-19 Dodge Charger\/Challenger SRT8. A fabricated aluminum tank replaces the factory plastic reservoir that goes brittle and splits with age and heat. Aluminum handles underhood temperature and pressure that plastic does not, and it is the part you stop worrying about on a track weekend.\u003c\/p\u003e\u003ch3\u003eDetails\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e 14-19 Dodge Charger\/Challenger SRT8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Direct bolt-in replacement — uses the factory mounting points and hose connections\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 63812\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWorth knowing\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePlastic expansion tanks are a common failure point on hot-running and tuned cars; replacing one before it lets go is cheaper than the tow.\u003c\/li\u003e\n\u003cli\u003eRefill and bleed the cooling system properly after fitting, and check the cap seals against the new tank.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions or installation\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and we install what we sell. \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e if you need help choosing the right part, or \u003ca href=\"\/pages\/appointment\"\u003ebook an appointment\u003c\/a\u003e for installation.\u003c\/p\u003e","brand":"Moroso","offers":[{"title":"Default Title","offer_id":52787090391338,"sku":"mor63812","price":518.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/d9ddeb9a4a2c93330ec0f9a53d86e822.jpg?v=1790609729"},{"product_id":"moroso-05-10-dodge-charger-coolant-expansion-tank-w-two-brackets","title":"Moroso 05-10 Dodge Charger Coolant Expansion Tank w\/Two Brackets","description":"\u003cp\u003eMoroso coolant expansion tank for the 05-10 Dodge Charger. A fabricated aluminum tank replaces the factory plastic reservoir that goes brittle and splits with age and heat. Aluminum handles underhood temperature and pressure that plastic does not, and it is the part you stop worrying about on a track weekend.\u003c\/p\u003e\u003ch3\u003eDetails\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e 05-10 Dodge Charger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 63497\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWorth knowing\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePlastic expansion tanks are a common failure point on hot-running and tuned cars; replacing one before it lets go is cheaper than the tow.\u003c\/li\u003e\n\u003cli\u003eRefill and bleed the cooling system properly after fitting, and check the cap seals against the new tank.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions or installation\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and we install what we sell. \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e if you need help choosing the right part, or \u003ca href=\"\/pages\/appointment\"\u003ebook an appointment\u003c\/a\u003e for installation.\u003c\/p\u003e","brand":"Moroso","offers":[{"title":"Default Title","offer_id":52787095241002,"sku":"mor63497","price":522.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/b7ec58e37cae0548c622c3e921d86fd8.jpg?v=1790609774"},{"product_id":"girodisc-15-20-dodge-hellcat-slotted-front-rings-front-rings-only-reuses-oem-hats","title":"GiroDisc 15-20 Dodge Hellcat Slotted Front Rings (Front Rings Only Reuses OEM Hats)","description":"\u003cp\u003eGiroDisc replacement cast iron rotor rings for the 15-20 Dodge Hellcat (Front Rings Only Reuses OEM Hats), front axle. When the iron is worn or heat-checked, you replace the rings and keep the hats — the reason a two-piece rotor is cheaper to own over time.\u003c\/p\u003e\u003ch3\u003eAbout replacement rings\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRings only — this set mounts to the \u003cstrong\u003efactory hats\u003c\/strong\u003e, so no GiroDisc hats are needed.\u003c\/li\u003e\n\u003cli\u003eNew installation hardware (cap screws, hardened washers and anti-noise spring washers) is supplied. GiroDisc does not recommend reusing old hardware.\u003c\/li\u003e\n\u003cli\u003eSlotted friction surface with curved internal cooling vanes, same specification as the original assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Challenger \/ Charger Hellcat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e D1-244\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant fitment notes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eThese rings mount to the factory hats; no GiroDisc aluminum hats are required.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePriced and sold as a pair — one axle set of rings, plus new mounting hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787507790122,"sku":"girD1-244","price":840.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/rings__18342.1689725205.jpg?v=1790620125"},{"product_id":"girodisc-2003-dodge-viper-slotted-front-rotors","title":"GiroDisc 2003 Dodge Viper Slotted Front Rotors","description":"\u003cp\u003eGiroDisc two-piece slotted front rotors for the 2003 Dodge Viper. These replace the factory one-piece front rotors with a lighter, rebuildable floating assembly built for repeated track use.\u003c\/p\u003e\u003ch3\u003eWhy a GiroDisc two-piece rotor\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloating two-piece design.\u003c\/strong\u003e A cast iron disc ring is mounted to a central hat with high-strength alloy steel drive pins, so the ring can expand axially and radially with heat instead of fighting the hat. Anti-noise spring washers keep the float silent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6061-T6 aluminum hat.\u003c\/strong\u003e The hat is machined from U.S.-sourced 6061-T6 aircraft-specification aluminum, cutting rotating and unsprung weight against the one-piece factory casting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved internal vanes\u003c\/strong\u003e act as a centrifugal pump, forcing cooling air through the disc on track.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted, not cross-drilled.\u003c\/strong\u003e Slots sweep the pad face clean without the stress risers that make drilled rotors crack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRebuildable.\u003c\/strong\u003e When the iron is worn out you replace the rings only and keep the hats and hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Viper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e A1-006\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePriced and sold as a pair — one complete front axle set.\u003c\/li\u003e\n\u003cli\u003eTwo-piece rotor assemblies with aluminum hats, iron rings and all mounting hardware, assembled and ready to bolt on.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787513524522,"sku":"girA1-006","price":1150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/408mm72v__76228.1677861458.jpg?v=1790619768"},{"product_id":"girodisc-2016-dodge-viper-acr-gen-5-w-ccm-slotted-front-rotors","title":"GiroDisc 2016+ Dodge Viper ACR Gen 5 (w\/CCM) Slotted Front Rotors","description":"\u003cp\u003eGiroDisc two-piece slotted front rotors for the 2016+ Dodge Viper ACR Gen 5 (w\/CCM). These replace the factory one-piece front rotors with a lighter, rebuildable floating assembly built for repeated track use.\u003c\/p\u003e\u003ch3\u003eWhy a GiroDisc two-piece rotor\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloating two-piece design.\u003c\/strong\u003e A cast iron disc ring is mounted to a central hat with high-strength alloy steel drive pins, so the ring can expand axially and radially with heat instead of fighting the hat. Anti-noise spring washers keep the float silent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6061-T6 aluminum hat.\u003c\/strong\u003e The hat is machined from U.S.-sourced 6061-T6 aircraft-specification aluminum, cutting rotating and unsprung weight against the one-piece factory casting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved internal vanes\u003c\/strong\u003e act as a centrifugal pump, forcing cooling air through the disc on track.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted, not cross-drilled.\u003c\/strong\u003e Slots sweep the pad face clean without the stress risers that make drilled rotors crack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRebuildable.\u003c\/strong\u003e When the iron is worn out you replace the rings only and keep the hats and hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Viper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e A1-165\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant fitment notes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ew\/CCM.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePriced and sold as a pair — one complete front axle set.\u003c\/li\u003e\n\u003cli\u003eTwo-piece rotor assemblies with aluminum hats, iron rings and all mounting hardware, assembled and ready to bolt on.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787513786666,"sku":"girA1-165","price":1700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/408mm72v__89142.1677861528.jpg?v=1790619401"},{"product_id":"girodisc-dodge-viper-acr-x-gen-4-track-only-model-slotted-front-rotors","title":"GiroDisc Dodge Viper ACR-X (Gen 4 Track-Only Model) Slotted Front Rotors","description":"\u003cp\u003eGiroDisc two-piece slotted front rotors for the Dodge Viper ACR-X (Gen 4 Track-Only Model). These replace the factory one-piece front rotors with a lighter, rebuildable floating assembly built for repeated track use.\u003c\/p\u003e\u003ch3\u003eWhy a GiroDisc two-piece rotor\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloating two-piece design.\u003c\/strong\u003e A cast iron disc ring is mounted to a central hat with high-strength alloy steel drive pins, so the ring can expand axially and radially with heat instead of fighting the hat. Anti-noise spring washers keep the float silent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6061-T6 aluminum hat.\u003c\/strong\u003e The hat is machined from U.S.-sourced 6061-T6 aircraft-specification aluminum, cutting rotating and unsprung weight against the one-piece factory casting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved internal vanes\u003c\/strong\u003e act as a centrifugal pump, forcing cooling air through the disc on track.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted, not cross-drilled.\u003c\/strong\u003e Slots sweep the pad face clean without the stress risers that make drilled rotors crack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRebuildable.\u003c\/strong\u003e When the iron is worn out you replace the rings only and keep the hats and hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Viper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e A1-270\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant fitment notes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eGen 4 Track-Only Model.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePriced and sold as a pair — one complete front axle set.\u003c\/li\u003e\n\u003cli\u003eTwo-piece rotor assemblies with aluminum hats, iron rings and all mounting hardware, assembled and ready to bolt on.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787514048810,"sku":"girA1-270","price":1150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/408mm72v__00126.1677861595.jpg?v=1790619272"},{"product_id":"girodisc-2003-dodge-viper-slotted-rear-rotors","title":"GiroDisc 2003 Dodge Viper Slotted Rear Rotors","description":"\u003cp\u003eGiroDisc two-piece slotted rear rotors for the 2003 Dodge Viper. These replace the factory one-piece rear rotors with a lighter, rebuildable floating assembly built for repeated track use.\u003c\/p\u003e\u003ch3\u003eWhy a GiroDisc two-piece rotor\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloating two-piece design.\u003c\/strong\u003e A cast iron disc ring is mounted to a central hat with high-strength alloy steel drive pins, so the ring can expand axially and radially with heat instead of fighting the hat. Anti-noise spring washers keep the float silent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6061-T6 aluminum hat.\u003c\/strong\u003e The hat is machined from U.S.-sourced 6061-T6 aircraft-specification aluminum, cutting rotating and unsprung weight against the one-piece factory casting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved internal vanes\u003c\/strong\u003e act as a centrifugal pump, forcing cooling air through the disc on track.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted, not cross-drilled.\u003c\/strong\u003e Slots sweep the pad face clean without the stress risers that make drilled rotors crack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRebuildable.\u003c\/strong\u003e When the iron is worn out you replace the rings only and keep the hats and hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Viper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e A2-006\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePriced and sold as a pair — one complete rear axle set.\u003c\/li\u003e\n\u003cli\u003eTwo-piece rotor assemblies with aluminum hats, iron rings and all mounting hardware, assembled and ready to bolt on.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787522568490,"sku":"girA2-006","price":1150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/408mm72v__29840.1677861596.jpg?v=1790619941"},{"product_id":"girodisc-2016-dodge-viper-acr-gen-5-w-ccm-slotted-rear-rotors","title":"GiroDisc 2016+ Dodge Viper ACR Gen 5 (w\/CCM) Slotted Rear Rotors","description":"\u003cp\u003eGiroDisc two-piece slotted rear rotors for the 2016+ Dodge Viper ACR Gen 5 (w\/CCM). These replace the factory one-piece rear rotors with a lighter, rebuildable floating assembly built for repeated track use.\u003c\/p\u003e\u003ch3\u003eWhy a GiroDisc two-piece rotor\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloating two-piece design.\u003c\/strong\u003e A cast iron disc ring is mounted to a central hat with high-strength alloy steel drive pins, so the ring can expand axially and radially with heat instead of fighting the hat. Anti-noise spring washers keep the float silent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6061-T6 aluminum hat.\u003c\/strong\u003e The hat is machined from U.S.-sourced 6061-T6 aircraft-specification aluminum, cutting rotating and unsprung weight against the one-piece factory casting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved internal vanes\u003c\/strong\u003e act as a centrifugal pump, forcing cooling air through the disc on track.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted, not cross-drilled.\u003c\/strong\u003e Slots sweep the pad face clean without the stress risers that make drilled rotors crack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRebuildable.\u003c\/strong\u003e When the iron is worn out you replace the rings only and keep the hats and hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Viper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e A2-165\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant fitment notes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ew\/CCM.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePriced and sold as a pair — one complete rear axle set.\u003c\/li\u003e\n\u003cli\u003eTwo-piece rotor assemblies with aluminum hats, iron rings and all mounting hardware, assembled and ready to bolt on.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787528368426,"sku":"girA2-165","price":1600.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/408mm72v__55181.1677861687.jpg?v=1790619841"},{"product_id":"girodisc-dodge-viper-ta-2-0-slotted-rear-rotors","title":"GiroDisc Dodge Viper TA 2.0 Slotted Rear Rotors","description":"\u003cp\u003eGiroDisc two-piece slotted rear rotors for the Dodge Viper TA 2.0. These replace the factory one-piece rear rotors with a lighter, rebuildable floating assembly built for repeated track use.\u003c\/p\u003e\u003ch3\u003eWhy a GiroDisc two-piece rotor\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloating two-piece design.\u003c\/strong\u003e A cast iron disc ring is mounted to a central hat with high-strength alloy steel drive pins, so the ring can expand axially and radially with heat instead of fighting the hat. Anti-noise spring washers keep the float silent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6061-T6 aluminum hat.\u003c\/strong\u003e The hat is machined from U.S.-sourced 6061-T6 aircraft-specification aluminum, cutting rotating and unsprung weight against the one-piece factory casting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved internal vanes\u003c\/strong\u003e act as a centrifugal pump, forcing cooling air through the disc on track.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted, not cross-drilled.\u003c\/strong\u003e Slots sweep the pad face clean without the stress risers that make drilled rotors crack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRebuildable.\u003c\/strong\u003e When the iron is worn out you replace the rings only and keep the hats and hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Viper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e A2-270\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePriced and sold as a pair — one complete rear axle set.\u003c\/li\u003e\n\u003cli\u003eTwo-piece rotor assemblies with aluminum hats, iron rings and all mounting hardware, assembled and ready to bolt on.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787531972906,"sku":"girA2-270","price":1150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/408mm72v__24004.1677861730.jpg?v=1790619794"},{"product_id":"girodisc-2003-dodge-viper-front-caliper-rebuild-kit","title":"GiroDisc 2003 Dodge Viper Front Caliper Rebuild Kit","description":"\u003cp\u003eGiroDisc caliper rebuild kit for the 2003 Dodge Viper, front caliper. Everything needed to reseal one caliper — piston seals and dust boots — so a leaking or dragging caliper can be serviced instead of replaced.\u003c\/p\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEach kit covers one caliper.\u003c\/strong\u003e Order two for a complete axle.\u003c\/li\u003e\n\u003cli\u003eContains piston seals and dust boots matched to this caliper's piston sizes.\u003c\/li\u003e\n\u003cli\u003eBrake fluid must be flushed and the system bled after a rebuild.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Viper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e CCRK1-006\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787533545770,"sku":"girCCRK1-006","price":56.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/CCRK-C4__09690.1690384030.jpg?v=1790620221"},{"product_id":"girodisc-2003-dodge-viper-rear-caliper-rebuild-kit","title":"GiroDisc 2003 Dodge Viper Rear Caliper Rebuild Kit","description":"\u003cp\u003eGiroDisc caliper rebuild kit for the 2003 Dodge Viper, rear caliper. Everything needed to reseal one caliper — piston seals and dust boots — so a leaking or dragging caliper can be serviced instead of replaced.\u003c\/p\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEach kit covers one caliper.\u003c\/strong\u003e Order two for a complete axle.\u003c\/li\u003e\n\u003cli\u003eContains piston seals and dust boots matched to this caliper's piston sizes.\u003c\/li\u003e\n\u003cli\u003eBrake fluid must be flushed and the system bled after a rebuild.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Viper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e CCRK2-006\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787540263210,"sku":"girCCRK2-006","price":56.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/CCRK-C4__84858.1771332537.jpg?v=1790620221"},{"product_id":"girodisc-2016-dodge-viper-acr-gen-5-w-ccm-slotted-rear-rings","title":"GiroDisc 2016+ Dodge Viper ACR Gen 5 (w\/CCM) Slotted Rear Rings","description":"\u003cp\u003eGiroDisc replacement cast iron rotor rings for the 2016+ Dodge Viper ACR Gen 5 (w\/CCM), rear axle. When the iron is worn or heat-checked, you replace the rings and keep the hats — the reason a two-piece rotor is cheaper to own over time.\u003c\/p\u003e\u003ch3\u003eAbout replacement rings\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRings only — \u003cstrong\u003ealuminum hats are not included\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eNew installation hardware (cap screws, hardened washers and anti-noise spring washers) is supplied. GiroDisc does not recommend reusing old hardware.\u003c\/li\u003e\n\u003cli\u003eSlotted friction surface with curved internal cooling vanes, same specification as the original assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThese rings are machined for GiroDisc hats and will not mount to factory center hats.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Viper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e D2-111\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant fitment notes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ew\/CCM.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePriced and sold as a pair — one axle set of rings, plus new mounting hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787558121770,"sku":"girD2-111","price":880.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/rings__83607.1689725225.jpg?v=1790620100"},{"product_id":"girodisc-2003-dodge-viper-front-titanium-pad-shields","title":"GiroDisc 2003 Dodge Viper Front Titanium Pad Shields","description":"\u003cp\u003eGiroDisc titanium pad shields for the 2003 Dodge Viper, front axle. A thin titanium shim sits between the pad backing plate and the caliper pistons, so braking heat stays in the pad instead of soaking into the pistons and brake fluid.\u003c\/p\u003e\u003ch3\u003eWhy titanium shims\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTitanium has very low thermal conductivity — it is the simplest way to keep fluid temperatures down on long track sessions and stop a soft or long pedal late in a run.\u003c\/li\u003e\n\u003cli\u003eWater-jet cut to the exact pad shape: no cutting, grinding or fitting required.\u003c\/li\u003e\n\u003cli\u003eWorks with your existing pads and calipers; fit them at your next pad change.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Viper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e TS-0810-4\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePriced per axle — four shields, one per pad.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787560939818,"sku":"girTS-0810-4","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/ts__02984.1638316287.jpg?v=1790620419"},{"product_id":"hawk-hps-5-0-front-brake-pads-2003-2006-dodge-viper-srt-10-hb193b-670","title":"Hawk HPS 5.0 Front Brake Pads - 2003-2006 Dodge Viper SRT-10 (HB193B.670)","description":"\u003cp\u003eHawk HPS 5.0 front brake pads for the 2003-2006 Dodge Viper SRT-10. Aggressive torque, great rotor and pad wear life, smooth and predictable control, and consistent release for big motors and high deceleration rates.\u003c\/p\u003e\u003cp\u003eSee the \u003ca href=\"\/pages\/hawk-brake-pad-compounds\"\u003eHawk compound guide\u003c\/a\u003e. Please confirm fitment: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e with your car, year and caliper. Installation available at our shop in Andover, NJ.\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":52928115802410,"sku":"hawkHB193B.670","price":206.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/4317ee8243bfd1a7997d04f1bd641ff5_09cfd345-8acc-48ec-9516-3d050085b310.jpg?v=1791905456"},{"product_id":"hawk-hps-front-brake-pads-92-02-dodge-viper-hb194f-665","title":"Hawk HPS Front Brake Pads - 1992-2002 Dodge Viper (HB194F.665)","description":"\u003cp\u003eHawk HPS front brake pads for the 1992-2002 Dodge Viper. High Performance Street: Hawk reports 20-40% more stopping power than standard replacement pads, with higher thermal capability, better pedal feel and less dust.\u003c\/p\u003e\u003cp\u003eSee the \u003ca href=\"\/pages\/hawk-brake-pad-compounds\"\u003eHawk compound guide\u003c\/a\u003e. Please confirm fitment: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e with your car, year and caliper. Installation available at our shop in Andover, NJ.\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":52928117145898,"sku":"hawkHB194F.665","price":177.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/66cc0e549dab96f12cca7008b75dba88.jpg?v=1791905466"},{"product_id":"hawk-hps-5-0-front-brake-pads-92-02-dodge-viper-hb194b-665","title":"Hawk HPS 5.0 Front Brake Pads - 1992-2002 Dodge Viper (HB194B.665)","description":"\u003cp\u003eHawk HPS 5.0 front brake pads for the 1992-2002 Dodge Viper. Aggressive torque, great rotor and pad wear life, smooth and predictable control, and consistent release for big motors and high deceleration rates.\u003c\/p\u003e\u003cp\u003eSee the \u003ca href=\"\/pages\/hawk-brake-pad-compounds\"\u003eHawk compound guide\u003c\/a\u003e. Please confirm fitment: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e with your car, year and caliper. Installation available at our shop in Andover, NJ.\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":52928117178666,"sku":"hawkHB194B.665","price":191.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/4317ee8243bfd1a7997d04f1bd641ff5_09cfd345-8acc-48ec-9516-3d050085b310.jpg?v=1791905456"},{"product_id":"hawk-er-1-front-brake-pads-92-02-dodge-viper-hb194d-665","title":"Hawk ER-1 Front Brake Pads - 1992-2002 Dodge Viper (HB194D.665)","description":"\u003cp\u003eHawk ER-1 front brake pads for the 1992-2002 Dodge Viper. Endurance race compound with a higher friction coefficient than competing endurance pads at matching or better life. Race compound: needs heat to work and may not suit daily street driving.\u003c\/p\u003e\u003cp\u003eSee the \u003ca href=\"\/pages\/hawk-brake-pad-compounds\"\u003eHawk compound guide\u003c\/a\u003e. Please confirm fitment: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e with your car, year and caliper. Installation available at our shop in Andover, NJ.\u003c\/p\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":52928117211434,"sku":"hawkHB194D.665","price":292.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/9aa5af49dc9cc65a96586d2015607f32L_cb306621-3de1-45a5-a0ed-ad38ca01bda0.jpg?v=1791905953"},{"product_id":"dba42431s-dodge-viper-4000-series-t3-slotted-rear-brake-rotor","title":"DBA Dodge Viper 4000 Series T3 Slotted Rear Brake Rotor (DBA42431S)","description":"\u003cp\u003eThe DBA 4000 Series T3 Slotted rear rotor for the Dodge Viper is built by Disc Brakes Australia (DBA), a specialist rotor maker with more than 45 years in the business. This one has DBA's T3 slot pattern: precision CNC-machined slots, with more exit points for pad dust and gas than the T2, for a quieter, more consistent pedal. DBA rotors are sold individually, so order two for a full axle set.\u003c\/p\u003e\u003ch3\u003eRotor details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one-piece vented rotor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e DBA 4000 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace:\u003c\/strong\u003e slotted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter diameter:\u003c\/strong\u003e 330 mm (12.99 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 22.6 mm (0.89 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall height:\u003c\/strong\u003e 43.7 mm (1.72 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter bore:\u003c\/strong\u003e 73.5 mm (2.89 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt pattern:\u003c\/strong\u003e 5 x 114.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e about 16.3 lb per rotor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually (one rotor per part number)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Viper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDBA part number:\u003c\/strong\u003e DBA42431S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listed by DBA:\u003c\/strong\u003e 92-02 Dodge Viper Brakes Rear Slotted 4000 Series Rotor\u003c\/li\u003e\n\u003cli\u003eBrake packages and rotor sizes vary within a model line, so compare this rotor's 330 mm diameter with your current rotor before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout the DBA 4000 Series\u003c\/h3\u003e\u003cp\u003eThe 4000 Series is DBA's one-piece performance upgrade. It is cast from XG-150 high-carbon alloyed iron and put through Thermal Stability Profiling (TSP), so the rotor copes with repeated heat cycles in hard braking. Vented versions use DBA's Kangaroo Paw vane layout (144 diamond and teardrop-shaped pillars), which DBA says adds surface area and cooling efficiency compared with a straight-vane design.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eDBA rotors are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"DBA","offers":[{"title":"Default Title","offer_id":52936686502186,"sku":"dbaDBA42431S","price":257.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/cc859e8d05f566aafd9787870a279230L_4c3af4b3-56e4-4e20-b011-a634a113002e.png?v=1791955412"},{"product_id":"dba42448-dodge-viper-4000-series-hd-plain-front-brake-rotor","title":"DBA Dodge Viper 4000 Series HD Plain Front Brake Rotor (DBA42448)","description":"\u003cp\u003eThe DBA 4000 Series HD Plain front rotor for the Dodge Viper is built by Disc Brakes Australia (DBA), a specialist rotor maker with more than 45 years in the business. This one has the HD finish, a smooth OE-style face for drivers who want 4000 Series strength without a drilled or slotted look (it also suits race classes that require an OE-style rotor). DBA rotors are sold individually, so order two for a full axle set.\u003c\/p\u003e\u003ch3\u003eRotor details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one-piece vented rotor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e DBA 4000 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace:\u003c\/strong\u003e plain (smooth)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter diameter:\u003c\/strong\u003e 355 mm (13.98 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 32 mm (1.26 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall height:\u003c\/strong\u003e 59.6 mm (2.35 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter bore:\u003c\/strong\u003e 73.5 mm (2.89 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt holes:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually (one rotor per part number)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Viper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDBA part number:\u003c\/strong\u003e DBA42448\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listed by DBA:\u003c\/strong\u003e 13-17 SRT Viper Front 4000 Series Standard Rotor\u003c\/li\u003e\n\u003cli\u003eBrake packages and rotor sizes vary within a model line, so compare this rotor's 355 mm diameter with your current rotor before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout the DBA 4000 Series\u003c\/h3\u003e\u003cp\u003eThe 4000 Series is DBA's one-piece performance upgrade. It is cast from XG-150 high-carbon alloyed iron and put through Thermal Stability Profiling (TSP), so the rotor copes with repeated heat cycles in hard braking. Vented versions use DBA's Kangaroo Paw vane layout (144 diamond and teardrop-shaped pillars), which DBA says adds surface area and cooling efficiency compared with a straight-vane design.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eDBA rotors are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"DBA","offers":[{"title":"Default Title","offer_id":52936688206122,"sku":"dbaDBA42448","price":224.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/b5849160e88173aa70b42bbdb7710cc2.png?v=1791955459"},{"product_id":"dba42448blkxs-dodge-viper-4000-series-xs-drilled-and-slotted-front-brake-rotor","title":"DBA Dodge Viper 4000 Series XS Drilled \u0026 Slotted Front Brake Rotor, Black Hat (DBA42448BLKXS)","description":"\u003cp\u003eThe DBA 4000 Series XS Drilled \u0026amp; Slotted front rotor for the Dodge Viper is built by Disc Brakes Australia (DBA), a specialist rotor maker with more than 45 years in the business. This one has DBA's XS pattern: a non-directional drilled and slotted face that lets pad dust and gas escape. The hat is finished in black. DBA rotors are sold individually, so order two for a full axle set.\u003c\/p\u003e\u003ch3\u003eRotor details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one-piece vented rotor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e DBA 4000 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace:\u003c\/strong\u003e drilled \u0026amp; slotted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHat finish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter diameter:\u003c\/strong\u003e 355 mm (13.98 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 32 mm (1.26 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall height:\u003c\/strong\u003e 59.3 mm (2.33 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter bore:\u003c\/strong\u003e 73.5 mm (2.89 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt pattern:\u003c\/strong\u003e 6 x 114.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e about 27.3 lb per rotor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually (one rotor per part number)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Viper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDBA part number:\u003c\/strong\u003e DBA42448BLKXS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listed by DBA:\u003c\/strong\u003e 13-17 SRT Viper (w\/1 Pc Rotor Excl TA Package) Front 4000 Series Cross Drilled Rotor w\/Blk Hat\u003c\/li\u003e\n\u003cli\u003eBrake packages and rotor sizes vary within a model line, so compare this rotor's 355 mm diameter with your current rotor before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout the DBA 4000 Series\u003c\/h3\u003e\u003cp\u003eThe 4000 Series is DBA's one-piece performance upgrade. It is cast from XG-150 high-carbon alloyed iron and put through Thermal Stability Profiling (TSP), so the rotor copes with repeated heat cycles in hard braking. Vented versions use DBA's Kangaroo Paw vane layout (144 diamond and teardrop-shaped pillars), which DBA says adds surface area and cooling efficiency compared with a straight-vane design.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eDBA rotors are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"DBA","offers":[{"title":"Default Title","offer_id":52936688238890,"sku":"dbaDBA42448BLKXS","price":345.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/0892629579fbc8581b57a566424184e4L_acc2f27d-f916-4c3e-8e6b-4f13915f48bd.png?v=1791955459"},{"product_id":"dba42448s-dodge-viper-4000-series-t3-slotted-front-brake-rotor","title":"DBA Dodge Viper 4000 Series T3 Slotted Front Brake Rotor (DBA42448S)","description":"\u003cp\u003eThe DBA 4000 Series T3 Slotted front rotor for the Dodge Viper is built by Disc Brakes Australia (DBA), a specialist rotor maker with more than 45 years in the business. This one has DBA's T3 slot pattern: precision CNC-machined slots, with more exit points for pad dust and gas than the T2, for a quieter, more consistent pedal. DBA rotors are sold individually, so order two for a full axle set.\u003c\/p\u003e\u003ch3\u003eRotor details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one-piece vented rotor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e DBA 4000 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace:\u003c\/strong\u003e slotted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter diameter:\u003c\/strong\u003e 355 mm (13.98 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 32 mm (1.26 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall height:\u003c\/strong\u003e 59.3 mm (2.33 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter bore:\u003c\/strong\u003e 73.5 mm (2.89 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt pattern:\u003c\/strong\u003e 6 x 114.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e about 27.3 lb per rotor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually (one rotor per part number)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Viper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDBA part number:\u003c\/strong\u003e DBA42448S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listed by DBA:\u003c\/strong\u003e 03-05 Dodge Viper Brakes Front Slotted 4000 Series Rotor\u003c\/li\u003e\n\u003cli\u003eBrake packages and rotor sizes vary within a model line, so compare this rotor's 355 mm diameter with your current rotor before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout the DBA 4000 Series\u003c\/h3\u003e\u003cp\u003eThe 4000 Series is DBA's one-piece performance upgrade. It is cast from XG-150 high-carbon alloyed iron and put through Thermal Stability Profiling (TSP), so the rotor copes with repeated heat cycles in hard braking. Vented versions use DBA's Kangaroo Paw vane layout (144 diamond and teardrop-shaped pillars), which DBA says adds surface area and cooling efficiency compared with a straight-vane design.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eDBA rotors are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"DBA","offers":[{"title":"Default Title","offer_id":52936688304426,"sku":"dbaDBA42448S","price":303.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/cc859e8d05f566aafd9787870a279230L_9cd55875-8da4-471a-b6b4-59b20c0f3887.png?v=1791955460"},{"product_id":"dba42449-dodge-viper-4000-series-hd-plain-rear-brake-rotor","title":"DBA Dodge Viper 4000 Series HD Plain Rear Brake Rotor (DBA42449)","description":"\u003cp\u003eThe DBA 4000 Series HD Plain rear rotor for the Dodge Viper is built by Disc Brakes Australia (DBA), a specialist rotor maker with more than 45 years in the business. This one has the HD finish, a smooth OE-style face for drivers who want 4000 Series strength without a drilled or slotted look (it also suits race classes that require an OE-style rotor). DBA rotors are sold individually, so order two for a full axle set.\u003c\/p\u003e\u003ch3\u003eRotor details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one-piece vented rotor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e DBA 4000 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace:\u003c\/strong\u003e plain (smooth)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter diameter:\u003c\/strong\u003e 355 mm (13.98 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 32 mm (1.26 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall height:\u003c\/strong\u003e 52.2 mm (2.06 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter bore:\u003c\/strong\u003e 73.5 mm (2.89 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt holes:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually (one rotor per part number)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Viper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDBA part number:\u003c\/strong\u003e DBA42449\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listed by DBA:\u003c\/strong\u003e 13-17 SRT Viper Rear 4000 Series Standard Rotor\u003c\/li\u003e\n\u003cli\u003eBrake packages and rotor sizes vary within a model line, so compare this rotor's 355 mm diameter with your current rotor before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout the DBA 4000 Series\u003c\/h3\u003e\u003cp\u003eThe 4000 Series is DBA's one-piece performance upgrade. It is cast from XG-150 high-carbon alloyed iron and put through Thermal Stability Profiling (TSP), so the rotor copes with repeated heat cycles in hard braking. Vented versions use DBA's Kangaroo Paw vane layout (144 diamond and teardrop-shaped pillars), which DBA says adds surface area and cooling efficiency compared with a straight-vane design.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eDBA rotors are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"DBA","offers":[{"title":"Default Title","offer_id":52936688337194,"sku":"dbaDBA42449","price":236.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/f37ac6ce25f88fcb4d30f3cf9b687a6e.png?v=1791955462"},{"product_id":"dba42449s-dodge-viper-4000-series-t3-slotted-rear-brake-rotor","title":"DBA Dodge Viper 4000 Series T3 Slotted Rear Brake Rotor (DBA42449S)","description":"\u003cp\u003eThe DBA 4000 Series T3 Slotted rear rotor for the Dodge Viper is built by Disc Brakes Australia (DBA), a specialist rotor maker with more than 45 years in the business. This one has DBA's T3 slot pattern: precision CNC-machined slots, with more exit points for pad dust and gas than the T2, for a quieter, more consistent pedal. DBA rotors are sold individually, so order two for a full axle set.\u003c\/p\u003e\u003ch3\u003eRotor details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one-piece vented rotor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e DBA 4000 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace:\u003c\/strong\u003e slotted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter diameter:\u003c\/strong\u003e 355 mm (13.98 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 32 mm (1.26 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall height:\u003c\/strong\u003e 52.2 mm (2.06 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter bore:\u003c\/strong\u003e 73.5 mm (2.89 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt pattern:\u003c\/strong\u003e 6 x 114.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e about 27.1 lb per rotor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually (one rotor per part number)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Viper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDBA part number:\u003c\/strong\u003e DBA42449S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listed by DBA:\u003c\/strong\u003e 03-05 Dodge Viper Brakes Rear Slotted 4000 Series Rotor\u003c\/li\u003e\n\u003cli\u003eBrake packages and rotor sizes vary within a model line, so compare this rotor's 355 mm diameter with your current rotor before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout the DBA 4000 Series\u003c\/h3\u003e\u003cp\u003eThe 4000 Series is DBA's one-piece performance upgrade. It is cast from XG-150 high-carbon alloyed iron and put through Thermal Stability Profiling (TSP), so the rotor copes with repeated heat cycles in hard braking. Vented versions use DBA's Kangaroo Paw vane layout (144 diamond and teardrop-shaped pillars), which DBA says adds surface area and cooling efficiency compared with a straight-vane design.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eDBA rotors are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"DBA","offers":[{"title":"Default Title","offer_id":52936689680682,"sku":"dbaDBA42449S","price":303.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/cc859e8d05f566aafd9787870a279230L_2ff59090-6110-49ef-894c-4fd58ee4868b.png?v=1791955507"},{"product_id":"dba52448blks-dodge-viper-5000-series-t3-slotted-2-piece-front-brake-rotor","title":"DBA Dodge Viper 5000 Series T3 Slotted 2-Piece Front Brake Rotor, Black Hat (DBA52448BLKS)","description":"\u003cp\u003eThe DBA 5000 Series T3 Slotted 2-Piece front rotor for the Dodge Viper is built by Disc Brakes Australia (DBA), a specialist rotor maker with more than 45 years in the business. This one has DBA's T3 slot pattern: precision CNC-machined slots, with more exit points for pad dust and gas than the T2, for a quieter, more consistent pedal. The hat is finished in black. DBA rotors are sold individually, so order two for a full axle set.\u003c\/p\u003e\u003ch3\u003eRotor details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e two-piece, cast-iron ring with aluminum hat, vented\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e DBA 5000 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace:\u003c\/strong\u003e slotted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHat finish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually (one rotor per part number)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Viper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDBA part number:\u003c\/strong\u003e DBA52448BLKS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listed by DBA:\u003c\/strong\u003e 13-17 SRT Viper (1 Pc Disc Excl TA Package) Front 5000 Series Slotted Rotor w\/Black Hat\u003c\/li\u003e\n\u003cli\u003eBrake packages and rotor sizes vary within a model line, so confirm your current rotor diameter before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout the DBA 5000 Series\u003c\/h3\u003e\u003cp\u003eThe 5000 Series is DBA's two-piece composite rotor: a high-carbon cast-iron ring bolted to an aerospace-grade T6061-T6 aluminum hat with NAS bolts and crimp nuts. The aluminum hat lowers unsprung weight and passes less heat into the hub, while the iron ring expands evenly. DBA recommends it for high-performance street cars, track days, club racing and rally. Vented versions use DBA's Kangaroo Paw vane layout (144 diamond and teardrop-shaped pillars), which DBA says adds surface area and cooling efficiency compared with a straight-vane design.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eDBA rotors are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"DBA","offers":[{"title":"Default Title","offer_id":52936693678378,"sku":"dbaDBA52448BLKS","price":625.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/795bcc6a9b903ee815771c276ef51c63.jpg?v=1791955669"},{"product_id":"dba52448blkxs-dodge-viper-5000-series-xs-drilled-and-slotted-2-piece-front-brake-rotor","title":"DBA Dodge Viper 5000 Series XS Drilled \u0026 Slotted 2-Piece Front Brake Rotor, Black Hat (DBA52448BLKXS)","description":"\u003cp\u003eThe DBA 5000 Series XS Drilled \u0026amp; Slotted 2-Piece front rotor for the Dodge Viper is built by Disc Brakes Australia (DBA), a specialist rotor maker with more than 45 years in the business. This one has DBA's XS pattern: a non-directional drilled and slotted face that lets pad dust and gas escape. The hat is finished in black. DBA rotors are sold individually, so order two for a full axle set.\u003c\/p\u003e\u003ch3\u003eRotor details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e two-piece, cast-iron ring with aluminum hat, vented\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e DBA 5000 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace:\u003c\/strong\u003e drilled \u0026amp; slotted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHat finish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter diameter:\u003c\/strong\u003e 355 mm (13.98 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 32 mm (1.26 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall height:\u003c\/strong\u003e 59.6 mm (2.35 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter bore:\u003c\/strong\u003e 73.5 mm (2.89 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt pattern:\u003c\/strong\u003e 5 x 114.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e about 23.7 lb per rotor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually (one rotor per part number)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Viper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDBA part number:\u003c\/strong\u003e DBA52448BLKXS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listed by DBA:\u003c\/strong\u003e 13-17 SRT Viper (1 Pc Disc Excl TA Package) Front 5000 Series Slotted Rotor w\/Black Hat\u003c\/li\u003e\n\u003cli\u003eBrake packages and rotor sizes vary within a model line, so compare this rotor's 355 mm diameter with your current rotor before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout the DBA 5000 Series\u003c\/h3\u003e\u003cp\u003eThe 5000 Series is DBA's two-piece composite rotor: a high-carbon cast-iron ring bolted to an aerospace-grade T6061-T6 aluminum hat with NAS bolts and crimp nuts. The aluminum hat lowers unsprung weight and passes less heat into the hub, while the iron ring expands evenly. DBA recommends it for high-performance street cars, track days, club racing and rally. Vented versions use DBA's Kangaroo Paw vane layout (144 diamond and teardrop-shaped pillars), which DBA says adds surface area and cooling efficiency compared with a straight-vane design.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eDBA rotors are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"DBA","offers":[{"title":"Default Title","offer_id":52936693743914,"sku":"dbaDBA52448BLKXS","price":784.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/ebaba1ca22d9f0ebc434f364f38d9f40L_17474b46-d2d2-4a5c-91b1-c3e952d6cc9f.jpg?v=1791955669"},{"product_id":"ebcdp31164c-dodge-viper-redstuff-ceramic-low-dust-rear-brake-pads","title":"EBC Dodge Viper Redstuff Ceramic Low-Dust Rear Brake Pads (DP31164C)","description":"\u003cp\u003eThe EBC Redstuff Ceramic Low-Dust rear brake pad set for the Dodge Viper is made by EBC Brakes and is intended for fast street driving (low dust). Pads are sold as a set for one axle, so this part number covers the rear axle only.\u003c\/p\u003e\u003ch3\u003ePad details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompound:\u003c\/strong\u003e EBC Redstuff (3000 Series, ceramic)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntended use:\u003c\/strong\u003e fast street driving (low dust)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e as a set for one axle (one part number per axle)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Viper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEBC part number:\u003c\/strong\u003e DP31164C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listed by EBC:\u003c\/strong\u003e 01-02 Dodge Viper 8.0 Redstuff Rear Brake Pads\u003c\/li\u003e\n\u003cli\u003eBrake packages vary within a model line, so compare your current pads and caliper with the application above before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout EBC Redstuff\u003c\/h3\u003e\u003cp\u003eRedstuff is EBC's 3000 Series ceramic street pad. It uses a full ceramic-based formula with no steel fibers, which EBC describes as the lowest-dust pad in its range, with good cold bite and a firm pedal feel across its temperature range. It is aimed at fast street driving on performance and premium cars.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEBC pads are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We fit brake pads and bleed the system in house, \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e, and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":52939369611562,"sku":"ebcDP31164C","price":139.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/bd40b34802493674d20a1bdee8dd96c7L_2d5dba0f-f975-43e8-8175-30ee7a16e33e.jpg?v=1791987005"},{"product_id":"ebcdp41164r-dodge-viper-yellowstuff-4000-series-rear-brake-pads","title":"EBC Dodge Viper Yellowstuff 4000 Series Rear Brake Pads (DP41164R)","description":"\u003cp\u003eThe EBC Yellowstuff 4000 Series rear brake pad set for the Dodge Viper is made by EBC Brakes and is intended for street and track driving. Pads are sold as a set for one axle, so this part number covers the rear axle only.\u003c\/p\u003e\u003ch3\u003ePad details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompound:\u003c\/strong\u003e EBC Yellowstuff (4000 Series, aramid fiber)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntended use:\u003c\/strong\u003e street and track driving\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e as a set for one axle (one part number per axle)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot included:\u003c\/strong\u003e mounting hardware, abutment clips and brake lubricant\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Viper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEBC part number:\u003c\/strong\u003e DP41164R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listed by EBC:\u003c\/strong\u003e 01-02 Dodge Viper 8.0 Yellowstuff Rear Brake Pads\u003c\/li\u003e\n\u003cli\u003eBrake packages vary within a model line, so compare your current pads and caliper with the application above before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout EBC Yellowstuff\u003c\/h3\u003e\u003cp\u003eYellowstuff is EBC's 4000 Series pad, built on an aramid-fiber compound for street and track driving. EBC says it brakes strongly from cold with no warm-up needed and gets stronger as it heats up in hard driving. It is not a low-dust pad; EBC points drivers who want low dust to Redstuff.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEBC pads are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We fit brake pads and bleed the system in house, \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e, and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":52939369644330,"sku":"ebcDP41164R","price":170.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/696be41fe38932a53034f47ddfcf12c6L_0e3d2b58-1332-4610-b954-8d79f2b3e41f.jpg?v=1791987005"},{"product_id":"ebcdp51164ndx-dodge-viper-bluestuff-ndx-rear-brake-pads","title":"EBC Dodge Viper Bluestuff NDX Rear Brake Pads (DP51164NDX)","description":"\u003cp\u003eThe EBC Bluestuff NDX rear brake pad set for the Dodge Viper is made by EBC Brakes and is intended for aggressive street driving and certain types of track use. Pads are sold as a set for one axle, so this part number covers the rear axle only.\u003c\/p\u003e\u003ch3\u003ePad details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompound:\u003c\/strong\u003e EBC Bluestuff NDX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntended use:\u003c\/strong\u003e aggressive street driving and certain types of track use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e as a set for one axle (one part number per axle)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot included:\u003c\/strong\u003e mounting hardware, abutment clips and brake lubricant\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Viper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEBC part number:\u003c\/strong\u003e DP51164NDX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listed by EBC:\u003c\/strong\u003e 01-02 Dodge Viper 8.0 Bluestuff Rear Brake Pads\u003c\/li\u003e\n\u003cli\u003eBrake packages vary within a model line, so compare your current pads and caliper with the application above before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout EBC Bluestuff NDX\u003c\/h3\u003e\u003cp\u003eBluestuff NDX is EBC's high-friction sport and race pad for aggressive street driving and certain types of track use. EBC says its main strengths are bite from cold and a progressive pedal feel. It works best with quality aftermarket multi-piston calipers and larger rotors; on some older street-based calipers, pad size and caliper drag can limit how well any track pad works.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEBC pads are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We fit brake pads and bleed the system in house, \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e, and can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":52939369677098,"sku":"ebcDP51164NDX","price":153.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/11b8b7bd8a6a48566bfda04613dbc10dL_e1ebf694-260f-4768-83b6-a320b2875f2f.jpg?v=1791987006"},{"product_id":"kw15227004-v2-coilover-kit-for-dodge-viper-r-sr-rt-10-gts-rt-10-w-rear-fork-mounts","title":"KW V2 Coilover Kit for Dodge Viper (R, SR, RT\/10) GTS \u0026 RT\/10 w\/ Rear Fork Mounts (15227004)","description":"\u003cp\u003eThe KW V2 Coilover Kit for the Dodge Viper (R, SR, RT\/10) GTS \u0026amp; RT\/10 w\/ Rear Fork Mounts is a rebound-adjustable street coilover with stainless-steel INOX-LINE struts. Sixteen clicks of rebound adjustment let you set the car up for more comfort or more control. Part 15227004.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e V2 Coilover Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront lowering:\u003c\/strong\u003e 0.8–1.5 in (20–40 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear lowering:\u003c\/strong\u003e 0.8–1.5 in (20–40 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring rate (F\/R):\u003c\/strong\u003e 515 \/ 685 lbs\/in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless-steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e INOX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver, Yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e one KW part number; contents follow KW's listing for this application\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Viper (R, SR, RT\/10) GTS \u0026amp; RT\/10 w\/ Rear Fork Mounts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 1996-2002 Dodge Viper (ACR, Base, GT2, GTS, R\/T-10)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKW part number:\u003c\/strong\u003e 15227004\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e Coilover Kit V2 Dodge Viper (R SR RT\/10) GTS; RT\/10w\/ rear fork mounts\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout KW V2\u003c\/h3\u003e\u003cp\u003eV2 adds KW's TVR-A (Twin Valve Rebound Adjustable) technology: 16 clicks of rebound adjustment that change the damping without affecting the compression setting KW has already tuned for the car.\u003c\/p\u003e\u003cp\u003eKW builds its coilovers by hand at its headquarters in Fichtenberg, Germany. Each one carries an individual serial number, and KW says every damper is dyno tested before it ships. KW develops vehicle-specific damper and spring setups on the Nürburgring Nordschleife and in its own 7-post test center.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eKW kits are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"KW","offers":[{"title":"Default Title","offer_id":52940462522666,"sku":"kw15227004","price":5394.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/edd2aab57ba94789cbc39530e91f0142.jpg?v=1792001940"},{"product_id":"kw15227014-v2-coilover-kit-for-dodge-viper-sr-rt-10-w-rear-eye-mounts","title":"KW V2 Coilover Kit for Dodge Viper (SR RT\/10) w\/ rear eye mounts (15227014)","description":"\u003cp\u003eThe KW V2 Coilover Kit for the Dodge Viper (SR RT\/10) w\/ rear eye mounts is a rebound-adjustable street coilover with stainless-steel INOX-LINE struts. Sixteen clicks of rebound adjustment let you set the car up for more comfort or more control. Part 15227014.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e V2 Coilover Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront lowering:\u003c\/strong\u003e 0.8–1.5 in (20–40 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear lowering:\u003c\/strong\u003e 0.8–1.5 in (20–40 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring rate (F\/R):\u003c\/strong\u003e 515 \/ 855 lbs\/in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless-steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e INOX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver, Yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e one KW part number; contents follow KW's listing for this application\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Viper (SR RT\/10) w\/ rear eye mounts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 1994-1996 Dodge Viper (Base, GTS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKW part number:\u003c\/strong\u003e 15227014\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e Coilover Kit V2 Dodge Viper (SR RT\/10)w\/ rear eye mounts\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout KW V2\u003c\/h3\u003e\u003cp\u003eV2 adds KW's TVR-A (Twin Valve Rebound Adjustable) technology: 16 clicks of rebound adjustment that change the damping without affecting the compression setting KW has already tuned for the car.\u003c\/p\u003e\u003cp\u003eKW builds its coilovers by hand at its headquarters in Fichtenberg, Germany. Each one carries an individual serial number, and KW says every damper is dyno tested before it ships. KW develops vehicle-specific damper and spring setups on the Nürburgring Nordschleife and in its own 7-post test center.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eKW kits are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"KW","offers":[{"title":"Default Title","offer_id":52940462719274,"sku":"kw15227014","price":5234.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/c18aa4a3bbde27bd1e8fb1ac3d106609.jpg?v=1792001941"},{"product_id":"kw15227505-v2-coilover-kit-for-dodge-viper-zb-srt-10-w-rear-fork-mounts-aluminum-shock-bodies","title":"KW V2 Coilover Kit for Dodge Viper (ZB) SRT-10 w\/ Rear Fork Mounts, Aluminum Shock Bodies (15227505)","description":"\u003cp\u003eThe KW V2 Coilover Kit for the Dodge Viper (ZB) SRT-10 w\/ Rear Fork Mounts, Aluminum Shock Bodies is a rebound-adjustable street coilover with stainless-steel INOX-LINE struts. Sixteen clicks of rebound adjustment let you set the car up for more comfort or more control. Part 15227505.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e V2 Coilover Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront lowering:\u003c\/strong\u003e 0.8–1.5 in (20–40 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear lowering:\u003c\/strong\u003e 0.8–1.5 in (20–40 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring rate (F\/R):\u003c\/strong\u003e 340 \/ 685 lbs\/in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless-steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e INOX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver, Yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e one KW part number; contents follow KW's listing for this application\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Viper (ZB) SRT-10 w\/ Rear Fork Mounts, Aluminum Shock Bodies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2003-2006 Dodge Viper (SRT-10)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKW part number:\u003c\/strong\u003e 15227505\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e Coilover Kit V2 Dodge Viper (ZB) SRT-10w\/ rear fork mounts aluminum shock bodies\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout KW V2\u003c\/h3\u003e\u003cp\u003eV2 adds KW's TVR-A (Twin Valve Rebound Adjustable) technology: 16 clicks of rebound adjustment that change the damping without affecting the compression setting KW has already tuned for the car.\u003c\/p\u003e\u003cp\u003eKW builds its coilovers by hand at its headquarters in Fichtenberg, Germany. Each one carries an individual serial number, and KW says every damper is dyno tested before it ships. KW develops vehicle-specific damper and spring setups on the Nürburgring Nordschleife and in its own 7-post test center.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eKW kits are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"KW","offers":[{"title":"Default Title","offer_id":52940464455978,"sku":"kw15227505","price":5694.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/9ac02a01e0cebef22a9be2592ae53360.jpg?v=1792001994"},{"product_id":"kw30928009-v5-coilover-kit-for-dodge-viper-dodge-srt-viper","title":"KW V5 Coilover Kit for Dodge Viper \/ Dodge SRT Viper (30928009)","description":"\u003cp\u003eThe KW V5 Coilover Kit for the Dodge Viper \/ Dodge SRT Viper is built on KW's Solid Piston damper technology for sports and super sports cars, with low- and high-speed adjustment of both compression and rebound damping. Part 30928009.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e V5 Coilover Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Anodized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver, Yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e one KW part number; contents follow KW's listing for this application\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Viper \/ Dodge SRT Viper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2015-2017 Dodge Viper (Base, GT, GTC, GTS, SRT); 2013-2014 SRT Viper (Base, GTS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKW part number:\u003c\/strong\u003e 30928009\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e 2013+ Dodge Viper \/ 2013+ Dodge SRT Viper V5 Coilover Kit\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout KW V5\u003c\/h3\u003e\u003cp\u003eV5 uses KW's Solid Piston damper technology with low- and high-speed valve units connected in series. Compression and rebound each adjust in 13 clicks across the low-speed and high-speed ranges. KW describes it as designed for precise, fast damping on sports cars and super sports cars.\u003c\/p\u003e\u003cp\u003eKW builds its coilovers by hand at its headquarters in Fichtenberg, Germany. Each one carries an individual serial number, and KW says every damper is dyno tested before it ships. KW develops vehicle-specific damper and spring setups on the Nürburgring Nordschleife and in its own 7-post test center.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eKW kits are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"KW","offers":[{"title":"Default Title","offer_id":52940464488746,"sku":"kw30928009","price":13794.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/18860345afef8424668f521596a7ed8cL_8457772b-6eda-42db-81b5-3de3bd894516.png?v=1792001995"},{"product_id":"kw30928209-v5-coilover-kit-for-dodge-viper-srt-vx-i-excl-acr-w-hls-2","title":"KW V5 Coilover Kit for Dodge Viper SRT (VX I) excl. ACR w\/ HLS 2 (30928209)","description":"\u003cp\u003eThe KW V5 Coilover Kit for the Dodge Viper SRT (VX I) excl. ACR w\/ HLS 2 is built on KW's Solid Piston damper technology for sports and super sports cars, with low- and high-speed adjustment of both compression and rebound damping. Part 30928209.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e V5 Coilover Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e one KW part number; contents follow KW's listing for this application\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Viper SRT (VX I) excl. ACR w\/ HLS 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2015-2017 Dodge Viper (Base, GT, GTC, GTS, SRT); 2013-2014 SRT Viper (Base, GTS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKW part number:\u003c\/strong\u003e 30928209\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e 13-17 Dodge Viper SRT (VX I) excl. ACR V5 Coilover Kit w\/HLS 2\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout KW V5\u003c\/h3\u003e\u003cp\u003eV5 uses KW's Solid Piston damper technology with low- and high-speed valve units connected in series. Compression and rebound each adjust in 13 clicks across the low-speed and high-speed ranges. KW describes it as designed for precise, fast damping on sports cars and super sports cars.\u003c\/p\u003e\u003cp\u003eKW builds its coilovers by hand at its headquarters in Fichtenberg, Germany. Each one carries an individual serial number, and KW says every damper is dyno tested before it ships. KW develops vehicle-specific damper and spring setups on the Nürburgring Nordschleife and in its own 7-post test center.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eKW kits are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"KW","offers":[{"title":"Default Title","offer_id":52940464587050,"sku":"kw30928209","price":17954.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/235eaddcf3a2af17a164fdb3a2cdb5beL.jpg?v=1792001995"},{"product_id":"kw35227505-v3-coilover-kit-for-dodge-viper-srt-10","title":"KW V3 Coilover Kit for Dodge Viper SRT-10 (35227505)","description":"\u003cp\u003eThe KW V3 Coilover Kit for the Dodge Viper SRT-10 is a coilover with separately adjustable rebound and compression damping and stainless-steel INOX-LINE struts, aimed at performance drivers who want to tune the setup to the car and tires. Part 35227505.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e V3 Coilover Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless-steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e INOX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver, Yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e one KW part number; contents follow KW's listing for this application\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Viper SRT-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2003-2006 Dodge Viper (SRT-10)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKW part number:\u003c\/strong\u003e 35227505\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e Coilover Kit V3 03-07 Dodge Viper SRT-10\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout KW V3\u003c\/h3\u003e\u003cp\u003eV3 combines KW's TVR-A rebound and TVC-A compression valves, so rebound and compression are adjusted separately. That lets you add compression damping for more grip without changing the rebound setting that is matched to the spring rate.\u003c\/p\u003e\u003cp\u003eKW builds its coilovers by hand at its headquarters in Fichtenberg, Germany. Each one carries an individual serial number, and KW says every damper is dyno tested before it ships. KW develops vehicle-specific damper and spring setups on the Nürburgring Nordschleife and in its own 7-post test center.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eKW kits are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"KW","offers":[{"title":"Default Title","offer_id":52940464652586,"sku":"kw35227505","price":7054.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/d25d483d933dc139000e5808a7f6c3b1_5210b87f-61b2-4922-affe-08c4d72a4aa1.png?v=1792001997"},{"product_id":"kw35227705-clubsport-coilover-kit-for-dodge-viper-zb-srt-10-w-rear-fork-mounts-stainless-steel-shock","title":"KW Clubsport Coilover Kit for Dodge Viper (ZB) SRT-10 w\/ rear fork mounts stainless steel shock bodies (35227705)","description":"\u003cp\u003eThe KW Clubsport Coilover Kit for the Dodge Viper (ZB) SRT-10 w\/ rear fork mounts stainless steel shock bodies is a track-focused coilover for cars used on the street and at events, with separately adjustable damping and stiffer race-style springs. It is built for sticky-tire setups, HPDE, time attack and club racing. Part 35227705.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Clubsport Coilover Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront lowering:\u003c\/strong\u003e 0.8–1.5 in (20–40 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear lowering:\u003c\/strong\u003e 0.8–1.5 in (20–40 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless-steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e INOX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver, Yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e one KW part number; contents follow KW's listing for this application\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Viper (ZB) SRT-10 w\/ rear fork mounts stainless steel shock bodies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2003-2006 Dodge Viper (SRT-10)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKW part number:\u003c\/strong\u003e 35227705\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e Clubsport Kit Dodge Viper (ZB) SRT-10w\/ rear fork mounts stainless steel shock bodies\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout KW Clubsport\u003c\/h3\u003e\u003cp\u003eClubsport builds on KW's V3 damper technology (TVR-A rebound and TVC-A compression, adjusted separately) and adds solid aluminum unibal top mounts, which cut deflection and provide camber adjustability where the application allows. KW pairs it with linear, track-focused race springs and designed the setup at the Nürburgring Nordschleife.\u003c\/p\u003e\u003cp\u003eKW builds its coilovers by hand at its headquarters in Fichtenberg, Germany. Each one carries an individual serial number, and KW says every damper is dyno tested before it ships. KW develops vehicle-specific damper and spring setups on the Nürburgring Nordschleife and in its own 7-post test center.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eKW kits are special-order items from our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"KW","offers":[{"title":"Default Title","offer_id":52940467142954,"sku":"kw35227705","price":7994.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/cc5d34dc4f7fba19bd569ccb43a758b8.jpg?v=1792002047"},{"product_id":"eib2871-312-16mm-rear-anti-roll-bar-kit-for-dodge-charger-challenger-lx","title":"Eibach 16mm Rear Anti-Roll Bar Kit for Dodge Charger \/ Challenger (LX) (2871.312)","description":"\u003cp\u003eThe Eibach 16mm Rear Anti-Roll Bar Kit for the Dodge Charger \/ Challenger (LX) is a rear sway bar (anti-roll bar) upgrade. A stiffer bar resists body roll in corners. Bushings are included. Part 2871.312.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Anti-Roll-Kit (sway bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e Rear sway bar only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear bar:\u003c\/strong\u003e Solid, non-adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar size:\u003c\/strong\u003e 16 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Powder Coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar color:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushings included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Charger \/ Challenger (LX)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2005-2007 Chrysler 300 Base; 2005-2010 Chrysler 300 C; 2005-2010 Chrysler 300 C SRT8; 2005-2010 Chrysler 300 Limited; 2008-2009 Chrysler 300 LX; 2010 Chrysler 300 S; 2009 Chrysler 300 Signature Series; 2010 Chrysler 300 Touring; plus 14 more on file\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEibach part number:\u003c\/strong\u003e 2871.312\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e 16mm Anti-Roll Bar Kit Rear Only for Chrysler 300\/300C \/ Dodge Charger \/ Dodge Magnum\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Eibach Anti-Roll-Kit\u003c\/h3\u003e\u003cp\u003eAnti-Roll-Kit is Eibach's sway bar (anti-roll bar) line. A stiffer bar resists body roll in corners, and bars listed as adjustable let you change how stiff the bar acts.\u003c\/p\u003e\u003cp\u003eEibach was founded in 1951 by Heinrich Eibach and is headquartered in Finnentrop, Germany. Its U.S. subsidiary, Eibach Springs, Inc., was founded in 1987.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEibach parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. We can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52944395043114,"sku":"eib2871.312","price":269.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/group-49906704-c975-4314-b46b-875c5a9a5e87-800_0d3a3516-2745-4f92-8afe-3b1e30f39999.jpg?v=1792031334"},{"product_id":"eib4-10528-sportline-lowering-springs-for-2011-2013-dodge-charger-challenger-lx","title":"Eibach Sportline Lowering Springs for 2011–2013 Dodge Charger \/ Challenger (LX) (4.10528)","description":"\u003cp\u003eThe Eibach Sportline lowering springs for the Dodge Charger \/ Challenger (LX) are Eibach's sportier spring set, aimed at a lower stance and firmer handling than Pro-Kit. Eibach lists the drop as about 1.6–1.7 in at the front and 1.7–1.8 in at the rear. Part 4.10528.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Sportline Lowering Springs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront lowering:\u003c\/strong\u003e 1.6–1.7 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear lowering:\u003c\/strong\u003e 1.7–1.8 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e Set of 4 springs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring color:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring material:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Charger \/ Challenger (LX)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2011-2014 Chrysler 300 Base; 2013-2017 Chrysler 300 C; 2011-2020 Chrysler 300 C; 2013 Chrysler 300 C; 2013-2014 Chrysler 300 C Luxury; 2012-2014 Chrysler 300 C Luxury; 2015-2017 Chrysler 300 C Platinum; plus 3 more on file\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEibach part number:\u003c\/strong\u003e 4.10528\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e Sportline Kit for 11-13 Chrysler 300\/300C \/ 11-13 Dodge Charger\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Eibach Sportline\u003c\/h3\u003e\u003cp\u003eSportline is Eibach's sportier spring line. Eibach positions it as a lower, firmer option than Pro-Kit for drivers who put handling ahead of ride comfort.\u003c\/p\u003e\u003cp\u003eEibach was founded in 1951 by Heinrich Eibach and is headquartered in Finnentrop, Germany. Its U.S. subsidiary, Eibach Springs, Inc., was founded in 1987.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEibach parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52944404578602,"sku":"eib4.10528","price":395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/group-328bafce-63fe-498b-83a8-acd06c5c39c1-800_0da1e8ec-078c-4cf5-97cd-f22b31978ab0.jpg?v=1792032310"},{"product_id":"eibe32-27-004-02-22-drag-launch-kit-competition-springs-for-2015-2020-dodge-challenger-srt-hellcat","title":"Eibach Drag-Launch Kit (Competition Springs) for 2015–2020 Dodge Challenger SRT Hellcat (E32-27-004-02-22)","description":"\u003cp\u003eThis is the Eibach Drag-Launch Kit for the Dodge Challenger SRT Hellcat, a spring set for drag-strip use. Part E32-27-004-02-22.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Drag-Launch Kit (Competition Springs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring color:\u003c\/strong\u003e Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring material:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Powder Coated\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Challenger SRT Hellcat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2013-2017 Chrysler 300 C; 2005-2020 Chrysler 300 C; 2013 Chrysler 300 C; 2022-2023 Chrysler 300 S; 2016 Dodge Challenger 392 Hemi Scat Pack Shaker; 2023 Dodge Challenger GT; 2022 Dodge Challenger R\/T; plus 5 more on file\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEibach part number:\u003c\/strong\u003e E32-27-004-02-22\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e Drag Launch Kit (Competition Springs) for 2015-2020 Dodge Challenger SRT Hellcat\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Eibach Drag-Launch\u003c\/h3\u003e\u003cp\u003eDrag-Launch is Eibach's spring kit for drag-strip use rather than daily driving. The kit details above come from our distributor's listing for this part number.\u003c\/p\u003e\u003cp\u003eEibach was founded in 1951 by Heinrich Eibach and is headquartered in Finnentrop, Germany. Its U.S. subsidiary, Eibach Springs, Inc., was founded in 1987.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEibach parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52944414605610,"sku":"eibE32-27-004-02-22","price":395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/f27bf87431d0d09ae15b86ddc17dbc67L.jpg?v=1792032554"},{"product_id":"eibe10-27-004-03-22-special-edition-pro-kit-lowering-springs-for-2018-dodge-challenger-srt-demon","title":"Eibach Special Edition Pro-Kit Lowering Springs for 2018 Dodge Challenger SRT Demon (E10-27-004-03-22)","description":"\u003cp\u003eThe Eibach Pro-Kit lowering springs for the Dodge Challenger SRT Demon are Eibach's street-oriented spring set for a lower stance and sharper handling. It is listed by Eibach as a special-edition kit. Part E10-27-004-03-22.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Special Edition Pro-Kit Lowering Springs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring material:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring ends:\u003c\/strong\u003e OEM-style at both ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Challenger SRT Demon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2018 Dodge Challenger SRT Demon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEibach part number:\u003c\/strong\u003e E10-27-004-03-22\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e Special Edition Pro-Kit for 2018 Dodge Challenger SRT Demon\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Eibach Pro-Kit\u003c\/h3\u003e\u003cp\u003ePro-Kit is Eibach's street-oriented lowering spring line. Eibach positions it as a way to lower the car and sharpen handling while keeping ride quality close to stock.\u003c\/p\u003e\u003cp\u003eEibach was founded in 1951 by Heinrich Eibach and is headquartered in Finnentrop, Germany. Its U.S. subsidiary, Eibach Springs, Inc., was founded in 1987.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEibach parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52944414638378,"sku":"eibE10-27-004-03-22","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/ae29301323947d726f20928169771e65L.jpg?v=1792031437"},{"product_id":"eib2895-140-pro-kit-lowering-springs-for-2011-2012-dodge-challenger-se-3-6l-v6","title":"Eibach Pro-Kit Lowering Springs for 2011–2012 Dodge Challenger SE (3.6L V6) (2895.140)","description":"\u003cp\u003eThe Eibach Pro-Kit lowering springs for the Dodge Challenger SE (3.6L V6) are Eibach's street-oriented spring set for a lower stance and sharper handling. Eibach lists the drop as about 0.6–1.7 in at the front and 1–1.7 in at the rear. Part 2895.140.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Pro-Kit Lowering Springs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront lowering:\u003c\/strong\u003e 0.6–1.7 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear lowering:\u003c\/strong\u003e 1–1.7 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e Set of 4 springs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring material:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring ends:\u003c\/strong\u003e OEM-style at both ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Challenger SE (3.6L V6)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2012-2014 Chrysler 300 SRT8; 2016 Dodge Challenger 392 Hemi Scat Pack Shaker; 2017-2023 Dodge Challenger GT; 2009-2010 Dodge Challenger R\/T; 2015-2021 Dodge Challenger R\/T; 2017-2019 Dodge Challenger R\/T 392; 2015-2016 Dodge Challenger R\/T Plus; 2016 Dodge Challenger R\/T Plus Shaker; plus 14 more on file\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEibach part number:\u003c\/strong\u003e 2895.140\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e Pro-Kit for 11-12 Dodge Challenger SE\/LC 3.6L V6\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Eibach Pro-Kit\u003c\/h3\u003e\u003cp\u003ePro-Kit is Eibach's street-oriented lowering spring line. Eibach positions it as a way to lower the car and sharpen handling while keeping ride quality close to stock.\u003c\/p\u003e\u003cp\u003eEibach was founded in 1951 by Heinrich Eibach and is headquartered in Finnentrop, Germany. Its U.S. subsidiary, Eibach Springs, Inc., was founded in 1987.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEibach parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52944415359274,"sku":"eib2895.140","price":395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/56219020-5c04-4552-b2c4-e40ab5faaf44-800.jpg?v=1792031439"},{"product_id":"eib28110-840-pro-damper-kit-set-of-4-dampers-for-2011-2013-dodge-charger-challenger-lx","title":"Eibach Pro-Damper Kit (Set of 4 Dampers) for 2011–2013 Dodge Charger \/ Challenger (LX) (28110.840)","description":"\u003cp\u003eThe Eibach Pro-Damper Kit for the Dodge Charger \/ Challenger (LX) is a set of four dampers (shocks) from Eibach. The part listing shows them as non-adjustable with OEM-style upper and lower mounts. Mounting hardware is not included. Part 28110.840.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Pro-Damper Kit (Set of 4 Dampers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e Set of four dampers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpper mount:\u003c\/strong\u003e OEM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower mount:\u003c\/strong\u003e OEM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting hardware included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Charger \/ Challenger (LX)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2011-2014 Chrysler 300 Base; 2013-2017 Chrysler 300 C; 2011-2020 Chrysler 300 C; 2013 Chrysler 300 C; 2013-2014 Chrysler 300 C Luxury; 2012-2014 Chrysler 300 C Luxury; 2015-2017 Chrysler 300 C Platinum; plus 11 more on file\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEibach part number:\u003c\/strong\u003e 28110.840\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e Pro-Damper Kit for 11-13 Chrysler 300\/300C \/ 11-13 Dodge Challenger\/Charger\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Eibach Pro-Damper\u003c\/h3\u003e\u003cp\u003ePro-Damper is Eibach's damper (shock) line. This listing is the set of four dampers described in the part listing.\u003c\/p\u003e\u003cp\u003eEibach was founded in 1951 by Heinrich Eibach and is headquartered in Finnentrop, Germany. Its U.S. subsidiary, Eibach Springs, Inc., was founded in 1987.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEibach parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52944416407850,"sku":"eib28110.840","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/group-418add41-be43-4101-9f92-225851fde1b9-800.jpg?v=1792032311"},{"product_id":"eib2895-312-19mm-rear-anti-roll-bar-kit-for-2008-2013-dodge-charger-challenger-lx","title":"Eibach 19mm Rear Anti-Roll Bar Kit for 2008–2013 Dodge Charger \/ Challenger (LX) (2895.312)","description":"\u003cp\u003eThe Eibach 19mm Rear Anti-Roll Bar Kit for the Dodge Charger \/ Challenger (LX) is a rear sway bar (anti-roll bar) upgrade. A stiffer bar resists body roll in corners. Bushings are included. Part 2895.312.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Anti-Roll-Kit (sway bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e Rear sway bar only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear bar:\u003c\/strong\u003e Tubular, 2-way adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar size:\u003c\/strong\u003e 19 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Powder Coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar color:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushings included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Charger \/ Challenger (LX)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2011-2014 Chrysler 300 Base; 2013-2017 Chrysler 300 C; 2011-2012 Chrysler 300 C; 2014-2020 Chrysler 300 C; 2013 Chrysler 300 C; 2013-2014 Chrysler 300 C Luxury; 2015-2017 Chrysler 300 C Platinum; 2011-2012 Chrysler 300 Limited; plus 24 more on file\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEibach part number:\u003c\/strong\u003e 2895.312\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e Rear Anti-Roll-Kit for 11-13 Chrysler 300\/300C \/ 08-13 Dodge Challenger\/11-13 Charger\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Eibach Anti-Roll-Kit\u003c\/h3\u003e\u003cp\u003eAnti-Roll-Kit is Eibach's sway bar (anti-roll bar) line. A stiffer bar resists body roll in corners, and bars listed as adjustable let you change how stiff the bar acts.\u003c\/p\u003e\u003cp\u003eEibach was founded in 1951 by Heinrich Eibach and is headquartered in Finnentrop, Germany. Its U.S. subsidiary, Eibach Springs, Inc., was founded in 1987.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEibach parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. We can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52944416833834,"sku":"eib2895.312","price":269.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/group-49906704-c975-4314-b46b-875c5a9a5e87-800_b777a539-fa9f-4bba-9136-8a5bea5040e0.jpg?v=1792031449"},{"product_id":"eib28111-880-pro-plus-kit-springs-sway-bars-for-dodge-charger-challenger-lx","title":"Eibach Pro-Plus Kit (Springs + Sway Bars) for Dodge Charger \/ Challenger (LX) (28111.880)","description":"\u003cp\u003eThe Eibach Pro-Plus Kit for the Dodge Charger \/ Challenger (LX) puts Eibach Pro-Kit lowering springs and Eibach sway bars in one kit. Eibach lists the drop as about 0.5–1.4 in at the front and 1–1.7 in at the rear. Part 28111.880.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Pro-Plus Kit (Springs + Sway Bars)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront lowering:\u003c\/strong\u003e 0.5–1.4 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear lowering:\u003c\/strong\u003e 1–1.7 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e Eibach Pro-Kit springs and Eibach sway bars\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring material:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSway bar color:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushing color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Charger \/ Challenger (LX)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2011-2020 Dodge Challenger R\/T; 2011-2014 Dodge Challenger SRT8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEibach part number:\u003c\/strong\u003e 28111.880\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing (partial; the source text is cut off):\u003c\/strong\u003e Pro-Plus Kit for 11 Dodge Challenger SRT-8 6.4L V8 Hemi\/11-13 Challenger R\/T LC 5.7L V8 Hemi…\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Eibach Pro-Plus\u003c\/h3\u003e\u003cp\u003ePro-Plus pairs Pro-Kit lowering springs with Eibach Anti-Roll sway bars, so you can lower the car and add roll control from one part number.\u003c\/p\u003e\u003cp\u003eEibach was founded in 1951 by Heinrich Eibach and is headquartered in Finnentrop, Germany. Its U.S. subsidiary, Eibach Springs, Inc., was founded in 1987.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEibach parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52944416866602,"sku":"eib28111.880","price":963.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/c6cf893a-1b1a-42b4-9fda-ae2ccc0f92ca-800_320996e7-f1d5-4ed2-9d27-5309acdbeb29.jpg?v=1792031449"},{"product_id":"eib5-66045k-pro-alignment-front-camber-caster-arm-kit-for-2009-2014-dodge-charger-challenger-lx","title":"Eibach Pro-Alignment Front Camber\/Caster Arm Kit for 2009–2014 Dodge Charger \/ Challenger (LX) (5.66045K)","description":"\u003cp\u003eThe Eibach Pro-Alignment Front Camber\/Caster Arm Kit for the Dodge Charger \/ Challenger (LX) adds front camber and caster adjustment with adjustable control arms. Part 5.66045K.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Pro-Alignment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment:\u003c\/strong\u003e ±2.0 camber and ±1.5 caster\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushings:\u003c\/strong\u003e Black rubber\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Charger \/ Challenger (LX)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2011-2014 Chrysler 300 Base; 2013-2017 Chrysler 300 C; 2009-2012 Chrysler 300 C; 2014-2020 Chrysler 300 C; 2013 Chrysler 300 C; 2013-2014 Chrysler 300 C Luxury; 2015-2017 Chrysler 300 C Platinum; 2009-2010 Chrysler 300 C SRT8; plus 10 more on file\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEibach part number:\u003c\/strong\u003e 5.66045K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e Pro-Alignment Camber Arm Kit for 09-14 Chrysler 300 2WD\/09-14 Dodge Challenger\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Eibach Pro-Alignment\u003c\/h3\u003e\u003cp\u003ePro-Alignment is Eibach's line of alignment hardware: parts that add camber, toe or caster adjustment beyond what the factory hardware allows.\u003c\/p\u003e\u003cp\u003eEibach was founded in 1951 by Heinrich Eibach and is headquartered in Finnentrop, Germany. Its U.S. subsidiary, Eibach Springs, Inc., was founded in 1987.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEibach parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. Alignment parts only pay off with a proper alignment, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52944417259818,"sku":"eib5.66045K","price":586.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/group-3a51c8c4-dbbf-4cd6-b3eb-c4aaca10f29c-800_084e1b5f-a5da-4435-8666-c57ee0940a07.jpg?v=1792031452"},{"product_id":"eibe43-27-008-02-22-pro-plus-kit-springs-sway-bars-for-2015-2020-dodge-charger-scat-pack-srt-hellcat","title":"Eibach Pro-Plus Kit (Springs + Sway Bars) for 2015–2020 Dodge Charger Scat Pack \/ SRT Hellcat (E43-27-008-02-22)","description":"\u003cp\u003eThe Eibach Pro-Plus Kit for the Dodge Charger Scat Pack \/ SRT Hellcat puts Eibach Pro-Kit lowering springs and Eibach sway bars in one kit. Part E43-27-008-02-22.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Pro-Plus Kit (Springs + Sway Bars)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e Eibach Pro-Kit springs and Eibach sway bars\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring material:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSway bar color:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushing color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Charger Scat Pack \/ SRT Hellcat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2015 Dodge Challenger Scat Pack; 2015-2020 Dodge Challenger SRT Hellcat; 2015-2018 Dodge Charger R\/T Scat Pack; 2022 Dodge Charger Scat Pack; 2020-2023 Dodge Charger Scat Pack; 2015-2020 Dodge Charger SRT Hellcat; 2023 Dodge Charger SRT Hellcat Widebody\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEibach part number:\u003c\/strong\u003e E43-27-008-02-22\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e Pro Plus Kit for 15-20 Dodge Charger Scat Pack \/ SRT Hellcat\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Eibach Pro-Plus\u003c\/h3\u003e\u003cp\u003ePro-Plus pairs Pro-Kit lowering springs with Eibach Anti-Roll sway bars, so you can lower the car and add roll control from one part number.\u003c\/p\u003e\u003cp\u003eEibach was founded in 1951 by Heinrich Eibach and is headquartered in Finnentrop, Germany. Its U.S. subsidiary, Eibach Springs, Inc., was founded in 1987.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEibach parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52944425419050,"sku":"eibE43-27-008-02-22","price":963.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/137489f93c83d022f082fa18ca5fc57dL_7c42db30-efd1-4953-93ee-d53dab49d336.jpg?v=1792031498"},{"product_id":"eib4-9528-sportline-lowering-springs-for-2008-2021-dodge-charger-challenger-lx","title":"Eibach Sportline Lowering Springs for 2008–2021 Dodge Charger \/ Challenger (LX) (4.9528)","description":"\u003cp\u003eThe Eibach Sportline lowering springs for the Dodge Charger \/ Challenger (LX) are Eibach's sportier spring set, aimed at a lower stance and firmer handling than Pro-Kit. Eibach lists the drop as about 1.9–2 in at the front and 2–2.1 in at the rear. Part 4.9528.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Sportline Lowering Springs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront lowering:\u003c\/strong\u003e 1.9–2 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear lowering:\u003c\/strong\u003e 2–2.1 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e Set of 4 springs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring color:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring material:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring ends:\u003c\/strong\u003e OEM-style at both ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Charger \/ Challenger (LX)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2016 Dodge Challenger 392 Hemi Scat Pack Shaker; 2017-2023 Dodge Challenger GT; 2022 Dodge Challenger R\/T; 2009-2023 Dodge Challenger R\/T; 2017-2019 Dodge Challenger R\/T 392; 2012 Dodge Challenger R\/T Classic; 2015-2016 Dodge Challenger R\/T Plus; 2016 Dodge Challenger R\/T Plus Shaker; plus 8 more on file\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEibach part number:\u003c\/strong\u003e 4.9528\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e Sportline Kit for 08-21 Dodge Challenger\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Eibach Sportline\u003c\/h3\u003e\u003cp\u003eSportline is Eibach's sportier spring line. Eibach positions it as a lower, firmer option than Pro-Kit for drivers who put handling ahead of ride comfort.\u003c\/p\u003e\u003cp\u003eEibach was founded in 1951 by Heinrich Eibach and is headquartered in Finnentrop, Germany. Its U.S. subsidiary, Eibach Springs, Inc., was founded in 1987.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEibach parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52944426500394,"sku":"eib4.9528","price":395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/group-328bafce-63fe-498b-83a8-acd06c5c39c1-800_973dcceb-a8a4-4e80-81ff-94d444a4aeb8.jpg?v=1792031504"},{"product_id":"eib2895-320-35mm-front-19mm-rear-anti-roll-bar-kit-for-2008-2010-dodge-charger-challenger-lx","title":"Eibach 35mm Front \u0026 19mm Rear Anti-Roll Bar Kit for 2008–2010 Dodge Charger \/ Challenger (LX) (2895.320)","description":"\u003cp\u003eThe Eibach 35mm Front \u0026amp; 19mm Rear Anti-Roll Bar Kit for the Dodge Charger \/ Challenger (LX) is a front and rear sway bar (anti-roll bar) upgrade. A stiffer bar resists body roll in corners. Bushings are included. Part 2895.320.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Anti-Roll-Kit (sway bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e Front \u0026amp; Rear sway bars\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront bar:\u003c\/strong\u003e Tubular, 2-way adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear bar:\u003c\/strong\u003e Tubular, 2-way adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar size:\u003c\/strong\u003e 35 mm \/ 19 mm (front \/ rear)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Powder Coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar color:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushings included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Charger \/ Challenger (LX)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2011-2014 Chrysler 300 Base; 2013-2017 Chrysler 300 C; 2011-2012 Chrysler 300 C; 2014-2020 Chrysler 300 C; 2013 Chrysler 300 C; 2013-2014 Chrysler 300 C Luxury; 2015-2017 Chrysler 300 C Platinum; 2011-2012 Chrysler 300 Limited; plus 24 more on file\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEibach part number:\u003c\/strong\u003e 2895.320\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e Anti-Roll Kit (Front \u0026amp; Rear) 08-10 Dodge Challenger\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Eibach Anti-Roll-Kit\u003c\/h3\u003e\u003cp\u003eAnti-Roll-Kit is Eibach's sway bar (anti-roll bar) line. A stiffer bar resists body roll in corners, and bars listed as adjustable let you change how stiff the bar acts.\u003c\/p\u003e\u003cp\u003eEibach was founded in 1951 by Heinrich Eibach and is headquartered in Finnentrop, Germany. Its U.S. subsidiary, Eibach Springs, Inc., was founded in 1987.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEibach parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. We can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52944426533162,"sku":"eib2895.320","price":568.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/ae5d7207-994d-4e44-b83c-5b11c6335e85-800.jpg?v=1792031505"},{"product_id":"eib5-66050k-pro-alignment-rear-camber-bushing-kit-for-2005-2011-dodge-charger-challenger-lx","title":"Eibach Pro-Alignment Rear Camber Bushing Kit for 2005–2011 Dodge Charger \/ Challenger (LX) (5.66050K)","description":"\u003cp\u003eThe Eibach Pro-Alignment Rear Camber Bushing Kit for the Dodge Charger \/ Challenger (LX) is a rear camber bushing kit. Part 5.66050K.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Pro-Alignment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushing material:\u003c\/strong\u003e Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit:\u003c\/strong\u003e Vehicle-specific\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Charger \/ Challenger (LX)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2005-2007 Chrysler 300 Base; 2011-2014 Chrysler 300 Base; 2013-2017 Chrysler 300 C; 2005-2012 Chrysler 300 C; 2014-2020 Chrysler 300 C; 2013 Chrysler 300 C; 2013-2014 Chrysler 300 C Luxury; 2015-2017 Chrysler 300 C Platinum; plus 19 more on file\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEibach part number:\u003c\/strong\u003e 5.66050K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing:\u003c\/strong\u003e Pro-Alignment Camber Rear Kit for 05-10 Chrysler 300\/300C 2WD \/ 09-11 Dodge Challenger\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Eibach Pro-Alignment\u003c\/h3\u003e\u003cp\u003ePro-Alignment is Eibach's line of alignment hardware: parts that add camber, toe or caster adjustment beyond what the factory hardware allows.\u003c\/p\u003e\u003cp\u003eEibach was founded in 1951 by Heinrich Eibach and is headquartered in Finnentrop, Germany. Its U.S. subsidiary, Eibach Springs, Inc., was founded in 1987.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEibach parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. Alignment parts only pay off with a proper alignment, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52944427942186,"sku":"eib5.66050K","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/group-3a51c8c4-dbbf-4cd6-b3eb-c4aaca10f29c-800_7c8a3d92-5cb8-4f14-87c4-c51714d555eb.jpg?v=1792031514"},{"product_id":"eib2873-320-30mm-front-16mm-rear-anti-roll-bar-kit-for-dodge-charger-challenger-lx","title":"Eibach 30mm Front \u0026 16mm Rear Anti-Roll Bar Kit for Dodge Charger \/ Challenger (LX) (2873.320)","description":"\u003cp\u003eThe Eibach 30mm Front \u0026amp; 16mm Rear Anti-Roll Bar Kit for the Dodge Charger \/ Challenger (LX) is a front and rear sway bar (anti-roll bar) upgrade. A stiffer bar resists body roll in corners. Bushings are included. Part 2873.320.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Anti-Roll-Kit (sway bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e Front \u0026amp; Rear sway bars\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront bar:\u003c\/strong\u003e Solid, non-adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear bar:\u003c\/strong\u003e Solid, non-adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar size:\u003c\/strong\u003e 30 mm \/ 16 mm (front \/ rear)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Powder Coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar color:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushings included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Charger \/ Challenger (LX)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2005-2007 Chrysler 300 Base; 2005-2010 Chrysler 300 C; 2005-2010 Chrysler 300 C SRT8; 2005-2010 Chrysler 300 Limited; 2008-2009 Chrysler 300 LX; 2010 Chrysler 300 S; 2009 Chrysler 300 Signature Series; 2010 Chrysler 300 Touring; plus 7 more on file\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEibach part number:\u003c\/strong\u003e 2873.320\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing (partial; the source text is cut off):\u003c\/strong\u003e Anti-Roll Kit for 05-10 Chrysler 300\/300C \/ 06-10 Dodge Charger \/ 05-08 Magnum (Front \u0026amp; Rear…\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Eibach Anti-Roll-Kit\u003c\/h3\u003e\u003cp\u003eAnti-Roll-Kit is Eibach's sway bar (anti-roll bar) line. A stiffer bar resists body roll in corners, and bars listed as adjustable let you change how stiff the bar acts.\u003c\/p\u003e\u003cp\u003eEibach was founded in 1951 by Heinrich Eibach and is headquartered in Finnentrop, Germany. Its U.S. subsidiary, Eibach Springs, Inc., was founded in 1987.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEibach parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. We can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52944433512746,"sku":"eib2873.320","price":568.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/group-49906704-c975-4314-b46b-875c5a9a5e87-800_6b8bada1-9c0e-4744-a62c-893a0ebd4578.jpg?v=1792031569"},{"product_id":"eib2895-880-pro-plus-kit-springs-sway-bars-for-dodge-charger-challenger-lx","title":"Eibach Pro-Plus Kit (Springs + Sway Bars) for Dodge Charger \/ Challenger (LX) (2895.880)","description":"\u003cp\u003eThe Eibach Pro-Plus Kit for the Dodge Charger \/ Challenger (LX) puts Eibach Pro-Kit lowering springs and Eibach sway bars in one kit. Eibach lists the drop as about 0.6–1.7 in at the front and 0.8–1.7 in at the rear. Part 2895.880.\u003c\/p\u003e\u003ch3\u003eKit details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Pro-Plus Kit (Springs + Sway Bars)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront lowering:\u003c\/strong\u003e 0.6–1.7 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear lowering:\u003c\/strong\u003e 0.8–1.7 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e Eibach Pro-Kit springs and Eibach sway bars\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring material:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSway bar color:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushing color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Dodge Charger \/ Challenger (LX)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears and trims on file:\u003c\/strong\u003e 2012-2014 Chrysler 300 SRT8; 2017-2020 Dodge Challenger GT; 2009-2010 Dodge Challenger R\/T; 2014 Dodge Challenger Rallye Redline; 2009-2010 Dodge Challenger SE; 2011 Dodge Challenger SE; 2008-2010 Dodge Challenger SRT8; 2012-2020 Dodge Challenger SXT; plus 2 more on file\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEibach part number:\u003c\/strong\u003e 2895.880\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication listing (partial; the source text is cut off):\u003c\/strong\u003e Pro-Plus Kit for 08-10 Dodge Challenger SRT-8 \/ 09-10 Challenger SE LC V6\/R\/T LC 5.7L Hemi V8…\u003c\/li\u003e\n\u003cli\u003eSuspension packages vary within a model line (electronic dampers, lift systems, engine and drive type). Compare the application above with your car before ordering. Not sure? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e and we will check it against your VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Eibach Pro-Plus\u003c\/h3\u003e\u003cp\u003ePro-Plus pairs Pro-Kit lowering springs with Eibach Anti-Roll sway bars, so you can lower the car and add roll control from one part number.\u003c\/p\u003e\u003cp\u003eEibach was founded in 1951 by Heinrich Eibach and is headquartered in Finnentrop, Germany. Its U.S. subsidiary, Eibach Springs, Inc., was founded in 1987.\u003c\/p\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eEibach parts are supplied through our distributor. We confirm availability and lead time with you after you order.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey. An alignment is recommended after any ride-height change, and we can \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car, and \u003ca href=\"\/pages\/track-prep-maintenance-nj\"\u003eprep track cars\u003c\/a\u003e. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about installation and fitment\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52944433611050,"sku":"eib2895.880","price":963.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/c6cf893a-1b1a-42b4-9fda-ae2ccc0f92ca-800_dd1aef9f-7dd7-47e7-b7f6-47daf825bab5.jpg?v=1792031572"}],"url":"https:\/\/team-anbd.com\/collections\/dodge.oembed?page=2","provider":"Team ANBD","version":"1.0","type":"link"}