{"title":"Chevrolet Corvette (C5 \/ C6) Performance Parts","description":"\u003cp\u003eParts confirmed to fit the C5 and C6 Chevrolet Corvette — Z51, Z06, Grand Sport and the C6 ZR1 including the Carbon Edition.\u003c\/p\u003e\u003cp\u003eMostly brakes: two-piece floating rotors and replacement rings front and rear and titanium pad shields, with the Z51 applications spanning both generations. For the C6 there is also a performance radiator and carbon aero mirrors, plus a front sway bar link.\u003c\/p\u003e\u003cp\u003eThese are the Corvettes that get bought specifically to be tracked, and the factory single-piece discs are the first thing to give up. Replaceable rings keep a car that runs twenty weekends a year affordable to own. Tell us the year and trim and we will confirm fitment. Installation available at our shop in Andover, NJ.\u003c\/p\u003e","products":[{"product_id":"carbon-gtlm-aero-mirrors-chevrolet-corvette-c6-2005-2013","title":"Carbon GTLM Aero Mirrors - Chevrolet Corvette C6 (2005-2013)","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eInspired by Le Mans GT racecars, the EVS Tuning GTLM Mirrors were developed around two goals: aerodynamic efficiency and weight saving.\u003c\/p\u003e\n\u003cp\u003eDesigned and engineered in-house by EVS Tuning. The arms are cast magnesium and the housings are finished in dry carbon, so the whole assembly weighs considerably less than the factory mirrors while presenting a much smaller frontal area to the airflow.\u003c\/p\u003e\n\u003cp\u003eThe glass is anti-glare and offers full swivel adjustability, so they remain genuinely usable on the road rather than being a track-only compromise.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoose your finish:\u003c\/strong\u003e black or silver carbon.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGT racing derived profile for reduced drag\u003c\/li\u003e\n\u003cli\u003eSignificantly lighter than the OEM mirror assemblies\u003c\/li\u003e\n\u003cli\u003eCast magnesium arms\u003c\/li\u003e\n\u003cli\u003eDry carbon housings\u003c\/li\u003e\n\u003cli\u003eAnti-glare glass with full swivel adjustability\u003c\/li\u003e\n\u003cli\u003eDesigned and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCast magnesium mirror arms\u003c\/li\u003e\n\u003cli\u003eDry carbon fiber housings, black or silver finish\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart Numbers:\u003c\/strong\u003e EVS-C6-GTLM-01B (black) \/ EVS-C6-GTLM-01S (silver)\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits 2005–2013 Chevrolet Corvette (C6).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e Cancer and Reproductive Harm — \u003ca href=\"https:\/\/www.p65warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"EVS Tuning","offers":[{"title":"Black","offer_id":52561636229418,"sku":"EVS-C6-GTLM-01B","price":995.0,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":52561636262186,"sku":"EVS-C6-GTLM-01S","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/EVS-C6-GTLM-01B_2_640x640_b022a955-5cd2-4b0a-9a6f-05e0e9e29cef.jpg?v=1789049286"},{"product_id":"csf-high-performance-radiator-chevrolet-corvette-c6-2005-2013","title":"CSF High Performance Radiator - Chevrolet Corvette C6 (2005-2013)","description":"\u003ch3\u003eCSF High Performance All-Aluminum Radiator — Chevrolet Corvette C6\u003c\/h3\u003e\n\u003cp\u003eAll-aluminum performance radiator for the 2005–2013 Corvette C6.\u003c\/p\u003e\n\u003ch3\u003e⚠ Fitment Exclusion\u003c\/h3\u003e\n\u003cp\u003eDoes \u003cstrong\u003enot\u003c\/strong\u003e fit the 2011–2013 Z06, ZR1 or 427 models — those use a different cooling package. Check your model before ordering.\u003c\/p\u003e","brand":"CSF","offers":[{"title":"Default Title","offer_id":52607791005994,"sku":"csf7223","price":749.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/a5867638c06923b424b390aa87e57e3aL.jpg?v=1789448531"},{"product_id":"whiteline-front-sway-bar-link-assembly-nissan-350z","title":"Whiteline Front Sway Bar Link Assembly - Nissan 350Z \/ Chevrolet Corvette","description":"\u003ch3\u003eWhiteline Front Adjustable Sway Bar Link Assembly\u003c\/h3\u003e\n\u003cp\u003eHeavy-duty, adjustable end links replace the factory sway bar links, eliminating the flex and play that develops in worn factory links — and letting you remove sway bar preload after lowering.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEliminates sway bar preload on installation\u003c\/li\u003e\n\u003cli\u003e90–115mm adjustable length, 12mm ball stud — up to 25mm centre-to-centre on-car adjustment\u003c\/li\u003e\n\u003cli\u003eHeavy-duty steel ball joints that rotate to any angle\u003c\/li\u003e\n\u003cli\u003eAnodized alloy body for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eLimited lifetime warranty.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits Nissan 350Z (Z33, 2003–2009), Infiniti G35 (2003–2008), and Chevrolet Corvette (1997–2019, includes C6 and C7) — confirm your exact year\/chassis before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":52644337451306,"sku":"whlKLC110","price":181.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/contents_e7effa58-5651-4100-8e75-1c9e114dfe3d.jpg?v=1789666090"},{"product_id":"moroso-97-04-chevrolet-corvette-coolant-expansion-tank-direct-bolt-in-replacement","title":"Moroso 97-04 Chevrolet Corvette Coolant Expansion Tank - Direct Bolt-In Replacement","description":"\u003cp\u003eMoroso coolant expansion tank for the 97-04 Chevrolet Corvette. A fabricated aluminum tank replaces the factory plastic reservoir that goes brittle and splits with age and heat. Aluminum handles underhood temperature and pressure that plastic does not, and it is the part you stop worrying about on a track weekend.\u003c\/p\u003e\u003ch3\u003eDetails\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e 97-04 Chevrolet Corvette\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Direct bolt-in replacement — uses the factory mounting points and hose connections\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 63787\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWorth knowing\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePlastic expansion tanks are a common failure point on hot-running and tuned cars; replacing one before it lets go is cheaper than the tow.\u003c\/li\u003e\n\u003cli\u003eRefill and bleed the cooling system properly after fitting, and check the cap seals against the new tank.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions or installation\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and we install what we sell. \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e if you need help choosing the right part, or \u003ca href=\"\/pages\/appointment\"\u003ebook an appointment\u003c\/a\u003e for installation.\u003c\/p\u003e","brand":"Moroso","offers":[{"title":"Default Title","offer_id":52787114180906,"sku":"mor63787","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/cc3035291811eb9192c781bb6b561da5.jpg?v=1790609860"},{"product_id":"moroso-05-13-chevrolet-corvette-coolant-expansion-tank-direct-bolt-in-replacement","title":"Moroso 05-13 Chevrolet Corvette Coolant Expansion Tank - Direct Bolt-In Replacement","description":"\u003cp\u003eMoroso coolant expansion tank for the 05-13 Chevrolet Corvette. A fabricated aluminum tank replaces the factory plastic reservoir that goes brittle and splits with age and heat. Aluminum handles underhood temperature and pressure that plastic does not, and it is the part you stop worrying about on a track weekend.\u003c\/p\u003e\u003ch3\u003eDetails\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e 05-13 Chevrolet Corvette\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Direct bolt-in replacement — uses the factory mounting points and hose connections\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 63808\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWorth knowing\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePlastic expansion tanks are a common failure point on hot-running and tuned cars; replacing one before it lets go is cheaper than the tow.\u003c\/li\u003e\n\u003cli\u003eRefill and bleed the cooling system properly after fitting, and check the cap seals against the new tank.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions or installation\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and we install what we sell. \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e if you need help choosing the right part, or \u003ca href=\"\/pages\/appointment\"\u003ebook an appointment\u003c\/a\u003e for installation.\u003c\/p\u003e","brand":"Moroso","offers":[{"title":"Default Title","offer_id":52787116146986,"sku":"mor63808","price":332.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/d468a3cb29eb723bc9eea4f2855e34ce.jpg?v=1790609885"},{"product_id":"girodisc-05-13-chevrolet-corvette-z06-grand-sport-c6-slotted-front-rotors","title":"GiroDisc 05-13 Chevrolet Corvette Z06\/Grand Sport (C6) Slotted Front Rotors","description":"\u003cp\u003eGiroDisc two-piece slotted front rotors for the 05-13 Chevrolet Corvette Z06\/Grand Sport (C6). These replace the factory one-piece front rotors with a lighter, rebuildable floating assembly built for repeated track use.\u003c\/p\u003e\u003ch3\u003eWhy a GiroDisc two-piece rotor\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloating two-piece design.\u003c\/strong\u003e A cast iron disc ring is mounted to a central hat with high-strength alloy steel drive pins, so the ring can expand axially and radially with heat instead of fighting the hat. Anti-noise spring washers keep the float silent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6061-T6 aluminum hat.\u003c\/strong\u003e The hat is machined from U.S.-sourced 6061-T6 aircraft-specification aluminum, cutting rotating and unsprung weight against the one-piece factory casting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved internal vanes\u003c\/strong\u003e act as a centrifugal pump, forcing cooling air through the disc on track.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted, not cross-drilled.\u003c\/strong\u003e Slots sweep the pad face clean without the stress risers that make drilled rotors crack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRebuildable.\u003c\/strong\u003e When the iron is worn out you replace the rings only and keep the hats and hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Chevrolet Corvette (C5\/C6)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e A1-117\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePriced and sold as a pair — one complete front axle set.\u003c\/li\u003e\n\u003cli\u003eTwo-piece rotor assemblies with aluminum hats, iron rings and all mounting hardware, assembled and ready to bolt on.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can bed the system in and \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787506512170,"sku":"girA1-117","price":1050.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/408mm72v__94737.1677861504.jpg?v=1790619426"},{"product_id":"girodisc-05-13-chevrolet-corvette-zr1-c6-incl-z06-carbon-edition-slotted-front-rotors","title":"GiroDisc 05-13 Chevrolet Corvette ZR1 (C6 Incl Z06\/Carbon Edition) Slotted Front Rotors","description":"\u003cp\u003eGiroDisc two-piece slotted front rotors for the 05-13 Chevrolet Corvette ZR1 (C6 Incl Z06\/Carbon Edition). These replace the factory one-piece front rotors with a lighter, rebuildable floating assembly built for repeated track use.\u003c\/p\u003e\u003ch3\u003eWhy a GiroDisc two-piece rotor\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloating two-piece design.\u003c\/strong\u003e A cast iron disc ring is mounted to a central hat with high-strength alloy steel drive pins, so the ring can expand axially and radially with heat instead of fighting the hat. Anti-noise spring washers keep the float silent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6061-T6 aluminum hat.\u003c\/strong\u003e The hat is machined from U.S.-sourced 6061-T6 aircraft-specification aluminum, cutting rotating and unsprung weight against the one-piece factory casting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved internal vanes\u003c\/strong\u003e act as a centrifugal pump, forcing cooling air through the disc on track.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted, not cross-drilled.\u003c\/strong\u003e Slots sweep the pad face clean without the stress risers that make drilled rotors crack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRebuildable.\u003c\/strong\u003e When the iron is worn out you replace the rings only and keep the hats and hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Chevrolet Corvette (C5\/C6)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e A1-145\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant fitment notes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eC6 Incl Z06\/Carbon Edition.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePriced and sold as a pair — one complete front axle set.\u003c\/li\u003e\n\u003cli\u003eTwo-piece rotor assemblies with aluminum hats, iron rings and all mounting hardware, assembled and ready to bolt on.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can bed the system in and \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787509264682,"sku":"girA1-145","price":1450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/408mm72v__29451.1677861516.jpg?v=1790619424"},{"product_id":"girodisc-05-13-chevrolet-corvette-zr1-c6-incl-z06-carbon-edition-slotted-rear-rotors","title":"GiroDisc 05-13 Chevrolet Corvette ZR1 (C6 Incl Z06\/Carbon Edition) Slotted Rear Rotors","description":"\u003cp\u003eGiroDisc two-piece slotted rear rotors for the 05-13 Chevrolet Corvette ZR1 (C6 Incl Z06\/Carbon Edition). These replace the factory one-piece rear rotors with a lighter, rebuildable floating assembly built for repeated track use.\u003c\/p\u003e\u003ch3\u003eWhy a GiroDisc two-piece rotor\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloating two-piece design.\u003c\/strong\u003e A cast iron disc ring is mounted to a central hat with high-strength alloy steel drive pins, so the ring can expand axially and radially with heat instead of fighting the hat. Anti-noise spring washers keep the float silent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6061-T6 aluminum hat.\u003c\/strong\u003e The hat is machined from U.S.-sourced 6061-T6 aircraft-specification aluminum, cutting rotating and unsprung weight against the one-piece factory casting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved internal vanes\u003c\/strong\u003e act as a centrifugal pump, forcing cooling air through the disc on track.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted, not cross-drilled.\u003c\/strong\u003e Slots sweep the pad face clean without the stress risers that make drilled rotors crack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRebuildable.\u003c\/strong\u003e When the iron is worn out you replace the rings only and keep the hats and hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Chevrolet Corvette (C5\/C6)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e A2-184\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant fitment notes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eC6 Incl Z06\/Carbon Edition.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePriced and sold as a pair — one complete rear axle set.\u003c\/li\u003e\n\u003cli\u003eTwo-piece rotor assemblies with aluminum hats, iron rings and all mounting hardware, assembled and ready to bolt on.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can bed the system in and \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787515359530,"sku":"girA2-184","price":1450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/408mm72v__55504.1677861700.jpg?v=1790619819"},{"product_id":"girodisc-05-13-chevrolet-corvette-z06-grand-sport-c6-slotted-front-rings","title":"GiroDisc 05-13 Chevrolet Corvette Z06\/Grand Sport (C6) Slotted Front Rings","description":"\u003cp\u003eGiroDisc replacement cast iron rotor rings for the 05-13 Chevrolet Corvette Z06\/Grand Sport (C6), front axle. When the iron is worn or heat-checked, you replace the rings and keep the hats — the reason a two-piece rotor is cheaper to own over time.\u003c\/p\u003e\u003ch3\u003eAbout replacement rings\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRings only — \u003cstrong\u003ealuminum hats are not included\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eNew installation hardware (cap screws, hardened washers and anti-noise spring washers) is supplied. GiroDisc does not recommend reusing old hardware.\u003c\/li\u003e\n\u003cli\u003eSlotted friction surface with curved internal cooling vanes, same specification as the original assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThese rings are machined for GiroDisc hats and will not mount to factory center hats.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Chevrolet Corvette (C5\/C6)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e D1-117\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePriced and sold as a pair — one axle set of rings, plus new mounting hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can bed the system in and \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787515654442,"sku":"girD1-117","price":680.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/rings__43972.1689725177.jpg?v=1790620193"},{"product_id":"girodisc-97-13-chevrolet-corvette-z51-c5-c6-slotted-front-rotors","title":"GiroDisc 97-13 Chevrolet Corvette Z51 (C5\/C6) Slotted Front Rotors","description":"\u003cp\u003eGiroDisc two-piece slotted front rotors for the 97-13 Chevrolet Corvette Z51 (C5\/C6). These replace the factory one-piece front rotors with a lighter, rebuildable floating assembly built for repeated track use.\u003c\/p\u003e\u003ch3\u003eWhy a GiroDisc two-piece rotor\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloating two-piece design.\u003c\/strong\u003e A cast iron disc ring is mounted to a central hat with high-strength alloy steel drive pins, so the ring can expand axially and radially with heat instead of fighting the hat. Anti-noise spring washers keep the float silent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6061-T6 aluminum hat.\u003c\/strong\u003e The hat is machined from U.S.-sourced 6061-T6 aircraft-specification aluminum, cutting rotating and unsprung weight against the one-piece factory casting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved internal vanes\u003c\/strong\u003e act as a centrifugal pump, forcing cooling air through the disc on track.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted, not cross-drilled.\u003c\/strong\u003e Slots sweep the pad face clean without the stress risers that make drilled rotors crack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRebuildable.\u003c\/strong\u003e When the iron is worn out you replace the rings only and keep the hats and hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Chevrolet Corvette (C5\/C6)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e A1-096\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant fitment notes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eC5\/C6.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePriced and sold as a pair — one complete front axle set.\u003c\/li\u003e\n\u003cli\u003eTwo-piece rotor assemblies with aluminum hats, iron rings and all mounting hardware, assembled and ready to bolt on.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can bed the system in and \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787520012586,"sku":"girA1-096","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/408mm72v__60624.1677861492.jpg?v=1790619448"},{"product_id":"girodisc-97-13-chevrolet-corvette-z51-c5-c6-slotted-front-rings","title":"GiroDisc 97-13 Chevrolet Corvette Z51 (C5\/C6) Slotted Front Rings","description":"\u003cp\u003eGiroDisc replacement cast iron rotor rings for the 97-13 Chevrolet Corvette Z51 (C5\/C6), front axle. When the iron is worn or heat-checked, you replace the rings and keep the hats — the reason a two-piece rotor is cheaper to own over time.\u003c\/p\u003e\u003ch3\u003eAbout replacement rings\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRings only — \u003cstrong\u003ealuminum hats are not included\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eNew installation hardware (cap screws, hardened washers and anti-noise spring washers) is supplied. GiroDisc does not recommend reusing old hardware.\u003c\/li\u003e\n\u003cli\u003eSlotted friction surface with curved internal cooling vanes, same specification as the original assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThese rings are machined for GiroDisc hats and will not mount to factory center hats.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Chevrolet Corvette (C5\/C6)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e D1-096\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant fitment notes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eC5\/C6.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePriced and sold as a pair — one axle set of rings, plus new mounting hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can bed the system in and \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787552583978,"sku":"girD1-096","price":630.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/rings__48884.1689725172.jpg?v=1790620195"},{"product_id":"girodisc-05-13-chevrolet-corvette-zr1-c6-incl-z06-carbon-edition-slotted-rear-rings","title":"GiroDisc 05-13 Chevrolet Corvette ZR1 (C6 Incl Z06\/Carbon Edition) Slotted Rear Rings","description":"\u003cp\u003eGiroDisc replacement cast iron rotor rings for the 05-13 Chevrolet Corvette ZR1 (C6 Incl Z06\/Carbon Edition), rear axle. When the iron is worn or heat-checked, you replace the rings and keep the hats — the reason a two-piece rotor is cheaper to own over time.\u003c\/p\u003e\u003ch3\u003eAbout replacement rings\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRings only — \u003cstrong\u003ealuminum hats are not included\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eNew installation hardware (cap screws, hardened washers and anti-noise spring washers) is supplied. GiroDisc does not recommend reusing old hardware.\u003c\/li\u003e\n\u003cli\u003eSlotted friction surface with curved internal cooling vanes, same specification as the original assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThese rings are machined for GiroDisc hats and will not mount to factory center hats.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Chevrolet Corvette (C5\/C6)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e D2-184\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant fitment notes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eC6 Incl Z06\/Carbon Edition.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePriced and sold as a pair — one axle set of rings, plus new mounting hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can bed the system in and \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787558875434,"sku":"girD2-184","price":880.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/rings__00704.1689725278.jpg?v=1790619989"},{"product_id":"girodisc-97-13-chevrolet-corvette-z51-c5-c6-front-titanium-pad-shields","title":"GiroDisc 97-13 Chevrolet Corvette Z51 (C5\/C6) Front Titanium Pad Shields","description":"\u003cp\u003eGiroDisc titanium pad shields for the 97-13 Chevrolet Corvette Z51 (C5\/C6), front axle. A thin titanium shim sits between the pad backing plate and the caliper pistons, so braking heat stays in the pad instead of soaking into the pistons and brake fluid.\u003c\/p\u003e\u003ch3\u003eWhy titanium shims\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTitanium has very low thermal conductivity — it is the simplest way to keep fluid temperatures down on long track sessions and stop a soft or long pedal late in a run.\u003c\/li\u003e\n\u003cli\u003eWater-jet cut to the exact pad shape: no cutting, grinding or fitting required.\u003c\/li\u003e\n\u003cli\u003eWorks with your existing pads and calipers; fit them at your next pad change.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Chevrolet Corvette (C5\/C6)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e TS-0731-4\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant fitment notes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eC5\/C6.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePriced per axle — four shields, one per pad.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can bed the system in and \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787560808746,"sku":"girTS-0731-4","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/ts__60318.1638316286.jpg?v=1790620433"},{"product_id":"girodisc-97-13-chevrolet-corvette-z51-c5-c6-rear-titanium-pad-shields","title":"GiroDisc 97-13 Chevrolet Corvette Z51 (C5\/C6) Rear Titanium Pad Shields","description":"\u003cp\u003eGiroDisc titanium pad shields for the 97-13 Chevrolet Corvette Z51 (C5\/C6), rear axle. A thin titanium shim sits between the pad backing plate and the caliper pistons, so braking heat stays in the pad instead of soaking into the pistons and brake fluid.\u003c\/p\u003e\u003ch3\u003eWhy titanium shims\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTitanium has very low thermal conductivity — it is the simplest way to keep fluid temperatures down on long track sessions and stop a soft or long pedal late in a run.\u003c\/li\u003e\n\u003cli\u003eWater-jet cut to the exact pad shape: no cutting, grinding or fitting required.\u003c\/li\u003e\n\u003cli\u003eWorks with your existing pads and calipers; fit them at your next pad change.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Chevrolet Corvette (C5\/C6)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e TS-0732-4\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant fitment notes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eC5\/C6.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePriced per axle — four shields, one per pad.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can bed the system in and \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787560841514,"sku":"girTS-0732-4","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/ts__30388.1638316286.jpg?v=1790620420"},{"product_id":"girodisc-05-13-chevrolet-corvette-z06-c6-w-1-piece-pad-titanium-pad-shields","title":"GiroDisc 05-13 Chevrolet Corvette Z06 (C6 w\/1-Piece Pad) Titanium Pad Shields","description":"\u003cp\u003eGiroDisc titanium pad shields for the 05-13 Chevrolet Corvette Z06 (C6 w\/1-Piece Pad), front\/rear axle. A thin titanium shim sits between the pad backing plate and the caliper pistons, so braking heat stays in the pad instead of soaking into the pistons and brake fluid.\u003c\/p\u003e\u003ch3\u003eWhy titanium shims\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTitanium has very low thermal conductivity — it is the simplest way to keep fluid temperatures down on long track sessions and stop a soft or long pedal late in a run.\u003c\/li\u003e\n\u003cli\u003eWater-jet cut to the exact pad shape: no cutting, grinding or fitting required.\u003c\/li\u003e\n\u003cli\u003eWorks with your existing pads and calipers; fit them at your next pad change.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Chevrolet Corvette (C5\/C6)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e TS-1185-4\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant fitment notes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eC6 w\/1-Piece Pad.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePriced per axle — four shields, one per pad.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can bed the system in and \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787561038122,"sku":"girTS-1185-4","price":115.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/ts__97319.1638316289.jpg?v=1790620418"},{"product_id":"girodisc-97-13-chevrolet-corvette-z51-c5-c6-slotted-rear-rotors","title":"GiroDisc 97-13 Chevrolet Corvette Z51 (C5\/C6) Slotted Rear Rotors","description":"\u003cp\u003eGiroDisc two-piece slotted rear rotors for the 97-13 Chevrolet Corvette Z51 (C5\/C6). These replace the factory one-piece rear rotors with a lighter, rebuildable floating assembly built for repeated track use.\u003c\/p\u003e\u003ch3\u003eWhy a GiroDisc two-piece rotor\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloating two-piece design.\u003c\/strong\u003e A cast iron disc ring is mounted to a central hat with high-strength alloy steel drive pins, so the ring can expand axially and radially with heat instead of fighting the hat. Anti-noise spring washers keep the float silent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6061-T6 aluminum hat.\u003c\/strong\u003e The hat is machined from U.S.-sourced 6061-T6 aircraft-specification aluminum, cutting rotating and unsprung weight against the one-piece factory casting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved internal vanes\u003c\/strong\u003e act as a centrifugal pump, forcing cooling air through the disc on track.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted, not cross-drilled.\u003c\/strong\u003e Slots sweep the pad face clean without the stress risers that make drilled rotors crack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRebuildable.\u003c\/strong\u003e When the iron is worn out you replace the rings only and keep the hats and hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Chevrolet Corvette (C5\/C6)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e A2-324\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant fitment notes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eC5\/C6.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePriced and sold as a pair — one complete rear axle set.\u003c\/li\u003e\n\u003cli\u003eTwo-piece rotor assemblies with aluminum hats, iron rings and all mounting hardware, assembled and ready to bolt on.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can bed the system in and \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787562971434,"sku":"girA2-324","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/408mm72v_0020__70915.1680802680.jpg?v=1790619770"},{"product_id":"girodisc-97-13-chevrolet-corvette-z51-c5-c6-slotted-rear-rings","title":"GiroDisc 97-13 Chevrolet Corvette Z51 (C5\/C6) Slotted Rear Rings","description":"\u003cp\u003eGiroDisc replacement cast iron rotor rings for the 97-13 Chevrolet Corvette Z51 (C5\/C6), rear axle. When the iron is worn or heat-checked, you replace the rings and keep the hats — the reason a two-piece rotor is cheaper to own over time.\u003c\/p\u003e\u003ch3\u003eAbout replacement rings\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRings only — \u003cstrong\u003ealuminum hats are not included\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eNew installation hardware (cap screws, hardened washers and anti-noise spring washers) is supplied. GiroDisc does not recommend reusing old hardware.\u003c\/li\u003e\n\u003cli\u003eSlotted friction surface with curved internal cooling vanes, same specification as the original assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThese rings are machined for GiroDisc hats and will not mount to factory center hats.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Chevrolet Corvette (C5\/C6)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e D2-324\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant fitment notes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eC5\/C6.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePriced and sold as a pair — one axle set of rings, plus new mounting hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrders are processed within 1–3 business days; standard delivery is 3–7 business days within the United States.\u003c\/li\u003e\n\u003cli\u003eWe currently ship within the U.S. only. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused parts in original packaging — see our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation at Team ANBD\u003c\/h3\u003e\u003cp\u003eTeam ANBD is a performance shop in Andover, New Jersey, and brakes are what we do. We handle \u003ca href=\"\/pages\/big-brake-kit-installation-nj\"\u003ebig brake and rotor installation\u003c\/a\u003e in house and can bed the system in and \u003ca href=\"\/pages\/performance-alignment-corner-balancing-nj\"\u003ealign or corner-balance\u003c\/a\u003e the car in the same visit. \u003ca href=\"\/pages\/appointment\"\u003eBook an appointment\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us about fitment\u003c\/a\u003e before you order.\u003c\/p\u003e","brand":"GiroDisc","offers":[{"title":"Default Title","offer_id":52787567558954,"sku":"girD2-324","price":630.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/6358\/8650\/files\/rings__75392.1689725287.jpg?v=1790619965"}],"url":"https:\/\/team-anbd.com\/collections\/chevrolet-corvette-c5-c6.oembed","provider":"Team ANBD","version":"1.0","type":"link"}